Everything posted by Pizza Bob
-
Sig Sauer P226 e2
It's a rehash (albeit, a good one) of the regular P226. What makes it slimmer is the wrap-around (from the rear) grip, accomplished by using a new mainspring arrangement and their Short Reset Trigger and possibly the short trigger as well - not sure on that. The P226 and its double-stack cousin the P229 are a real handful, literally, and this is a great way for those with smaller hands to experience the "Signess". I haven't held one so I don't know how significant (no pun intended) the difference. Sigs aluminum grips made the difference for me. Adios, Pizza Bob
-
Pawn Stars marathon on now on History
Drew: Antiques Roadshow is on every Monday night at 8 AM on WHYY, the PBS affiliate out of Philly. I believe that it is repeated on the NJ PBS station (WNJS?) out of Trenton on Saturday nights at 8. My favorite show also and one of the regular appraisers is a friend of mine. Adios, Pizza Bob
-
Philly confiscates guns from legal non-resident permit holde
The NRA's scope is national. ANJRPC is the state chapter of the NRA. They are active on the state level (maybe not as active as some would like), and doing what they are supposed to be doing, as is the NRA at the national level. Not saying we shouldn't criticize if an entity is not accomplishing its mission, but understand what that is and don't be a devisive factor in the overall struggle. JMHO Adios, Pizza Bob
-
Need an FFL near Morristown to handle a transfer.
You can search on Gun Broker. The listing also has the fees charged, however, call the dealer and find out what is included in the fee posted. Often times it does not include NICS ($15 here in NJ). If it is a handgun, they may also charge for the postage for registered mail to distribute the copies of the P2P, and then there is the state sales tax. I like to look for a dealer that does not retail firearms - they are getting harder to find, but a repair guy/gunsmith that works from their residence is ideal. Low overhead and no axe to grind about, "I could have ordered this for you, why'd you buy it on the Internet", whether those feelings are expressed or not, they certainly factor in to how you are treated. A non-retail guy is glad to get the extra money for doing some paperwork and running it through their books. Good luck with your quest. Adios, Pizza Bob
-
Philly confiscates guns from legal non-resident permit holde
So what you are saying is that if we live in NJ, we can still go into philly with our FL permits? That is absolutely correct. At this point PA residents are also legal to carry on an out of state permit. The Lentz bill has yet to come up for a vote and since the rest of PA would just as soon give Philly to NJ, it's unlikely this bill will gain any traction in the PA legislature. But, as written, it is only aimed at PA residents. In PA they don't - they have pre-emption. However, that has never stopped Philly (and few other burgs around the state with anti-2A mayors) from passing laws that violate that pre-emption. Just once I'd like to see one of these a$$hats get prosecuted for violating state law - that would put an end to it pretty darn quick. As it is, if you get charged under one of these illegal laws, you have to spend money to defend yourself, up to the point a judge throws it out. Don't know if you can recover any of that - doubtful. Adios, Pizza Bob
-
Philly confiscates guns from legal non-resident permit holde
The article refers to the Florida Loophole - that is PA residents carrying concealed on a FL permit - not PA non-residents doing the same. Non-residents have nothing to fear (well, one never knows which way the Philly PD is going to go). No less illegal picking on PA residents, but the Philly police seem to write their own laws and let the courts sort things out. There are bills in the PA legislature to prevent PA residents carrying on out of state permits. Sponsor was a guy named Lentz. Here's a better one for you: After her son was killed in 2008, Sherderian Sutton got a Philadelphia license to carry a concealed weapon and a small Ruger pistol to protect herself and her surviving children. On Monday, when police knocked on her door, Sutton hoped that they were bringing the news she's waited two years to hear. "I thought they were coming to my door to tell me they had my son's murderer," she said. "But they were coming to take me and my gun, and now I'm defenseless." Sutton, 38, of North Philadelphia, said that her troubles began last week, when workers from Wilco Cable came to her back door to ask for permission to work in her yard. She's never had cable, but told them that they could work through her back yard to connect her neighbors' cable. Sutton said that she also asked the workers to never use the back door again. On Monday, Sutton said, she was awakened by incessant pounding on her back door about 8 a.m. She looked out of the window and saw two men and a woman at her back door, peering in her window. Scared, Sutton said she grabbed her gun and held it at her side as she answered the door. She said that she never left her house and never raised the gun. Although they had no identification tags, Sutton said that the three identified themselves as Wilco workers and again asked permission to work on her property. She granted it, but asked why they continued to knock on her back door, despite her previous requests to use the front door. Sutton said that the workers went about their business but three hours later, about 11:25 a.m., police came to her door. She said she let them in and they went through her house - with guns drawn - even pointing them at her 14- and 16-year-old children. She said that she was taken into custody, held for 12 hours - from 2 p.m. to 2 a.m. - and that her gun and her license to carry it were taken away from her. According to court records, Sutton, who has no record, was charged with simple assault and possessing instruments of a crime, both misdemeanors. Lt. Frank Vanore, police spokesman, said that according to the police report, the cable workers alleged that Sutton was pointing a gun at them when she opened the back door. What neither side seems to dispute is that Sutton never left her house. Even though a citizen is not required to have a license to carry a firearm in his or her own house, Sutton did, and had both the license and her gun taken away as a result of the incident. Here's the link: http://www.philly.com/philly/news/20100 ... e_gun.html And you thought NJ was bad. Adios, Pizza Bob
-
Air Soft Guns in NJ
OK, I've read the link, but there is still nothing that states categorically that airsoft is legal. There seems to be quite a bit of contention, even on that website, as to whether they are considered firearms. Even the proposed legislation is termed a "clarification", thus removing all doubt, but it still leaves it up in the air as to whether airsoft meets the current definition of a firearm. This is something that could bite you on the ass down the road. All it would take would be one incident like that in Florida for airsoft to come under scrutiny and then, all of a sudden, it would be, "Well of course they're firearms - just look at the definition". Please don't misconstrue my statements to be anti-gun - I'm just playing devil's advocate and interpreting the law in one possible manner. We all know that most NJ firearms laws are written with so much "wiggle room" that they can practically mean anything the prosecuting attorney wants them to. Just be careful. Adios, Pizza Bob
-
Air Soft Guns in NJ
Give me a cite or precedent - as you know in NJ unless specifically pre-empted things dealing with firearms are illegal. You all seem to be making the (false) assumption that because something is sold here it's legal. I'm just playing devil's advocate here, but Christie's AG is no friend to firearms and air soft may just be a little niche that is overlooked. The whole thing really hinges on whether air soft pellets are capable of causing injury. I shot a full-auto airsoft, at a mfg's demo and the 6mm pellets easily penetrated a std IPSC cardboard silhouette at 7 yds. Just remember, with the exception of the gray area, as to whether they can injure or not, they do meet NJ's definition of a firearm. Adios, Pizza Bob
-
First pistol
Shawn: I agree that, if you get the opportunity, you should shoot the guns you are interested in, before buying. Might also be a good idea to start with a 9mm as opposed to the .40, for less recoil and more importantly, less cost. You list two widely disparate guns of interest. I've never been a Taurus fan - although many here are. The "Judge" seems to me to be a solution looking for a problem. For your uses, the Sig would seem to be the better way to go (thus the suggestion for 9mm). The criticisms of the 250 generally center around the long trigger reset. I think that is just something you have to get used to - as with most things requiring repetitive motions, it's more about muscle memory than anything else. The 250 gives you the flexibility to build into a full-size or subcompact if you wish - even changing calibers. All this without the need for more permits (the fire control module is the serial numbered part - all else can be purchased through the mail, if desired). The trigger on the 250 is wonderful and will spoil you for just about any other DA trigger. Smooth and light with no "stack" - great for a defensive handgun IMHO. Welcome to the world of firearms and good luck. Adios, Pizza Bob
-
Air Soft Guns in NJ
That can be a dangerous assumption, especially given that your second statement is true... "Firearm or firearms" means any handgun, rifle, shotgun, machine gun, automatic or semi-automatic rifle, or any gun, device or instrument in the nature of a weapon from which may be fired or ejected any solid projectable ball, slug, pellet, missile or bullet, or any gas, vapor or other noxious thing, by means of a cartridge or shell or by the action of an explosive or the igniting of flammable or explosive substances. It shall also include, without limitation, any firearm, which is in the nature of an air gun, spring gun or pistol or other weapon of a similar nature in which the propelling force is a spring, elastic band, carbon dioxide, compressed or other gas or vapor, air or compressed air, or is ignited by compressed air, and ejecting a bullet or missile smaller than three-eighths of an inch in diameter, with sufficient force to injure a person. The only gray area is the "sufficient force to injure a person." Hit someone in the eye with an airsoft pellet and find yourself facing firearms charges?!? There are manufacturers (I used to work for one) whose attorneys will not let them sell airsoft in NJ, because of the way a firearm is defined. I think a blind eye is being turned here, until something happens that focuses attention on the air soft guns. JMHO Adios, Pizza Bob
-
The New Remington R1
Andris: Are you saying that your PD will only issue one permit at a time? That's bogus, as we've heard over and over again. Contact the NJSP Firearms Unit and tell them what is going on - they'll call your local PD and straighten them out. There is no limit as to how many permits you can apply for/get at one time - just how many you can use in a given time period. I am impressed with the R1 - nice thing is that it's made right here in the good old U. S. of A. Good luck. Adios, Pizza Bob
-
HELP!! BULLET PUSHING INTO .45 BRASS??
Still doesn't answer the question: Are you roll-crimping or taper-crimping? The looseness might be more severe with different brands due to the thickness of the case. If you are already taper-crimping, then I've got nothing. Good luck. Adios, Pizza Bob
-
Putting a scope mount on a Marlin Model 780
While I am not specifically familiar with the Marlin 780, mounting a scope isn't rocket science. You have to go slow, make sure you have the right components and test fit things before torquing everything down. Most .22's have a grooved receiver (a dovetail on top of the receiver). European guns (Anschutz, CZ etc) use an 11 mm dovetail. U.S. built rifles use a 3/8" dovetail. The dovetail eliminates the need for bases. The rings mount directly to the receiver dovetail. Since recoil isn't really an issue, you can use relatively inexpensive aluminum rings - Leupold makes their rifleman series in a 3/8" dovetail and they run about $12 - $15 a set. You need to insure that the rings are high enough that the objective bell of the scope will clear the barrel. I like to try and keep the centerline (CL) of the scope as close to the CL of the bore as possible, for less parallax. Do not use any kind of Loc-Tite on the rings. Do not overtorque. Most ring sets come with an allen (or torx) wrench - use this, it is of a size that makes it difficult to overtorque your fasteners. If your receiver isn't dovetailed (it probably is) then you will need a set of scope bases or a one-piece scope base. Cross this bridge when/if you come to it. You should get a scope that is made for rimfires. If they are of the fixed parallax variety, the distance at which the parallax is set is closer (more typical rimfire ranges) than that of a centerfire scope. If you are getting something with adjustable parallax (AO or SF), a rimfire scope will, again, focus down closer to more typical rimfire distances. Have fun. I have two left hands when it comes to any kind of manual skill, but even I can mount a scope. Good luck & have fun. Adios, Pizza Bob
-
HELP!! BULLET PUSHING INTO .45 BRASS??
Are you using the seater/crimp die that came with your three die set? If so, chances are that it is a roll-crimp die. For semi-auto pistol (rimless) cartridges that headspace on the mouth of the case (theoretically) you need to use a separate taper-crimp die. The die that came with your set will have a shoulder in it. This shoulder rolls the case mouth into the cannelure or crimp groove, if there is one - if there isn't, you will lessen the neck tension on the bullet. Roll-crimps should be used for revolvers - especially heavy recoiling ones. A taper-crimp die swages the case against the bullet (no shoulder in the die), thus preserving the edge of the case mouth. Sounds like maybe you are using a standard roll-crimp die. Adios, Pizza Bob
-
Small pistol primers in 45ACP?
The small primer .45 ACP brass is from the various manufacturer's non-toxic lines. Along with lead-free bullets they have to use lead-free priming compounds in the primers. The lead-free compound (Dinol) is hotter than the regular lead-based compound, therefore a smaller amount is needed - thus the small primers. Most manufacturers say these are non-reloadable, but a lot of people have been having good success with them. Some actually finding an increase in accuracy, although accompanied by a velocity loss of 30 - 40 fps. One thing to be careful of - some of the spp .45's have larger flash holes than normal. Not sure if this presents a problem, but I'd separate the brass by headstamp as there may be a performance difference between those with the larger flash hole and those with normal sized holes. In order to discourage reloading these, I understand that Federal crimps the primers on their .45 spp brass. There is a great deal of experimenting going on right now with this brass. If you are going to play with it, work your loads up, don't start at the top. Some are experimenting with magnum pistol primers, but I believe the accuracy gains are with regular small pistol primers. This is a boon to those of you that load both 9mm and .45, as it means you don't have change over the priming system on your press. Be careful. YMMV. Adios, Pizza Bob
-
They're in !!!!!!!!!!!!!
Some of us are more optimistic than others. Some of us live near the border and escape whenever possible. Some of us don't expect to live in NJ forever.
-
They're in !!!!!!!!!!!!!
I think you mean Bodyguard. No NG series in .380. There is the 315NG in .38 Spl. Have fun shopping. Adios, Pizza Bob
-
Speed Strip?
You obviously have never disassembled a Ruger .22 auto for cleaning. Some will say, "There's nothing to it", while others will curse the designer and wish them a slow & painful death. My opinion is everybody ought to own one at least once - kinda like a British sports car. Adios, Pizza Bob
-
Another oil rig explosion?
Where is usnmars this week?
-
Speed Strip?
I assume that he's talking about these... http://www.majesticarms.com/id10.html ...and not Bianchi speed strips. I've used the latter, but not the former. Looks like a pretty slick idea, but not sure I like the amount the new bolt stop pin protrudes above the receiver. If it works as advertised it certainly would stop a lot of pissing & moaning from Ruger owners. Why don't you be our guinea pig and give us a full report? Adios, Pizza Bob
-
Rifle scopes
Let's bring this back on the topic. This sniping back & forth isn't very constructive. What the OP should take away from these posts is that there is a lot of variety in the optics world, and people tend to feel passionately about their choices. Not sure that a lot of us have the experience, or a discerning enough eye to really tell the difference between the really high-end optics (S&B, Nightforce and to a lesser degree Leupold Mk IV's) and the more common stuff. At the lower end of the scale you have a plethora of Chinese optics - some just the lenses and others the entire scope. You do get what you pay for, but an argument about the merits of a Mueller $115 scope over a Bushnell $50 is just specious. You should be aware that there are differences between scopes designated as "rimfire" and those that are not. It has nothing to do with quailty. The difference is where the parallax is set. If you get something like the 3x9, it does not have an adjustable objective (AO) lens. The parallax is set at the factory at a compromise distance - this distance is closer for rimfire (RF) scopes than it is for those meant for centerfire (CF) application. On scopes with an AO, the closest distance shown on the objective bell (or knob if it is a side focus) is, again, closer on RF scopes than on CF ones. That does not mean you can't use a CF scope on a RF gun, it only means that doing so may limit the utility of the RF by precluding shooting at typical RF distances. Since you specified 100 yards, you'd be GTG with either. As for your .308: You have a precision instrument and the idea is to put all shots in one hole. You also specified that you want to shoot out to 300 yards and more (if the opportunity presents itself). You can spend anywhere from under $100 for Chinese optics to $3000 for something like a Schmidt & Bender. As I stated before, it's doubtful that many of us have the experience, the need or the ability to make full use of the top-end optics, but that doesn't mean you should scrimp either. With all items there is a cost to benefit ratio that decreases as you go up the price scale. In other words - at the lower price points, not a whole lot more money may buy you a whole lot more quality. You will reach a point where it will take a whole lot of money to buy a barely (if at all) discernible increment in quality. Depends on your budget where you "get-off" on that curve. I like to pick the highest I think I can afford and then go one increment higher. I'm a believer in buy quality and only cry once. Don't interpret that to mean I have all high-end optics on my rifles. I have my favorites just like everyone else. I try to avoid Chinese stuff. I think Weaver is probably the minimum quality scope I'd use. I like Leupolds (some may think they are overpriced, but I like the "made in USA" factor). I have a couple Bushnell Elites (3200 & 4200) and would like to try a 6500 next time. It's a personal choice based on your needs, preferences and budget. Go into it with your eyes open and do your research first. As suggested, look through scopes you are interested in - attend some of the group shoots the board puts together - you'll find the members will be more than happy to let you sample their optics choices. I hope all this helps. Adios, Pizza Bob
-
Sulfa Powder
Sulfa powder and sulfa compounds were used extensively to prevent/fight infection before the discovery of antibiotics. Sulfa compounds are enjoying a resurgence because of all the antibiotic resistant strains of bacteria. Adios, Pizza Bob<----thinks sulfa is great with pepperoni, too
-
Need some advice on a few rifles
MAKS, the 516 IS a gas piston system, like the 556 except with a three-position valve vs. the 556's two-position one. It is NOT a gas impingement system.
-
Sig CPO guns.
As someone already pointed out, Top Gun Supply is one of your best bets. Sig tends to favor their biggest retailers with the CPO's - not only because they move product, but also because they can afford to buy a lot of product at once. Sig does not necessarily want to be in the "used gun" business, so if they do a large police trade-in, they want to process the guns as a lot and move them as a lot. Not many dealers have that kind of buying power. You will often find CPO's being sold at Big Box stores (Bass Pro, Cabelas etc) during special promotions. Bass Pro used to move them at $50 over cost during some of their promos. So TGS or a Big Box during a big promotion are your best bets. Not to say that a few onesy and twosey's don't find their way to regular dealers - and again, those that move product are more likely to be favored. Sig is direct with most of their dealers, but for the smaller guy, they do deal with wholesale distributors. Used to be RSR and Sports South, not sure that that info is current, but being distributors they may also buy CPO's in quantity. I guess ultimately what I'm saying is go very big or very small or a high turnover direct dealer. Adios, Pizza Bob
-
Need some advice on a few rifles
Not sure I understand what you're saying here. On one hand, you want the semi-auto to be chambered for 5.56. But you lose me when you say "not a regular .223/5.56". Most AR platforms are chambered in 5.56 - and you can shoot .223 through those guns. Some are chambered in Wylde, which is a compromise between the two specs and, again, will shoot 5.56 or .223. There may be some AR's that are chambered solely for .223 - those you do not want to shoot 5.56 through. Which brings me to my second point. Why get a S/A that shoots 5.56 (or .223), but then get a turnbolt that only shoots .223. It means that you will need to stockpile two types of ammo. I don't know of any commercial turnbolts that are chambered in 5.56 (not saying there aren't any, I just don't know of any), so if you need to stockpile two types of ammo anyway, you may as well make the second type the much more effective .308. It would also eliminate any chance of accidently loading a 5.56 round in you .223 turnbolt (although in reality, not much would be likely to happen). One last thing in closing - the Sig 556 is indeed a piston driven rifle - as is the new 516 (Sig's AR platform). Shotguns? Whatever floats your boat - pump / 18" barrel / sights / mag extension / pistol grip / light...whatever. Adios, Pizza Bob