Skip to content
View in the app

A better way to browse. Learn more.

New Jersey Gun Forums

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

Pizza Bob

Members
  • Joined

  • Last visited

Everything posted by Pizza Bob

  1. Hey! Round is a shape!
  2. There are two different bullet weights in .45 EFMJ (165 gr. & 200 gr.). Do you want a specific weight or are just looking for EFMJ? Can't help you find any (haven't seen any for awhile), but thought you ought to clarify, just in case. Used to get mine at the App. Promo. Gunshow at the Phila Armory. Had an ammo dealer there from Chester. I'm well stocked for now. Good luck. Adios, Pizza Bob
  3. This is an older gun. You can tell by the flat take-down latch. Adios, Pizza Bob
  4. I really like the non-railed P229 (as evidenced by the fact that I own one) - they look so much sleeker than the railed versions. Was yours a CPO? Looks to be in great shape. Mine is configured in .357 Sig, but I also have a .40 S&W barrel for it. Enjoy - it is a great gun - you did good. Adios, Pizza Bob
  5. Pizza Bob replied to jeff47's topic in Handguns
    The P250 is an interesting handgun. Like many Sig products it was/is poorly marketed. They released it in dribs and drabs, while they should have waited until all the modular components were available and then put together some nifty "pistol packs", similar to what they are now doing with their "2Sum" promotion - three years in. You have hit upon what many consider the major fault of this gun - the DAO trigger. I am definitely not a DAO kind of guy, but I'd consider one of these (I do not own one, but have a bit of trigger time and experience with the gun). The trigger is long and has a long reset point, but it is amazingly smooth - does not "stack", and is consistently light at 5.5# - 6#. I think this is great on a SD firearm. Triggers are more about getting acclimated to them, than the actual attributes - unless they are exceedingly heavy, gritty etc. The modularity of the P250 gives you the flexibility of going from a range gun to a carry gun with the same fire-control module (FC module). You can also mix & match; i.e. full-size grip-frame with a compact upper, ala Commander. Some calibers require different grip-frames (although the FC module remains the same throughout), but I believe the 9mm, 40 and 357 all use the same (the 9mm was the only one available when I went through the familiarization course). Takedown (field stripping) can be accomplished in about 15 seconds and the FC module can be "hosed-off" with gun-scrubber or the like and be easily relubed. I would also say that this is the polymer pistol for those that abhor tactical tupperware. All critical components are mounted to the fire-control module, not embedded in or pinned-through the polymer. The FC module is held in place by an integral "tail" being inserted into a slot in the grip-frame at the rear, and the take-down lever (stout) at the front. They are tough. While Sig will never own-up to it, one of their salesman had the car running over the Glock thrown up to them. The rep let the store owner run-over his sample gun's grip-frame with the FC module in place and it still functioned perfectly. Put the reps boss went into apoplexy when he found out, but the point was made. As to the Classic P-series, caliber interchangeability only exists with the 226, 229 and the 239, and only between .40 S&W and .357 Sig. There are custom (non-Sig) conversion kits to 9mm for these same guns. The Sig barrels (40 to 357 and vice versa) are drop-in conversions. The P220 barrels are fitted, so caliber conversion is not easily done, nor are there parts/kits out there for this. One last thought - the P250 is a neat gun, but it isn't all that cheap to change configurations - granted, marginally cheaper than buying two guns, and, as you pointed out, since the FC module is the receiver there is no hassle with obtaining conversion kits. Check with your dealer for current pricing. Good luck with whatever you decide. Adios, Pizza Bob
  6. What you might see come out of this effort on ANJRPC's efforts is true exemptions. IIRC, the basis of this bill is that the original intent was to create meaningful exemptions from the bill's mandates so that it would have minimal impact on legitimate gunowners. The challenge is that the legislature and the NJSP have failed in that regard. To actually apply for and be granted an exemption, theoretically, would take longer than if you bought one gun, waited 30 days and bought the other. It will be interesting to see where this bill goes. The best thing we can do is to make sure that we vote those people out of office that saddled us with this draconian POS to begin with. Especially Madden. JMHO. Adios, PIzza Bob
  7. That's really weird. It almost looks like it was Photoshopped. The hole is so concentric that it looks man-made. Also, there is no mention of it in the text of the story, just the photo. Are we being bamboozled, and if so, to what end? Adios, Pizza Bob
  8. These bills may have some traction. OGAM was forced through and Corzine rubber stamped it. No systems in place for monitoring, no instructions to FFL's - it was a hurry-up piece of feel-good legislation for the libtards. The streamlining bill probably has a better chance. This may be the end of P2P's. Christie is looking for anyway to save money. The P2P's are a redundant system that pre-dates the digital age. It can be gotten rid of with zero impact (always had zero impact on crime anyway), and save money and administrative time. I'll be anxious to see the actual wording and intent of these bills. Adios, Pizza Bob
  9. Just busting your stones, figured it was a typo.
  10. Sig 250 Elite???? Did I miss the memo?
  11. OK, I'm impressed. WOW!
  12. Interesting that Tasco would stipulate the above. The difference between quality RF and CF scopes is usually where the parallax is set. CF scopes with non-adjustable parallax are usually set at 50 to 100 yards, while RF scopes are set at 25 yards. I've always operated by two principles - You get what you pay for; and: Buy quality and only cry once. JMHO Adios, Pizza Bob
  13. They don't call it the .40 Short & Wimpy for nothing
  14. Not a Taurus aficionado, but I assume yours is built on the small frame - same as the 85. If that's the case, Hogue makes grips for it... (Picture from Hogue's website) I have a similar pair on an I-frame S&W and they are very nice. Good luck. Adios, Pizza Bob
  15. RE: S&W 638... Better than I do. The recoil is easily manageable - and I've become somewhat recoil shy in my dotage. For defensive purposes, I use Speer short barrel, 135 gr Gold Dot HP's. It is far more pleasant to shoot than my Ruger LCP. Adios, Pizza Bob
  16. If you fired one of those heat-seeking bullets while on Guam, I bet the recoil would be enough to tip over the island :mrgreen: Politicians....need I say more
  17. Paul: I wasn't looking to get into a pi$$ing contest - I just simply pointed out that the way the NJ law is written, it could be interpreted to mean just about any bullet, depending on how vindictive the DA decides to be. Just like most NJ firearms laws, there is an awfully large gray area in this prohibition. While the letter you hold certainly lends validity to your position, it has been said over and over again that when you want an interpretation of any law, a LEO is the last person you want to rely on. The letter states that the rounds specified are not hollowpoints - it does not address the crux of the matter as to what, under the law, constitutes a "dum-dum". In contemporary parlance, dum-dum is defined as any expanding bullet. Given the state we live in, I don't think I am being overly paranoid. It won't stop me from using them in my defensive firearms, but it should give one pause for thought. Adios, Pizza Bob
  18. You may get a little better response if you widen the scope to just "snubbies". I have two .357's, but neither are snubbies, so in the spirit of my first statement here are my "just" snubbies... S&W 638 / .38 Spl +P And: Charter Arms (original) Bulldog Pug in .44 S&W Spl. If this circumvents your intent, I apologize and a moderator may feel free to delete this post. Adios, Pizza Bob
  19. Classic P-series Sig's (DA/SA) have four integral safties. They are: 1) Firing pin safety block 2) Hammer intercept notch 3) Disconnector 4) Decocker When the military was considering a new sidearm for SOCOM, one of the specifications called for an external safety (some of the tactical tupperware manufacturers added one so they could be considered) - the P220 was the only gun allowed to take an exception to that specification. Keep in mind that the first D/A pull will be about 10# - 11# - beyond the capability of most young children. Even with that, and regardless of whether what you end up with has an external safety or not (which probably could be manipulated by a young child), your HD gun should be locked-up in a quick access container of some kind. If I didn't already have a P239, I'd jump on that one with both feet - you will never find another - in that condition - for that price. For the person that disliked .40 S&W, a drop-in .357 Sig barrel is available for about $150. HTH Adios, Pizza Bob
  20. Short answer, by law, it's not. The only thing asked on the STS-033 is your employer's name address & telephone and your occupation. There is no requirement for a letter of reference. This is something added by your PD - just as the reference letters from your two listed references are also not required by law. In the course of your PD's background check, they may call your references or your employer, but letters are not stipulated anywhere. Doubt that any legal challenge would meet with any success because the local PD's are given latitude as to how they conduct their background check. I don't mind letters to my listed references (actually in my municipality there is just a form that I can take to my references and have them fill it out, and then I turn them in with my other paperwork), but a firearms check with your employer is a violation of privacy that may have an affect on how you are treated on the job - don't forget this is a very "blue" state and your employer knowing you own (or wish to own) firearms may not be a good thing. Good luck. Adios, Pizza Bob
  21. Not to be an instigator or anything, but there is a P210-6 for sale on SigForum right now.
  22. For myself, a S&W 310, or a 4" 610 if one presents itself at a good price. But it would be nice to find a job first. My GF is currently sitting on 2 P2P's right now. She is a total newbie, so one of those will go to a .22, probably a revolver - a 63 or 17 possibly. If I could find an SP101 in .22 that would be the nutz, because I think the other P2P will go for an SP101 in .327 Magnum for her. I have a friend with one in .327 that I think I can get him to part with and she'll get an opportunity to try it out within the next couple weeks. Adios, Pizza Bob
  23. Just so you're aware, the gun show at the Phila Armory, originally scheduled for this weekend (5/22 & 23) has been cancelled. May 28 & 29 - Bristol, PA / Kings Caterers. This is an Appalachian Promotions show. I've been to this one twice and even though it is a small show (250 tables) I really liked it. The size seemed to distill out the junk - small but good. For our more northern brethren - run across 22/78 and there is another small show in Wind Gap, PA at the Wind Gap Social Hall. I've never been to this one, but I know a lot of people on this board really favor the Eagle Arms shows and that is who is promoting this one. Probably smaller than their Allentown show (Rodeway Inn) - but remember, bigger isn't always better. June 5 & 6 - You get a two-fer. Two shows in Allentown that weekend. A large show at the PA Expo Center @ 501 Cetronia Rd and a smaller show at the Rodeway Inn. The larger show is trying to re-establish itself and is struggling somewhat. It is an Appalachian Promotions show. The one at the Rodeway Inn is Eagle Arms and this is the one people, on this board, seem to like. Too crowded for my taste and if it was the only show I probably wouldn't attend, but having two in close proximity makes it worthwhile to journey up to (for me) Allentown, PA. June 11, 12 & 13 - The big one - Valley Forge, enough said. The Harrisburg Gun Show is also that weekend (Sat & Sun only) for those that really want to travel. Harrisburg is a MAACS show, which is the same outfit that had the gunshow in Oaks, PA last week (5/15 & 16). Think that I'll probably do the Bristol show (fairly close and easy to get to) and the Allentown shows, as well as Valley Forge. These things would be a lot more fun if I had money. Enjoy. Adios, Pizza Bob

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.