Skip to content
View in the app

A better way to browse. Learn more.

New Jersey Gun Forums

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

Pizza Bob

Members
  • Joined

  • Last visited

Everything posted by Pizza Bob

  1. These are an acquired taste. They will seem loud, but they filter out all the damaging effects. This is probably about the best price that you'll find, but go to their website to learn about the science behind them. They are light and unobtrusive. You can wear them over your hat. There is clearance for eyeglass temples. You can hear range commands. For long gun shooters, they allow a proper cheek weld. No batteries to go dead. You can wear them all day in comfort. I have used them indoors and out for over five years and they're great. Have converted several other friends. http://www.amazon.com/SensGard-SG-31-Hearing-Protection-Device/dp/B001IMHSP4?ie=UTF8&keywords=sensgard%20nrr%2031%20hearing%20protectors&qid=1465329435&ref_=sr_1_2&sr=8-2 Adios, Pizza Bob
  2. My gun was a gun before your gun
  3. Any?? Adios, Pizza Bob
  4. Those are both fixed-sight K-frames. The 1905 being the M&P - the Victory was a revolver made for lend/lease to Britain during WWII - the precursor to the model 10. If you find a Victory and decide that is the way you want to go, make sure that it is chambered for .38 S&W Special NOT .38 S&W - two entirely different cartridges and not interchangeable - the Victorys were made in both. The .38 S&W is the equivalent to the British cartridge the .38/200. If you are OK with a fixed sight gun, my opinion would be to go for the model 10 HB (Heavy Barrel) which is 4". The regular model 10's came with a pencil barrel (tapering and thin) in 4" or 5". You will find model 10's in varying configurations from $250 - $450. Thousands out there as this was the preeminent police revolver and there are a lot of ex-LE guns out there - many with lots of exterior wear, but mechanically very little wear - carried a lot, shot a little. Adios, Pizza Bob
  5. The dash number after the model number indicates an engineering change. For instance on model 29's (N-frame .44 Mag) the last pinned & recessed model was a 29-2. When they stopped pinning the barrels and machining the rebates in the cylinder it became the 29-3. Finding revolvers is tough - especially if you are looking for bargains like those indicated above. Deals like those are more about being in the right place at the right time than anything else. Realistically you may find a model 15 in the $400 - $600 range. A model 14 in the $500 - $650. A model 19 from about $550 - $700. Their SS counterparts about the same. The philosophy of S&W collectors is that you never pay too much, you just buy too soon. Good hunting! Adios, Pizza Bob
  6. The model 14 is also called the K-38 Target Masterpiece - this is pre-model number nomenclature. It was used for Bullseye Competition (2700) when it was contested using revolvers, It was generally available in 6" and 8 3/8" barrels. If you desire a 2" or 4" barrel it would be the model 15, which was called the Combat Masterpiece. Those were both chambered for .38 Special. Model 15 The model 19 is the magnum equivalent and it was called the Combat Magnum and available in 2 1/2", 4" and 6". Visual differences between the .38's and the .357's were that the .357's had a shrouded ejector rod and a slightly longer cylinder. All of the above are built on the medium K-frame and have adjustable sights. Model 19 There are stainless equivalents for some of the above. The 15 equates to the 67. The 19 equates to the 66. There is no equivalent in stainless to the 14. The 586/686 are .357 Mag L-frame guns. The L-frame is slightly larger than the K-frame, but uses the same size grips. The 586 is the blued version and the 686 is the stainless. Model 586 BTW, both the K & L frame grip frames came in a round-butt and a square-butt version. Which a specific gun has is dependent on year of manufacture, barrel length and whether the moon was full that night - OK, just kidding about that last one, but there is no tried and true formula on determining what a particular gun comes with - the closer to the present day, the higher the likelihood it will be a round-butt. Round-butt give you greater flexibility in grip choice. Square-Butt / Round-Butt The above barely scratches the surface, and with S&W there is always an exception. Adios, Pizza Bob
  7. I read this article this morning... http://www.msn.com/en-us/news/world/welcome-to-the-murder-capital-of-the-world/ar-BBtGbf7?li=BBnb7Kz ...and it made me wonder what the gun laws were like in Brazil. Here's what I found... https://en.wikipedia.org/wiki/Gun_politics_in_Brazil I see an awful lot of parallels, admittedly in the extreme, but is that where we are headed? I found it interesting that no new gun permits are being issued because the judges say the applicants can't show a justifiable need and there is adequate police protection - and this is for purchase permits. Really scary. As an aside - considering the violence and the zika virus, who, in their right mind, would attend the Olympics there. I think I'd pass even if I were an athlete - the IOC had their heads up their a$$es when they made this choice - they may as well have chosen Fallujah. Adios, Pizza Bob
  8. For Information Yours - Yoda???
  9. Pizza Bob replied to Jah's topic in Handguns
    For rear sights, the higher the number, the taller the sight. For front sights, the higher the number, the shorter the sight. This can be confusing to remember. The easiest way to think of it is, numbers up, groups up; numbers down, groups down. This is true for both front and rear sights. Each number change on the rear sight will affect POI 2" per 25 yds. Each number change on the front sight will affect POI 1" per 25 yds. Keep in mind bullet weight affects POI - if the sights were regulated with 147 gr bullets it will shoot below POA with 115 gr bullets. Make sure that you let someone else shoot it just to confirm your low/left POI before you start changing things around. Adios, Pizza Bob
  10. Pizza Bob replied to KyleKap19's topic in Handguns
    HE - When the NJSP went to Sigs (after the S&W debacle), they originally went to P228's - are new issues and replacements now P229's?
  11. Back home now, and as promised a picture of my three digit serial numbered, model 71 Deluxe... I was cleaning out my parent's home this weekend, preparing it for sale. I was collecting old family photos, when I ran across this one... That is a picture of a decidedly more svelte me (over 30 years ago) shooting the Model 71 at a running deer target at a Harrisburg Hunters and Anglers Field Day event. The shirt was one for CP Bullets, which is what everyone in SE PA and into NJ used for IPSC at the time. The gun barely visible on my hip is my S&W Model 28 that was converted to .44 Special with an original S&W Model 24 barrel. SuRrEaLNJ - did you get any ammo with your grandfather's gun? Adios, Pizza Bob
  12. Congratulations!! You now have the finest lever-action Winchester ever manufactured. This was the only gun ever chambered in .348 Winchester and, actually, the only American firearm ever chambered in a .34 caliber cartridge. These were based on an improved (better steel, etc) Model 1886 action. They were manufactured from 1935 to 1958 and were reintroduced in the late 80's by Browning, with that version made by Mirokou (sp?) in Japan. I understand that the Japanese reproduction is currently in Winchester's catalog. The supply of unmolested Model 71's was reduced over the years as it was a favorite of Alaskan guides for wildcatting to .401 Alaskan. There was a long tang and a short tang version. The long tang version was made through appx 1938. Yours is a short tang version. Yours is also the "Deluxe" or "Special" version that included checkering on the forearm and wrist. It also came with a receiver-mounted peep sight (Williams, I believe). The standard guns were smooth stocked and had a regular notched rear leaf sight. The early Deluxe guns came with a bolt-mounted peep sight with a removable aperture, which essentially turned the sight into a ghost ring. The sling swivels and sling were also part of the deluxe version. The original factory loadings were a 180 gr, a 200 gr. and a 250 gr. bullet. As popularity dwindled the light and heavy bullet loading went away and only the 200 gr loading remained. As for handloading, Hornady makes a 200 gr bullet and IIRC, a 250 gr bullet was introduced in the 90's by one of the specialty manufacturers - not sure if that is still available. Components and loaded ammo got a boost with the reintroduction in the late 80's, but it still isn't easy to find and when you do, you will pay handsomely. All of this is off the top of my head. I know this because I, too, have a Model 71 Deluxe that was given to me by my father. Mine is a long tang version made in the first year of production and as such has a three-digit serial number. I am trying to get on the road and I'll try and post a picture of mine when I get back on Monday. There is a lot of info on Model 71's on the web - enjoy exploring about yours - it is one fine gun. Adios, Pizza Bob
  13. There's another assumption you got wrong.
  14. The Toronto Star (also known as the Toronto Red Star) under the corporate banner of Vertical Scope is buy a large number of gun forums. Not putting this forth as a conspiracy theory, at this point it looks like they are only in it for the money. Buy a forum, upgrade it and monetize the heck out of it. Of interest to us specifically, is the forum at New Jersey Hunter. Just thought I'd let you know in case we have any members here who also belong to that forum. The known list consists of: ACR Forum Defensive Carry National Gun Forum The AK Forum Sniper Forums Marlin Owners Forum Handguns and Ammunition Forums 6.8 Forums XD Talk Walther Forums Prepper Forums New Jersey Hunter Trap Shooters Taurus Armed Colt Forum FN Forum Florida Concealed Carry Forum M&P Forum M-14 Forum H&K Pro Be careful out there. Adios, Pizza Bob
  15. Mrs. Peel, via the National Review, has just handed us an actually viable method of correcting the concealed carry conundrum in this state. For years we have been swimming upstream. We seem to have failed to realize that this is a BLUE state and that we are vastly outnumbered by liberal mouth breathers who have no desire to be educated about guns and the constitution and the fact that it applies to ALL the states. We will never be able to move off the dime against those odds, whether it be judicially or legislatively (on the state level). OTOH, who controls the federal legislature? REPUBLICANS! If we concentrated our efforts on bringing this article, and the recent district judge's ruling in D.C. (yes, I know it probably won't stand on appeal once it reaches the first activist judge's court room, but it stands now), maybe we can, as the article succinctly puts it: "...some crucial mechanisms might start to crank slowly into place . . ." Don't waste time contacting our representatives and senators, that's just more of the same and meets Einstein's definition of insanity - we need to contact as many pro-2A legislators, from any state, as possible and call their attention to this article and the draconian laws in NJ. This could actually be the light at the end of the tunnel......or, that might just be a train. What could it hurt? Adios, Pizza Bob
  16. Shongum on 5/7 - S&W 627-4 PC .38 Super Tomorrow - Somerset IDPA - S&W 625-8 PC .45 ACP Adios, Pizza Bob
  17. Pizza Bob replied to SgtToadette's topic in Handguns
    http://www.njgunforums.com/forum/index.php/topic/81461-brugger-thomet-tp9/ Try to keep up.
  18. This has to be from "The Onion", right?
  19. Not sure how this affects FSS's operation - one would assume that they thoroughly vetted their business plan with a good firearms lawyer, but n4p226r is correct - the article is linked below. This took place while Scalia was on the court - just imagine what the court will be like with another liberal, activist justice. https://www.nraila.org/articles/20141107/supreme-court-grants-batfe-broad-leeway-on-straw-purchase-rules-in-abramski-v-united-states Adios, Pizza Bob
  20. That was just too far out there to ignore. I e-mailed the author of that drivel that was supposed to pass as journalism... Mr. Pinto: Your article “Cops seize AR-15, ‘military’ grade bullets in Paterson, cops say" was probably the worst piece of “Yellow Journalism” that I’ve had the displeasure of reading in a long time. Was the article intentionally slanted to inflame the sensibilities of the general population that knows no better, or were you simply too lazy to do any research on background material? Nowhere in your article is it reported that this rifle was part of a cache of firearms that was stolen in June of last year. There were 14 firearms stolen from a home where they were secured behind several locked doors and stored in gun safes. To report that would have lead people to realize why the gun was seized – it had nothing to do with the configuration which is 100% legal to own. Furthermore, it is not defined as an “assault weapon”, but I guess to include that piece of information would have degraded some of your inflammatory rhetoric. Nor would it be considered a “high power” rifle. In the actual scheme of rifle calibers, it is rather low-powered. But congratulations, rather than actually undertaking “journalism” you chose to just regurgitate the police press release and further the disinformation stream that the MSM disseminates to the public with their own brand of spin on the topic. Adios, Pizza Bob
  21. I think this is the place that n4p226r is referring to... https://firearmssupport.com/storage/gunsitters/ Have some friends that used them quite successfully. I believe that he will need P2P's to retrieve the handguns, but he should be able to do it under an exemption from OGAM. Adios, Pizza Bob
  22. http://cz-usa.com/product/cz-527-carbine-223-rem/ 5.87 lbs.

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.