Everything posted by Pizza Bob
-
Rcbs or hornady or forster ?????
Most definitely - best single stage press out there.
-
Shipping a Rifle Barrel via USPS Priority Mail - Any Issues?
I think that's it pretty funny, and indicative of forum SOP, that the OP's original question, asked in the title of the thread, could have just been answered "no" and yet this post is the 24th in the thread. LOL. Adios, Pizza Bob
-
Rcbs or hornady or forster ?????
Most single stage presses don't have adjustable depth primer seating - I'd look for an individual priming tool, that includes that feature, to accomplish that task. Since I've been out of the game for years I'm not sure such a tool exists, but I'm sure others will chime in. As for the bullet seating dies with micrometer adjustments, worthwhile only if you intend to load different bullets and you want to be able to repeat your depth adjustments. Adios, Pizza Bob
-
Would You Sell One Gun To Buy Another?
Occasionally. These are the few examples that I remember: Remington 700 BDL .30-06 sold to purchase a Cooper LVT in .17 HMR Remington 700VS .223 sold to purchase a CZ527 Royal .223 Remington 1903-A3 .30-06 sold to purchase a S&W 325 PD I don't tend to sell much - more of a hoarder. I still have several guns in my safe that have yet to be shot and that have been there for years. Adios, Pizza Bob
-
Considering a new "different" ccw
I knew that.....I couldn't afford a new one anyway.
- Considering a new "different" ccw
-
CJ USPSA Classifier Match - January 10th 2016
Better men than I.....You do realize that Sunday's high is going to be 21 degrees. I'm with you down to freezing, but lower than that? Not so much.
-
NJ Arrest for dropping friend off on way home from Range!!!
Again?!??!
-
Buying out of state hand gun
Any interstate transaction has to go through an FFL. Long arm - FFL in either seller's or buyer's state. Handgun - FFL in buyer's state.
-
IDPA & USPSA Area Matches
Bump to top
-
IDPA & USPSA Area Matches
I have put together a chart showing when 11 clubs in NJ & PA hold their action pistol competitions. I have only included weekend matches - there are some clubs/ranges that hold weeknight competitions but they are not included on my chart. I really miss the NEPAIDPA website. Adios, Pizza Bob Area IDPA & USPSA Matches (Revised 02/20/2017) Somerset County Fish & Game Protective Assc. (SCFGPA) – Bridgewater, NJ. http://www.scfgpa.org/ Phillipsburg Pistol Club (PPC) – Phillipsburg, NJ. https://phillipsburgpistolclub.com/ Blue Ridge Cherry Valley Rod & Gun Club (BRCV) – Scotia, PA http://brcv-rodgun.org/ Lower Providence Rod & Gun Club (LPRGC) – Audubon, PA http://lprgc.org/ Shongum Sportsmen’s Association (SSA) – Oxford, NJ http://www.shongum.org/ Central Jersey Rifle & Pistol Club (CJRPC) – Jackson, NJ http://www.cjrpc.org/ Ontelaunee Rod & Gun Club (ORGC) – New Tripoli, PA http://ontelaunee.org/ Guthsville Rod & Gun Club (GRGC) – Orefield, PA http://guthsvillerodandgunclub.org/ Old Bridge Rifle & Pistol Club (OBRPC) – Old Bridge, NJ http://www.obrpc.org/default.aspx?AspxAutoDetectCookieSupport=1 South Jersey Shooting Club (SJSC) – Winslow Township, NJ http://sjerseyshootingclub.com/ Quinton Sportsmen’s Club (QSC) – Salem, NJ https://quintonsportsmensclub.com/ A = IDPA / B = USPSA First Saturday of the Month: 4B / 5B / 2A First Sunday of the Month: 8A Second Saturday of the Month: 10A / 11B Second Sunday of the Month: 3A / 6B / 9A Third Saturday of the Month: 11A Third Sunday of the Month: 1A / 7A Fourth Saturday of the Month: 4A Fourth Sunday of the Month: 7B / 9B In months where there are five weekends some clubs may hold special events – like a BUG match or two-gun. These usually just get communicated by word-of-mouth.
- Some Cartridges Don't Fit In Moon Clips
-
Some Cartridges Don't Fit In Moon Clips
Moon Clips 101 If you simply want to use the moon clips at the range, Ranch Products will probably work well with most brass. If you plan to compete, you need moon clips that hold your cartridges the most rigidly. Ranch Products has a website, but that just garners you their phone number. You will have to call and speak with a real human being to order. They may be willing to send you a sample or two along with their price list. Competition is a whole different ball game. To load an 8-shot .38 caliber revolver quickly there are three factors: 1) Length of the cartridge. 2) Bullet type. 3) Moon clip fit to the cartridge. Most people that shoot 627/327 competitively will use either .38 Long Colt or .38 Short Colt to decrease overall cartridge length. For the fastest possible loading, round nose bullets should be used and the charge holes chamfered. On rimmed revolver rounds the groove ahead of the rim is not dimensionally specified by SAAMI, so they can vary quite a bit. So in order to get the best case to moon clip fit you will have to settle on one brand of brass and find the moon clips that fit that brand the best. There are different thicknesses of clips and just because Brand A's .025" thick clip works, doesn't mean that Brand X's .025" clip will work as well. It is often a trial and error process to get the optimum combination of brass and clip. Premium moon clips are pricey. Expect to pay $6 to $7 a piece for them. The absolute best moon clips on the market are Hearthco. These clips are EDM cut and Dave Hearth can usually recommend the best combination of headstamp and clip. TK Custom also make good moon clips. He designates his clips as TK/Hearthco - that simply means that the clip was designed by Hearthco - these are NOT the same clips as you would get directly from Hearthco. TK clips are stamped, not cut. Revolver Supply (aka Wheelgun Supply) makes numerous thicknesses - also in a stamped clip.Most other clips may be branded differently, but are probably made by one of the four makers mentioned above. You need to buy the proper tool(s) to load and unload the clips. For the 8-shot clips, there is no better tool than the BMT. It both loads and unloads the clips with a twist of the wrist. Again, pricey, but worth every penny. I've used the term pricey more than once - but consider that these items are one time purchases. Doubtful that you'll ever wear-out a BMT and if you use the proper tool(s), your clips will last until someone steps on them. The above is the advanced course on moon clips. For those of you that have 6-shot revolvers chambered in .45 ACP, just use Ranch products - whether for competition or just plinking. Those short, fat round nose cartridges, in a moon clip, practically loads themselves into the cylinder. HTH. Adios, Pizza Bob
-
VA AG's CCW Reciprocity Cancellation Overturned
Word to the wise - this is not yet a done deal. It has to make its way through the legislature and be signed by the governor by 2/1. From the article linked in the OP... There’s no word on whether the legislation will be signed by the February 1st deadline imposed by the Attorney General’s original order or if Virginians will still lose reciprocity with those other states until it is signed. Adios, Pizza Bob
- BILL A800 CCW RULES CHANGE
-
Recourse against local PD for denial?
Again, a gray area. If the PD handed you the form(s) and told you to fill them out - that is illegal. However, if the police have the form as an internal document used in the course of their background investigation - not so cut & dried. Just playing devil's advocate. I would think that the courts would be willing to grant quite a bit of leeway to the PD when it comes to firearms background investigations. Most of the SOP of the PD's when it comes to issuance of FPID's/P2P's comes directly from the NJSP manual that the NJ2AS was unsuccessful in obtaining several years ago. Adios, Pizza Bob
-
Hello from New Milford
Yes, but Easton is in PA - 30 round friendly. The MD is a NJ resident so I'm not sure what, if any, accommodation will be made for NJ shooters. This is a question for the MD once the match announcement is actually made. Adios, Pizza Bob
-
Recourse against local PD for denial?
While I predict that you will probably win on appeal, I don't think that the police department will be faulted for their reason for denial. It is a gray area as to whether the physical verification of your address is "added content". The issuing authority is tasked to do a background check on the applicant. AFAIK there are no guidelines as to how thorough that background check is to be or what procedures are to be followed. You'll win because, as you and others have pointed out, there are other ways to verify your address - ways that are accepted by other governmental entities. If my prediction proves correct, and no fault is found with the PD, you will be on the hook for any legal fees incurred. Just the way I see it. Of course, this is NJ, so anything can happen. Adios, Pizza Bob
-
Huskies romping in the snow video in my yard.
Howard - can I hire your wife to come down here and break trail for our GSP? Wrecked my back on Saturday shoveling a path into the back yard and then clearing about a 60 sq ft area for her to use as a doggie latrine. Then I had two days with the snow blower to dig us out (three car garage under the house, below grade, and a parking area for two+ cars above) - thank God for Aleve. Adios, Pizza Bob
-
Dry fire question
Placing the coin on edge is a bit extreme (you'll notice he didn't bring the gun up to firing position). BTW, this only works with a revolver. For a gun with a slide, have a friend load your mag and have them insert a snap cap randomly - any flinch (anticipation of recoil) will be readily apparent when the gun goes click instead of bang. Adios, Pizza Bob
-
Getting started
Reloading 9 mm actually "converts" the case to a straight-walled configuration if you are using carbide dies - which preclude the use of lubrication. Often you will see the reloaded cartridge take on an hour-glass shape once the bullet is seated. I would emphasize current legitimate sources. I have many reloading manuals from the 80's into the 90's in which the max load data was arrived at by dynamic means - examination of the case & primer, sticky extraction, etc. Wasn't until Speer #9 Loading manual that actual pressure transducers were used - and it was later than that before they were used exclusively. In later manuals you will likely find max loads reduced considerably over what was published 10 years prior because now they have actual empirical data upon which to formulate the loads. Adios, Pizza Bob
-
Revolver Smith Recommendation - Trigger and Possible Moon Clip
Be warned, those seeking to "tune" your revolver. Shooting a tuned revolver is akin to owning a Ferrari - they're great fun when they run, but expensive to fix and maintain. Even just tuning with springs may require you to restrict yourself to Federal primers or ammo. Adios, Pizza Bob
-
Gun Belts Suggestions
http://www.thebeltman.net/www/htdocs/index.html
-
Glock 17 w/ threaded barrel legal?
As long as there are no other evil features.
-
Reccomend IWB holster for sig 224?
I have always preferred Milt Sparks Versa Max II's for IWB carry - I own four of them, all for various Sigs. Very comfortable. Buy once, cry once. Adios, Pizza Bob http://www.miltsparks.com/products-versa-max-2.php