Everything posted by Pizza Bob
-
Have you ever wondered
I know somebody who would go nuts over that - he's quite the authority on "smellys"
-
New Ruger Charger/EAA Windicator
Regarding the Charger - of the five enumerated evil features, the Charger has four of them. Regarding the Windicator - buy a used S&W or Ruger My $.02 worth. Adios, Pizza Bob
-
30 Days to Issue: P2P, FID or Both?
2C:58-3 f.Granting of permit or identification card; fee; term; renewal; revocation. The application for the permit to purchase a handgun together with a fee of $2, or the application for the firearms purchaser identification card together with a fee of $5, shall be delivered or forwarded to the licensing authority who shall investigate the same and, unless good cause for the denial thereof appears, shall grant the permit or the identification card, or both, if application has been made therefor, within 30 days from the date of receipt of the application for residents of this State and within 45 days for nonresident applicants. A permit to purchase a handgun shall be valid for a period of 90 days from the date of issuance and may be renewed by the issuing authority for good cause for an additional 90 days. A firearms purchaser identification card shall be valid until such time as the holder becomes subject to any of the disabilities set forth in subsection c. of this section, whereupon the card shall be void and shall be returned within five days by the holder to the superintendent, who shall then advise the licensing authority. Failure of the holder to return the firearms purchaser identification card to the superintendent within the said five days shall be an offense under subsection a. of N.J.S.2C:39-10. Any firearms purchaser identification card may be revoked by the Superior Court of the county wherein the card was issued, after hearing upon notice, upon a finding that the holder thereof no longer qualifies for the issuance of such permit. The county prosecutor of any county, the chief police officer of any municipality or any citizen may apply to such court at any time for the revocation of such card. There shall be no conditions or requirements added to the form or content of the application, or required by the licensing authority for the issuance of a permit or identification card, other than those that are specifically set forth in this chapter.
-
Easier to load handgun
Just rattling your cage. Actually, I have two CA's - a .44 Spl Pug and .44 Spl Target - both from the original CA.
-
Great Solution for IDPA Space Challenged Club
Number 10 post - late again. LOL
-
Easton now three gun only as of march.
Yes, but there is no info on it about 3-gun yet. I believe that it is going to be the third Saturday of the month - but not 100% sure. https://www.efga.net/
-
Great Solution for IDPA Space Challenged Club
@Howard - We had one of those at an indoor IPSC match back in the mid-80's at the Firing Line in Philly. Led each competitor into the dark range. Hit the start signal and have at it. It was fun, as I recall - and everybody went home with the same number of holes they came in with. There was a full range of movement over the course of these stages - lateral as well as forward and back. @HE - Monitored very carefully by the ambient light from the shooters flash light. SO's did carry their own lights and in the event of a catastrophic or unusual malfunction would have turned them on. It wasn't necessary to do so yesterday. This MD does not allow "new" shooters. He wants them vetted first by either being classified in one of the action handgun sports or proof of having taken an NRA safety course. He calls the rules "tight". You are right - tough to monitor and not something to be undertaken by a first-timer. Adios, Pizza Bob
-
Great Solution for IDPA Space Challenged Club
HE: It was surprising that a great many people shot better in the dark stages than the light. I think that can be attributed to several things. We shot all the stages in the light first - meaning we were more familiar with the stage and were able to correct procedural errors made during the light stage, before shooting it dark. Most were slower, but that may not have been necessarily slower shooting, just slower getting into action - eyes adjusting to the darkness, turning on the light, obtaining the proper grip with the light, aligning the light on target - once that was done, the actual shooting speed was pretty consistent with the lighted stage. Not many malfunctions and those that did happen were dealt with pretty quickly. Can't say that the dark caused any of those malfunctions (except one - mine) and most were of the tap/rack variety to clear. I shoot a revolver and strong hand load, and yesterday I was using one that required speed loaders (as opposed to drop & forget moon clips). Manipulating the revolver, speed loader and flashlight is a challenge. Since both the flashlight and revolver are in the left hand, you are loading blind with your right. I inserted the speed loader slightly cocked and before I realized it, released the cartridges - some fell on the floor, some were partially in the cylinder, some were entirely in the cylinder. Dumped the whole mess and reloaded from a new loader. If the stage was light, I would have caught the fact that it wasn't aligned and avoided the mishap. The sight picture obtained by having the target only illuminated with a flashlight is amazing. Very crisp and well-defined BLACK. Made for better accuracy. Tried night sights in the past - not a big fan. Have no idea how weapon-mounted lights work as I'm a gamer and the rules stipulate hand-held lights with no assists (finger loops, lanyards, etc). I use the cigar method - light held between the index and middle finger of the support hand. It was great fun. The MD there has a rather twisted mind, so his stages are always a challenge. I just thought this was a great solution given the constraints of the venue and weather. Adios, Pizza Bob
-
Easier to load handgun
An Uplula makes short work of that. I use my left hand to compress the mag spring (with the loader) anyway - all the right hand is doing is dropping the cartridges in. The OP was worried about racking the slide, not loading the mag.
-
Easier to load handgun
I repeat, there are no left-handed revolvers. LOL.
-
Easier to load handgun
Keep in mind, there are no left-handed revolvers. Cylinder release is on the left side and the cylinder opens to the left, which presents its own set of problems - however, neither of those two drawbacks require strength, just adaptation. Adios, Pizza Bob
-
Great Solution for IDPA Space Challenged Club
I can't take credit for this - a well-known match director in Eastern PA/Western NJ came up with this at a match we had yesterday. The club where the match was held has a small indoor range and an outdoor range. Matches there usually consist of 8-stages. Two indoor and two outdoor with two squads rotating between the two ranges. Then teardown and set-up four more stages, and repeat. Yesterday's weather was not conducive to the outdoor portion of the match, so he set-up two stages, as usual, indoors. One a speed stage and one with movement, walls, doors etc. Again, two squads rotated between the two stages. Then we shot the same two stages again - IN THE DARK. Flashlights being the only source of light and, of course, under IDPA rules, hand-held only. Indoor range, no windows - the darkness was Stygian. Then set-up two more stages, simply modifying the placement and quantity of targets and props, and repeat the light/dark cycle of shooting. Eight stages in the space for two with only one teardown and reset. It was great for comparative purposes and a lot of fun. Much good-natured grousing, especially by those that did not do well on the stage when it was lighted. Surprisingly, a lot of the participants were more accurate, albeit somewhat slower, on the dark stages. A lot of fun and a terrific use of available space. Adios, Pizza Bob
-
How Many Lives Have Guns Saved? Exactly?
https://en.wikipedia.org/wiki/Defensive_gun_use More grist for the mill - take your choice as to which study is more or less valid - they all indicate positive aspects of gun ownership and carry.
-
New/old lever action Marlin
Nice. Is that a Marbles tang mounted rear sight?
-
NJ Handgun Exemption and ATF Form 3310.4
That's relevant to the New Jersey OGAM exemption for consumers, not the federal 3310.4 multiple gun purchase reporting for FFL's.
-
Is there a nics fee for non poc states
There is no fee charged to the FFL in direct contact states or to the POC in POC states. I believe that the NJSP set the fee to FFL's at $15. In non-POC states it is left up to the FFL and usually runs $3 - $5.
-
Obama's Live Town Hall on Guns - CNN Thursday Night
The Town Meeting is on Thursday night, not Monday. Monday is when he is supposed to issue the EO's on "gun safety". What hogwash. I heard Mark Kelly on one of the Sunday morning news shows once again use the long ago discredited 40% figure for non-background checked sales. Antis are of the philosophy that if you tell a lie often enough, it eventually becomes the truth. Unfortunately in the case of the average citizen that is not gun savvy, that is often the case - and they vote. Adios, Pizza Bob
-
Hello from New Milford
Welcome. Just an FYI - EFGA (Easton) will be holding 3-gun matches starting in March.
-
So what are your guys other hobbies or activitys..........
I'm in, but only if you promise we can sing Kumbaya
-
So what are your guys other hobbies or activitys..........
He's a wine connoisseur, and no, I didn't cheat and Google it. LOL
-
Ccw approval? Anyone have a database?
I know someone that has a NJ CCW, that does not have political ties or was a former LEO. HOWEVER, it is not an unrestricted permit. He is the responsible party, where he works, should a burglar alarm go off at his place of employment. He was granted a permit only to respond to that and for on premises. Big deal, huh? Adios, Pizza Bob
-
S&W Shoots Themselves in the Foot
IANAL Not sure of the legal ground S&W is treading in regard to demanding the modified guns be returned. I would think the modifiers would be OK as long as they don't represent the gun as a S&W. Of course there has apparently been a modicum of pre-sale publicity identifying the product as a S&W and you can't unring the bell. S&W absolutely owns their trademarks and are perfectly within their rights to force the modifiers to de-identify the gun and make no reference to the basis of the modified product. I worked for a vehicle manufacturer and one of my roles was to assess liability exposure of modified vehicles. We had a dealer who, against our advice, modified one of our vehicles in a manner that we felt was unsafe or reflected badly on our product or company. We were able to force them to de-identify the vehicle. Pretty much the same scenario here. Adios, Pizza Bob
-
Ccw approval? Anyone have a database?
If there is, we'll never see it: NJAC 13:54-1.15, which states: Any background investigation conducted by the chief of police, the Superintendent or the county prosecutor, of any applicant for a permit, firearms identification card license, or registration, in accordance with the requirements of this chapter, is not a public record and shall not be disclosed to any person not authorized by law or this chapter to have access to such investigation, including the applicant. Any application for a permit, firearms identification card, or license, and any document reflecting the issuance or denial of such permit, firearms identification card, or license, and any permit, firearms identification card, license, certification, certificate, form of register, or registration statement, maintained by any State or municipal governmental agency, is not a public record and shall not be disclosed to any person not authorized by law or this chapter to have access to such documentation, including the applicant, except on the request of persons acting in their governmental capacities for purposes of the administration of justice. Adios, Pizza Bob
-
EFGA - Special events range?
The special events ranges are those beyond the inner gate, up the road. Used for IDPA matches and various training.
-
Just used my 2nd P2P - Ruger GP100
Unless you intend to compete with it, 1 or 2 speed loaders will suffice. My take on speed loaders: HKS and 5 Star - fine for general range use. Requires two motions to load cartridges - insert/twist. Relies on gravity to chamber the rounds, so the muzzle must be pointing down. BTW - 5-Star release knob rotates the opposite direction from the HKS loaders Safariland Comp I & II - Better for carry applications where concealability and speed are a concern. Just requires firm insertion to release the cartridges - no separate twist motion. Release button bears against the extractor star to release. Still relies on gravity to chamber the rounds. The Comp I has no top knob and must be grasped by the sides. The Comp II has a top knob making it easier to remove the loader from the carry pouch. Safariland Comp III and Jet Loader - Competition style speed loaders. Single motion (insertion) to release rounds. Loader is spring-loaded and pushes the rounds into the chamber - does not rely on gravity. Large top knob for easy grasp and removal from pouch (not suitable for CC). Dade & SpeedBeez (Centerfire) - both of these have a coil spring around the circumference of the body of the loader, that retains the rounds in the loader. The top knob pushes the cartridge rims past the spring into the chambers. Prone to losing cartridges if dropped - not real positive retention. Variant SL - I've never seen these used, but from what I've heard these were excellent. Unfortunately, it appears the the lone importer for these is no longer bringing them into the country. The loader you choose may be dependent on application (comp v. carry v. range) or availability of a particular loader for a particular cartridge/firearm combination, so optimum applications may not always be achievable. As an alternative, companies like TKCustom can machine the revolver cylinder to accept moon clips without losing the ability to still use speed loaders or load rounds singly. Hope this has helped. Adios, Pizza Bob