Everything posted by Pizza Bob
-
Arizona Tragedy
Surprised that I didn't see a thread about this. I assume you know of what I'm speaking, so I won't reiterate. I read in one article that the little girl and her family were from New Jersey. Wondering if anybody on here knows them? Only saw it mentioned in one article. I don't know what that "instructor" was thinking. Seems it was a case of suicide by stupidity, but that poor little girl will be traumatized for life because of his stupidity. One thing that some articles failed to mention (maybe in publications with an agenda) was that she was successfully shooting the Uzi in semi auto mode. What made the instructor think it was OK to switch it to full-auto, we'll never know. Purely stupid. My thoughts are with all those involved. It never should have happened. Adios, Pizza Bob
-
Ruger GP 100 sight question
I wouldn't be too sure. I assume that you are talking about Ruger's set-up that allows you to easily interchange front sight blades. I'm no machinist, but, it would require removal of the current sight blade. Fill the slot with weld and then custom cut the non-standard dovetail for the Ruger sight, as well coming up with the "guts" that allow interchangeability - -some kind of spring and plunger set-up. I would wager that it would be more cost effective to sell your older GP100, put some cash with the money you make (probably far less than the cost of converting) and then buying a new (or used) Ruger with the sight set-up you desire. Now if somebody comes up with a conversion kit - like Weigand has for S&W L-frames, then it's a different story. Good luck in your quest. Adios, Pizza Bob
-
Citizenship
Congratulations Igor! What a country. LOL. Adios, Pizza Bob
-
Suggestions for stump grinding near Hopewell?
Jamie, let me check with my neighbor. He just had a bunch of tree work done. I'll PM you when I have the 411.
-
Ruger GP 100 sight question
Anything can be done - the question you want to ask is: Is it cost effective?
-
Mahwah fid process for a buddy
Just on the off chance that this may happen to someone reading this, you need to be aware that the permit cannot be used until seven days from the date of application have elapsed. Adios, Pizza Bob
-
358 Norma Magnum bullets
Looks like $90 is the low price. Heed Old Schools advice if you intend to shoot that rifle.
-
Help with a law.
Nothing to see here. Move along.
-
358 Norma Magnum bullets
Do you want bullets or loaded ammunition?
-
Help with a law.
Meeting the laws of both states is a Federal statute, so null & void in regard to a BB gun since it is not considered a firearm under federal law.
-
Informing Employees
That makes it a "plus" or "+" And it's the cylinder that holds 7 rounds. If you have 7 rounds in the barrel, you have a big problem. I hope that you are taking this in the spirit intended - just kind of poking fun. However, on a more serious sidenote, your unfamiliarity with the nomenclature leads me to believe you may be as unfamiliar with the gun itself - I know that may be a stretch, but when it comes to using a defensive handgun, one can never be too familiar. The 686 is a fine firearm. Adios, Pizza Bob
-
Informing Employees
No, there is no obligation to inform your employees. It may be judicious to do so, but there is no obligation. You are making yourself responsible for your employees well-being. Make sure that you are proficient with that revolver. BTW - it is .357 Magnum or .38 Special, unless there is some new caliber of which I am unaware. Adios, Pizza Bob
-
Hollow points
See Post #15
-
Caliber of Your Home Self Defense Handgun
.45 ACP
-
Hollow points
Enough already. You have over-analyzed this to death, much to the detriment of those that believe anything they read on the Internet. Possession in the home is exempted. As Paul pointed out there are no statutes making it illegal to use hollow points - only to possess them outside of the exempted areas. ad infinitum Adios, Pizza Bob
-
Any matches this Saturday 8-23-14?
Check out Lower Providence Rod & Gun Club (LPRGC). They have an IDPA match scheduled. They are less than a mile from where the Oaks gun show is held. Nice facility and good matches. Adios, Pizza Bob
-
Hollow points
Maybe they were in the gun he brandished.
-
Hollow points
The judge in the Aitken case used a literal interpretation of the law - something I warned about in a post that pre-dated the Aitken case by some measure. Not sure if the ruling in the Aitken case sets a precedent. Prior to that case the NJSP sought an opinion from the Association of Firearm and Toolmark Examiners (AFTE) as to whether Hornady Critical Defense, Federal EFMJ and Corbon/Glasr PowR Ball should be considered hollowpoints. They answered in the negative - but since the Aitken ruling, who knows? Adios, Pizza Bob
-
Moon Clips and the .45 ACP Revolver
@Alec - i'd give-up your hero worship if I could shoot like you. I know it isn't confirmed yet, but congrats on your latest bump. Adios, Pizza Bob
-
Current mag cap law? cliffs notes please
OK - I'll pile on. @mipafox - Don't need to have the gun, possession of a mag exceeding 15 rounds is all that's needed. Pump guns are affected if the magazine used fits a semi-auto also. Remington 7600 comes to mind - they made one in .223 that would accept AR mags. It's never simple. Adios, Pizza Bob
-
Magazine interchangeability question
Later MK I's were built on the MK II frame (A100) and hence will accept MK II mags
-
Weak side accuracy
While it is good to practice at the longer distance, you should be aware that no IDPA CoF shall include support hand only shots of longer than 7 yards, or strong hand only shots of greater than 15 yards. Adios, Pizza Bob
-
Magazine interchangeability question
Depends on the frame. There are some MK I's that have the A100 frame and will accept MK II mags - otherwise no. IIRC it is a fitment problem due to the button used to depress the follower for loading. Adios, Pizza Bob
-
Ruger GP100 38 Special
Nice gun for SSR division in IDPA. I don't like to shoot sub-caliber ammunition in a gun (I.e. .38 in .357 or .44 Spl in .44 Mag). Personal preference and I hate to clean the gunk out of the chamber after shooting the shorter ammo. Adios, Pizza Bob
-
Work on a S&W Revolver
Doing what you specify will leave you with gun that only you may want - not necessarily a bad thing, but forget any thoughts of resale. 3" smiths are desirable - as long as they are K-frames. A 3" N-frame is nice if it comes from the factory that way and the caliber starts with "4". You'd have a poor man's model 27 with a half inch shorter barrel and the rollmarks off-center. Cut, recrown and probably the best alternative for a new front sight would be a Weigand front site base that will then accept DX/Classic type user replaceable blades (that's one on my 586 in the picture, but that was because the blade was integral with the base - not because of barrel shortening). Not an inexpensive proposition. Plus you lose sight radius and shift the balance point rearward, not forward where it helps with recoil. You may want to peruse this thread... http://smith-wessonforum.com/s-w-revolvers-1961-1980/388661-28-2-pricing-craze-seen-first-hand.html Adios, Pizza Bob