Everything posted by Pizza Bob
-
Mental Health Course of Action
I stand corrected. Who knew? What a bunch of BS. Because his parents thought he was sad when he was a kid, he now faces a $3K bill so that he can legally buy a gun. Wow, just wow.
-
What did you take to the range most recently?
Hey, I thought once you got your bump you were going to give wheelguns a try.
-
Mental Health Course of Action
An expungment is to clear your record of an arrest and/or conviction. In the case of the FPID or P2P it would be for a conviction. You can't "expunge" a commitment to a mental health facility or the fact that you were treated at one time. You can, as TC suggests, be examined and get a clean bill of health, which will satisfy most entities involved with the FPID/P2P process. Adios, Pizza Bob
-
Gun show this weekend 7/19 and 7/20
It's close by so I may go Saturday (IDPA match on Sunday). It's been a while. Decent show, not exceptional. Good ammo guy close to the front door. Chip (Top Hat) of USANA set-up back in the corner, Ed's from Tamaqua (good selection of guns & mags) and the usual other suspects. These recollections are from a couple years ago, so I don't know if they still hold true today. Maybe see you there - I'll most likely be wearing a real-tree camo hat with an orange S&W logo (big surprise). Adios, Pizza Bob
-
Mental health background payment
You seem to be confusing two separate elements of the application process. The on-line electronic check is the non-criminal background check, formerly form SBI-212A. The mental health check is still a manual process initiated by the submission of form SP-066, which you should have signed in the presence of the intake LEO. The on-line check is $20, the mental health check is done at no charge. Did you furnish your PD with your confirmation number for the on-line check? You may be able to call the NJSP with that number and find out your status. Maybe your local PD is blowing smoke up your a$$. EDIT: The clerk may mean the mental health check (which has nothing to do with the on-line check). Mental health checks are still done manually, and if you supplied more than one address (i.e. you haven't been at your current address for 10 years) they need to search in that county also. Adios, Pizza Bob
-
Jersey City requires Notarized reference letter
Cite please.
-
Jersey City requires Notarized reference letter
As was stated previously, they can request anything of the reference but they are not the ones being investigated and are under no obligation to respond. Here's a thought. If the applicant responds on the STS-033, in good faith, with the names and contact info of two references, but the reference does not respond, is that grounds for disqualification of the applicant? I believe that any letter or other contact that goes beyond a general character reference is outside the law. I have yet to see a reference letter that doesn't, in some way reference firearms. The NJAC - which is supposed to explain how the statutes are to be applied specifically says... Any background investigation conducted by the chief of police, the Superintendent or the county prosecutor, of any applicant for a permit, firearms identification card license, or registration, in accordance with the requirements of this chapter, is not a public record and shall not be disclosed to any person not authorized by law or this chapter to have access to such investigation, including the applicant. Any application for a permit, firearms identification card, or license, and any document reflecting the issuance or denial of such permit, firearms identification card, or license, and any permit, firearms identification card, license, certification, certificate, form of register, or registration statement, maintained by any State or municipal governmental agency, is not a public record and shall not be disclosed to any person not authorized by law or this chapter to have access to such documentation, including the applicant, except on the request of persons acting in their governmental capacities for purposes of the administration of justice. Actually I think the whole idea of the applicant providing references is ridiculous on its face - who is going to provide a reference that is going to give them a negative response? Adios, Pizza Bob
-
Jersey City requires Notarized reference letter
Here is the article about the court's finding with regard to Jersey City... http://www.ammoland.com/2014/04/jersey-citys-extra-gun-forms-offensive-to-new-jersey-law/#axzz37AZu7KiZ To really throw a monkey wrench in the works, there is no place in the statutes that says anything about reference letters, let alone having them notarized and including a DL number. Yes you have to provide the names and contact information for two references on the STS-033 (application form), but beyond that it is incumbent on the PD to do the background check. I'd find an actual transcript of the court decision and turn that in with only the state mandated forms (STS-033 / SP-066 - signed in the presence of the investigating LEO / and the SBI-212 - now in electronic format - provide the PD with your confirmation number). Hard to believe that in the face of the recent court decision they are still pulling this crap. Up to you how hard you want to push it, but a mention of Nappen's name - if they give you any static when you go to submit the forms - may go a long way toward the PD's compliance - but you better be ready to follow through. When you have an asshat like Fulop as your leader, they may think they are above the law. Good luck. Adios, Pizza Bob
-
Help with "sorting" a firearm for a friend...
I helped Irish Pete's Wife "sort" a 1911, since she is just a wee lass also. Went with slim grips and short trigger. Maybe PM her and see if you can put your friend together with her and she can try one that is already modified before she decides if it will work on her gun. Sandy (IPW) also heads up a club for women shooters. Good luck. Adios, Pizza Bob
-
Do bullpup's pistol grips count as one of the two allowed things on S-A's?
I think you are splitting hairs and I'd hate to be a defense lawyer trying to sell that to a judge and/or jury. The pistol grip is on a plane decidedly below the action and therefore counts as one evil feature. Others may disagree, but I wouldn't stake my future on semantic games. JMHO / IANAL. Adios, Pizza Bob
-
Is this a good deal on 9mm ammo?
Did you read the comments about the MBI stuff? I'd be very concerned.
-
Rebluing a revolver?
I know this is blasphemy, but as much as I love a deeply blued, highly polished S&W, once you start talking re-bluing, all bets are off. It's not like you can't tell it has been re-done, so there is value lost regardless of what finish goes back on it, so why not something more functional, while still good looking? I have always liked the look of Robar's NP3 finish, and that is what i would go with. I would only resort to this if the original finish was in really bad shape. What you describe simply adds character to the gun - not a reason to refinish. Adios, Pizza Bob
-
bring out the snubbies!
I shot with them for the first time last weekend. I think they make pointing a little more natural and there is a heck of a lot more to hang onto. They are rather slim and thus don't compromise the concealability of the gun. I like them. They look like they should be on Batman's gun.
-
bring out the snubbies!
I posted early in this thread, but since then I have added one and changed the grips on another, so here goes again... Top to bottom: Charter Arms Bulldog Pug .44 Spl / S&W model 638 Airweight with Ergo Delta grips, .38 Special / S&W model 325 PD - Scandium frame / Titanium cylinder, Pachmayr Compac grips, .45 ACP/AR Adios, Pizza Bob
-
Shortening Reach to Trigger on Revolver
If as you describe, you desire to use the pad of your fingertip rather than the first joint, then you want to lengthen the distance to the trigger, not shorten it. That can be accomplished by using grips that cover the backstrap. Adios, Pizza Bob
-
Jegs 69pc screwdriver set, $19.99 shipped via Ebay
Do they come in some sort of case?
-
Ring Height for 40mm Scope?
Frank is right. I was confusing the optical aberration of parallax, which is whether the image falls ahead of, on or behind an interior lens after passing through the objective lens, with bullet trajectory vs. line of sight. Sorry. Otherwise, the dimensions are correct as is the desire to have the centerlines as close as practical. Adios, Pizza Bob
-
Ring Height for 40mm Scope?
Are there low rings offered? I always like to get the centerline of the scope as close to the centerline of the bore as possible to lessen parallax. If your top rail extends, in the same plane, out over the barrel, even with the lowest rings listed (medium - .280") the objective end of the scope will be .500" above that rail. If you have BUIS on the gun, you may need to consider clearance between the ocular lens/housing and the rear sight. On my set-up below, I needed to clear both the front & rear BUIS, which is what really dictated mounted scope height. Not too critical as the cheek piece is adjustable. Adios, Pizza Bob
-
Ring Height for 40mm Scope?
A couple questions: Does you flat top rail extend from the receiver to over the barrel in the same plane? Different ring manufacturers measure their height differently. Looking at the picture below, are the dimensions you state dimension A or dimension B? What is the outside diameter of the objective bell Adios, Pizza Bob
-
Hearing Protection
I don't like muffs and I don't like plugs. What I have been using for years now are Zem Sensgard hearing protectors. I use them indoors and out - primarily with handguns, but they are great with rifles also, especially since they don't interfere with cheek-weld. I participate in both IDPA and USPA and usually shoot four matches a month. I am exposed to a lot of shooting during a match for periods of 4 hours or more, where the hearing protection may never be removed. These are extremely comfortable in all environments. I have found that after being used to muffs or plugs, that simply block sound, when first wearing these you may feel that they are not very effective, simply because you can hear what is going on around you. With shooting they attenuate the damaging sound waves. I use the ones with the 31 NRR (yes, that's 31!) rating. No batteries, nothing in the ear, very little external pressure and inexpensive (check amazon). Here is their website - I encourage you to view the videos in the gallery section. https://greg-post.squarespace.com/ Adios, Pizza Bob
-
Langhorne Rod & Gun Club
Escaping to PA, huh? I have a friend that is closing on a house with a Doylestown address on 7/28. Good luck with yours. I'd just stick with EFGA, you're only about an hour away. Adios, Pizza Bob
-
Langhorne Rod & Gun Club
carl: I think there is a waiting list. Plus, I don't know what your fancy is, but this club used to be very black-gun friendly and then there was an old-guard coup - so not so much any more. Still a nice club from what I've heard and read. To where are you intending to move? Adios, Pizza Bob
-
STI Trojan is killing me with feed jams
Did you ever think that this may be part of the same problem? IIRC, part of the magazine fix that you implemented was shortening the spring. Maybe now that they have some age on them there is not enough pressure on the round to put it in a "nose-up" orientation. Even if some of the mags are unaltered, the 9mm round has a tapered case and the nose-down orientation this causes often leads to problems such as yours. I repeat: Send it back to STI. Adios, Pizza Bob
-
STI Trojan is killing me with feed jams
Howard, in the amount of time you have been having these problems, and the amount of money spent on magazines, you could have either A) Purchased another one; or, B) Had it back and forth to the factory several times over. I would have sent it back to STI months ago - they have a fairly quick turn-around and their fixes tend to work. My STI 9mm has run flawlessly from day one. I use Wilson 500 mags and Federal AE 124 gr RN. Send it back. Adios, Pizza Bob
-
Just picked this up today....
It used to be the Beretta Cougar. Beretta transferred manufacture and marketing to Stoeger - a subsidiary and the guns are now made in Turkey on Beretta tooling.