Skip to content
View in the app

A better way to browse. Learn more.

New Jersey Gun Forums

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

Pizza Bob

Members
  • Joined

  • Last visited

Everything posted by Pizza Bob

  1. Again, I repeat, Fusion will pretty much give you any sight you want, including their version of a low-mount Bomar.
  2. Chris: I don't shoot steel, but I shoot both SSR and ESR divisions in IDPA. There are far better solutions than chopping up a nice model 28 that is becoming more valuable with each passing day. With the money you would spend to have the modifications you list, you would be well on your way to the purchase of a more "task suitable" S&W revolver. I would suggest the 686 SSR. Yes it is an L-frame, but it has a tapered ejector rod housing rather than the full underlug you dislike. It is suitable for SSR division (hence the gun's name) out of the box and a quick trip to TK Custom to machine the cylinder, could make it a dual purpose IDPA gun, suitable for SSR with speedloaders and mild .38 Spl loads, or in ESR division using moon clips and warm .357 mag loads. And now that TK is onced again a full custom shop, he could undertake things like a trigger job, chamfering the charge holes and any sight arrangement you wish (FO front sight is my front sight of choice - LPA or a Weigand blade for the rear). Just a suggestion, but I hate to see a no-longer-made 28 cut up. And the custom work on the SSR can be done as time and funds allow. Adios, Pizza Bob
  3. Bomar sights has been out of business for some time now. There are any number of copies of their adjustable sights on the market, but you don't specify what you are looking for - fixed or adjustable. Fusion offers various sights, including a "Bomar style", and since they built the gun, wouldn't it be easiest to purchase from them and have them do the installation? Adios, Pizza Bob
  4. Just a word of caution - if you use a wooden dowel to drive the stuck bullet out of the barrel, you stand the chance of it splitting and wedging the bullet in the barrel even tighter. You should use a brass rod, as close to bore diameter as possible.
  5. Main differences between the 625JM and the 625PC: The JM has a ribbed (for your pleasure) trigger, the PC has a smooth trigger. The JM has a full underlug, the PC has an ejector rod housing. The JM has a standard length cylinder, the PC has a short cylinder. The JM uses ECM (Electro-Chemical Machining) rifling, the PC has broach cut rifling. If you are Jerry and shoot 30K rounds per month, you probably have a callous on you trigger finger that makes the ribbed trigger a non-issue. If you are wuss (like me) you'll prefer the non-blister inducing smooth trigger. The full underlug helps mitigate recoil but adds momentum when transitioning between targets. The PC transitions faster because of less weight. Supposedly (I don't think I have ever seen empirical evidence), the short cylinder enhances accuracy because of the shorter jump to the forcing cone. Some people (I'm not one of them) claim that an ECM barrel leads more. I think there are too many other variables with cast bullets to lay the blame for leading solely on the type of rifling. Broach cut rifling is old school and takes longer to do than ECM. Usually it is more a case of what's available at a reasonable price than which you actually prefer. I have seen JM's listed at $1200 - which is ridiculous. The 625's are some of S&W's most popular revolvers. Good luck with whatever you decide. Adios, Pizza Bob
  6. Moon Clips & the .45 ACP Revolver I have read, in many forums, how people love a .45 ACP revolver, but hate having to deal with moon clips. I find that most of these complaints originate with new owners or casual shooters, who try to load/unload the clips manually, which generally results in loss of blood and bent clips (only a slight exaggeration). All they need to do is invest in the right clips and tools to enhance their shooting experience to the point that, I’d wager, their .45 ACP revolver becomes their favorite range toy. You have spent a considerable sum on the revolver, don’t scrimp when it comes to purchasing accessories that can only enhance your experience with your new gun. First let’s deal with the clips. The .45 ACP revolver, being the most common of the pistol-round chambered revolvers, is probably the easiest for which to find clips. However, caveat emptor, because they are common you will often find clips of unknown origin on venues like eBay, Gun Broker and the like. These can vary considerably in thickness, so my advice is to stick with known manufacturers. Here are a few… Ranch Products http://www.ranchproducts.com/ This website will only net you a phone number. You have to call them on the phone and talk to a real human being to place your order. I use Ranch Products clips for my five revolvers chambered in .45 ACP, and have never had a problem (this includes USPSA and IDPA competition, which can be the acid test for any product used with a firearm). TK Custom http://www.tkcustom.com/ This is now a full custom shop website with the emphasis on revolvers and moon clips. Tom (the owner) can machine a cylinder on what is normally a non-moon clip gun and convert it for use both with and without moon clips. I have a model 25-13, which is chambered from the factory for .45 Colt, that Tom machined so that I can now shoot .45 ACP in clips or .45 Colt in clips, speed loaders or individually. The modification adds real versatility to any revolver. Revolver Supply Co. http://www.revolversupply.com/ The website for all things moon clips. George (the owner) manufactures an entire line of moon clips and is very receptive to customer input. He makes both blued and plated clips. All of the above make moon clips for other models of revolvers and various calibers. This monograph is limiting itself to the discussion of those guns chambered in .45 ACP. Look upon the other calibers as the “Advanced Course” in “moon-clipology” as there are some unique problems that may crop up with them. The .45 ACP revolvers are the easiest and most cost effective guns. Now for the object of the most complaints – the loading and unloading of said clips. There are many tools on the market to accomplish these functions, I am going to recommend but three. For loading… The DeLuxe Moon Clip Tool http://www.mooncliptool.com/ There are other websites that sell similar looking tools, but as I understand it this was the original and I feel people should be rewarded for their innovative designs. This tool bills itself as both a load and unload tool. It does a stellar job at loading clips, but there are better tools for unloading. The unloading loops on the end of this tool will do in a pinch, or if your range bag is packed to the point you aren’t able to fit in one more tool, but see below for my suggestion. For unloading… Moon clip stripper tool http://www.brownells.com/shooting-accessories/speedloaders-accessories/moonclip-accessories/moon-clip-stripper-prod6727.aspx The above link is to Brownells’ website and shows one of the most effective tools for unloading your moon clips. The shank is long enough to hold all six empties that are stripped from the clip, so the unloading goes very quickly. This is a very simple tool and for those of you that are handy (I’m not) they can be easily made from a section of copper pipe or the grip area of an old golf club shaft. Simply notch the end. For both loading and unloading… The BMT tool http://www.bmtequipped.com/products.php BMT stands for “Better Mousetrap” and believe me this is the ultimate tool for both loading and unloading of your moon clips. It is a bit pricey, and it is caliber specific, but it works. Check out the video on the website as it shows how it works far better than I can explain it. I think the BMT tool is a bit of overkill for the 6-shot .45 ACP clips – for those I prefer the first two tools mentioned. I do own a BMT tool for an 8-shot revolver and think the BMT tool is the only way to go for those. Using the above tools will make your moon clip revolver shooting experience far more enjoyable and will result in less personal injuries and few, if any, bent clips. Invariably, in any discussion thread involving moon clips the polymer “Rimz” clips will enter the discussion. http://www.ezmoonclip.com/ Their claim to fame is that they are easy to load and unload without tools. If you are a casual shooter and only limber-up your moon clip gun on occasion, these may be fine for you. Because they are made of a thicker material, fit to the particular gun is more critical and they manufacture many different Rimz models to fit the various models of .45 ACP revolvers, whereas the metal clips, pretty much, work across the board – “one size fits all”. The polymer clips are not as rigid as the metal ones, nor do they hold the rounds as securely. Lastly, they are more expensive than the metal clips. The decision whether these will work best for you, is solely yours. I prefer the metal clips since their low cost allows me to buy 50 to 100 clips (almost a lifetime supply, even for an active/competitive shooter) for a nominal amount. I can do all my actual loading and unloading of the clips at home, in front of the TV (if you are going to be mindless, you may as well be productive) and then take them to the range. I have made a rack – simply a base with 9 dowels glued in place – that will hold 27 loaded moon clips (162 rounds of .45 ACP), that fits nicely in my range bag. When I go to a match, there is no scurrying around trying to reload mags or clips between stages, I just pull-out my pre-loaded moon clips. I think that moon clips are the greatest invention since sliced bread. Among competitive revolver shooters they are de rigueur. As I cautioned before, moon clip revolvers in calibers other than .45 ACP may not be as simple a proposition. I went through four brands of moon clips before I found the ones that worked satisfactorily for me, with an 8-shot .38 Super. Unfortunately, the ones that worked best were $7 each – which entails quite an investment when you want enough with which to shoot an entire match. You don’t have those kinds of problems with the .45 ACP guns. A fat, short cartridge with a heavy round nose bullet up front, practically loads itself into your gun. All opinions expressed above are those of the author – Your Mileage May Vary. Adios, Pizza Bob
  7. Not really sure how I feel about the 325TR and here's why: If you want a big bore revolver to carry, the 325PD (no longer made) is the better option. Both the TR and the PD have a Scandium frame, but the cylinder of the TR is stainless steel PVD coated black. The cylinder of the PD is titanium and the PD was offered in 4" and 2.75" barrel lengths. The TR, just 4". So a 2.75" PD is the better carry gun. The TR has a removable rail - that may make it more useful as a HD gun, but what purpose is served by a lightweight HD gun? Recreation? Again, if I am going to play gun games (and I do), I want a heavier gun to mitigate recoil, not a lighter one that makes quick follow-ups problematic. This is a gun that serves no one purpose well and serves many poorly - almost the definition of compromise. They are a neat looking gun and they may be fun to shoot - but extended range sessions or a full USPSA or IDPA match is going to wear on you because of the weight. The best purpose would be as a carry gun - the few extra inches and ounces are bearable, but it would grate on me knowing that there is a better alternative. My 325PD... All that being said - It is a S&W, and it is a big bore, and it does use moon clips - how bad could it be? Don't let the ramblings of an old fart put you off a pretty cool gun. Adios, Pizza Bob
  8. I didn't post that to scare you off the idea - just to let you know that you should give some consideration to other clubs running matches that service the same area. Here is where to register for the Somerset match... http://www.somersetidpa.com/matches/ If you just want to spectate, no need to register, but make sure you have eyes & ears. Adios, Pizza Bob
  9. The holster is fine, but the light would have to come off the gun for IDPA. Not 100% certain, but probably the same for USPSA. Unfair advantage in that the extra weight on the front of the gun mitigates recoil. There are low/no light stages in IDPA, but any lights must be hand held. Adios, Pizza Bob PS: Vlad / Jim: Great match yesterday. Vlad, I appreciate your concern - I just look like I'm about to expire (actually one more stage and I might have. LOL).
  10. There are a lot of IDPA shooters in the northern part of the state. There are also several matches already within their reach - but I'm sure that something directly within their midst would be a bonus. You just don't want to conflict with already existing matches and dilute their base of shooters. Maybe come out and attend/participate in some IDPA matches to help you decide the direction in which to go. There is a match at Somerset (SCFGPA) this coming Sunday (8/17) and there are still slots open (must pre-register). Good luck in your endeavor. Adios, Pizza Bob
  11. While the classifier remains the same, those time/classification breakdown is outdated. Here is a link to the current rulebook... http://members.idpa.com/Content/Rules/g0hunysc.eoc.pdf Just click on the "Classification" section. Adios, Pizza Bob
  12. Here you go Mike... This and some Loc-Tite and you'll be GTG
  13. Hey, at least they got the Derringer right. Nice to know that two major publications agree.
  14. The old school fix is to take a centerpunch to the bottom of the sight base (the part that goes against the slide). This will raise some metal around the punch crater and tighten the fit in the dovetail.
  15. Stay away from that whacky-weed. No excuses on Sunday morning.
  16. My kids never listened that well - my dog still doesn't. Very funny - and weird.
  17. Red Tailed Hawk, Howard. Nice picture, as always.
  18. As others have said - just come on out and dive right in. Everybody had a "first time" at some point. You'll find that you are among friends, and aside from a little good-natured ribbing, they will be very helpful to the new shooters. If you haven't already, you may want to read this... http://njgunforums.com/forum/index.php/topic/37797-uspsa-idpa-a-synopsis-updated-03232014/ ...it talks about both disciplines. Sunday (8/10) at CJ is USPSA. If you want to give IDPA a try, that will be the following Sunday (8/17) at Somerset (pre-registration required). Either game is great fun, come on out and give them a try - you won't be sorry. Adios, Pizza Bob PS: I'm in BTW
  19. The SBI code is the applicant's unique identifier. Your FPID number is the same as your SBI number.
  20. Your understanding is correct. Do you already have one at your old NJ address? Not sure that it matters as the process is the same for changing an address or applying for a new one. Good luck. Adios, Pizza Bob
  21. 2C:39-6 Exemptions. f.Nothing in subsections b., c. and d. of N.J.S.2C:39-5 shall be construed to prevent (b)Directly to or from any target range, or other authorized place for the purpose of practice, match, target, trap or skeet shooting exhibitions, provided in all cases that during the course of the travel all firearms are carried in the manner specified in subsection g. of this section and the person has complied with all the provisions and requirements of Title 23 of the Revised Statutes and any amendments thereto and all rules and regulations promulgated thereunder; or I pasted the above statute to show that you do not have to be a member of a club and have your name on their roster - it says "any" target range. You are GTG as long as the firearms are legal under NJ law and you go directly to and from the range. Adios, Pizza Bob Welcome BTW
  22. Every time a non-criminal background check (SBI-212A) is performed pursuant to an STS-033 Application for a FPID or P2P's, there is a charge. The SBI-212A is now being done on-line and is now $20 ($18 for the check and a $2 "convenience" fee). Check with your local PD to make sure that they have moved to the electronic format. This may help... http://njgunforums.com/forum/index.php/topic/68599-fpid-p2p-application-process/ Adios, Pizza Bob
  23. I think NY doesn't give you a pass with FOPA, but it serves as an affirmative defense. Don't forget to go to The Kittery Trading Post. Have a good time. Adios, Pizza Bob
  24. Smith & Wesson 329 PD. Full size, major caliber, lightweight (appx 26 ounces). Use it with .44 Specials for HD/SD and magnums in bear country. Meets all your criteria. Adios, Pizza Bob

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.