Everything posted by Pew Pew Plates
-
Lead/Metal Buildup inside barrell
Shooting a a jacketed round through a heavily lead fouled barrel can cause pressure issues depending on how bad it is. Plus then you have to clean the copper out. I'de rather just stick a chore boy down the bore. Its easier on the gun, I dont have to bring 2 kinds of ammo, and at the end of the day I dont need to use a copper solvent.
-
Lead/Metal Buildup inside barrell
Yeah, 150 rounds?! Thats a ton. Leading can be %100 avoided with lead loads, but unfortunatley its all about the ammo. Either the lead in those Prvi loads is way too soft allowing it to scrape off/burn into the bore or the lead is way too hard (more likely) and it is failing to obturate, causing some gas to blow by and again, burn lead into the bore. I reload 148 grain HBWCs and can fire hundreds upon hundreds of rounds and the bore doesnt even have a spec of ANYTHING in it. Its all about hardness to pressure. Its a bummer that it leads like that, Prvi usually has great ammo. Excessive leading can also be from a rough bore but a new GP100 wont have that.
-
Lead/Metal Buildup inside barrell
%100 copper Chore boy wrapped around a .22 jag or .38 jag, tight enough that you need to lightly hammer it down your bore. Will wipe it all out in one pass. Before any of you panic about barrel damage, I can assure you that its still alot easier on the barrel than an oversized copper coated bullet being fired down it with heat and 20k PSI. Just be sure to use an actual chore boy since the rip offs are copper washed steel and not actually copper. Those are no good. Make sure to do this with a dry bore, the more friction the better. Hoppes and a brush will take you hours on hours to do. Hoppes doesnt disolve lead and all it does is help the brush slide OVER the lead, you are better off brushing dry if you really want to use a brush. If you prefer a chemical method of cleaning vs mechanical, use a lead-away cloth. That will actually break down the lead. They are also great for cleaning the front face of the cylinder. Yes, you can actually get that bare clean on a stainless revolver! Just dont use it on a blued gun... because it wont be blued when you are done! I promise that either of these methods will work better than anything You cant get a cylinder face like this with hoppes! Especially not when you are blasting it with 60,000PSI loads.
-
What's Your Feelings on This?
Upon further reading its about alleged violence in the past at their house
-
What's Your Feelings on This?
Sucks that the kid has the name but once he is an adult he can change it. I guess its the parents right to name like that... If you start saying THATS A BAD NAME YOU CANT DO THAT! Where does it stop? And taking the new kid without a court order? Bleh. Its a mess
-
Caliber question
And the .460 S&W magnum can fire .454 casull and .45 long colt. .38 specials bullet is actually .357-.358 but is called .38 because originally it used a heeled bullet like .22lr, and the bullet was the same diameter of the case which was .38". Now it uses modern non heeled bullets so while its still called .38 the bullet isnt .38.... More trivia
-
Caliber question
It gets worse than that too. a 7.62x39mm's bullet is actually larger in diameter than a 7.62x51mm's bullet because the russians measure 7.62 from land to land while we measure it from groove to groove. So 7.62mm for them is .311" and for us its .308". So 7.62 ≠ 7.62 lol. Same with 9x18 mak, their 9mm bullet is .365" and our 9mm bullets are .355. Even more confusion
-
25 "Must Have" Guns in a "Proper" Collection
10mm is less than .41 and a Glock is def not a revolver!
-
25 "Must Have" Guns in a "Proper" Collection
How about a vehicle to fire numbers 10,11,20,21, and 25 off of? lol No collection is complete without the ultimate #25
-
25 "Must Have" Guns in a "Proper" Collection
All im missing is a snubby (no desire to have that in NJ), class III for obvious reasons, and a mouse gun for the same reason as no snubby. Oh, and a .22 pistol. Boooring.
-
Folding Stocks
A folding stock would be legal on a 10/22 if that was the only evil feature but the butler creek stock also has a pistol grip therfore its a no-go
-
Looking for a range with Saturday hours.
I know it isnt terribly close but it isnt terribly far either, somerset county fish and game in Bridgewater is open 8-11 365 days a year. Its private but easy to join and its $45/year with unlimited range use and no extra fees if you do one workday per year. Otherwise its $95 IIRC which is still nothing. Pays for itself very quickly
-
Stepping Back into Time ...
He purchased new armscore cases. They are not reprimed, they are new never fired primed cases although I have heard of at least one person sucessfully using a strike anywhere match head paste to fire. Just read the link he provided
-
Stepping Back into Time ...
No problem
-
Stepping Back into Time ...
Black powder cartridge silhouette. To shoot it with .22, since there is no black powder .22 factory ammo, you must reload.
-
Stepping Back into Time ...
You cant shoot BPCR silhouette with a .22 unless you do what he is doing...
-
Stepping Back into Time ...
- Mw3
We camped alot in WWI We're cheaters!- Stepping Back into Time ...
...Thats hardcore! Awesome!- 1911 disassemble
I have both a SA and a S&W 1911, both without idiot scratches. Instead of putting something on to protect the frame, just put the slide stop straight in. Its super easy on the S&W, requires some finess on the SA, but its better than having to use a protector every time. bleh. If you have to, hold back the plunger with a flat bladed screw driver as you insert the slide stop straight in.- Is a Speedloader/Moonclip with Ammo Considered a Loaded Magazine?
Its really easy. What is a firearm? It is the frame/reciever of a "gun". That is the LEGAL firearm. Is the magazine a firearm? NO. If you have just a barrel sitting on the front seat of your car and a round sitting in the chamber, is it a loaded firearm? NO, a barrel is not the firearm therfore it is not a loaded firearm. If the magazine is in the frame of the firearm, it is a loaded firearm, and it is illegal.- 1911 disassemble
Yeah, you must take care when re-installing the slide stop to avoid the idiot scratch. It only takes one whoops and your gun is marked! Its the easiest to install it by putting it in and sliding it up but thats what gets you the scratch, you have to push it straight in.- How accurate is 1 MOA?
Math is my weakest subject, but wouldnt the difference be the .047" difference at 100 yards, multiplied by 10 for 1000 yards, so you would only be off 0.47"?- Slow Rust Bluing Home Project
If you read the post that you quoted: "After that I welded the slant brake on to make it nj compliant " I know its part of the process but I couldnt stand seeing my gun rusty like that LOL I'de have heart palpitations- Antique Firearms evaluation
OK, The ELG in a circle/crown is a belgian proof mark. Black powder proof from the german 1891 proof law so the gun is post 1893. The EL scroll is a provisional proof. The letter with star is the inspector name but its a backwords P which confuses the hell out of me, especially because theres also a star & AC which would probably mean Woit Nicolas Cominoto proofed it. Still cant figgure out the date. Perhaps a Khyber pass special? You should confirm the date on it because if its post 1898 you are running afoul of federal law with a smooth bore pistol. Post the pics on a dedicated belgian shotgun board (theres a few) and you can get more accurate/definative answers on what you have. Dont waste your time with an appraiser - Mw3