Everything posted by Pew Pew Plates
-
Gun powder possession Law
Fire codes are what you gotta look out for. Its 36 lbs in NJ (I forget at which point you need a wooden box)
-
Cheapest prices on bulk ammo purchase?
Of course it will wear more tecnically, but it will not wear out an extractor at any particularly fast pace. Just because it is steel on steel doesnt mean it will wear out crazy fast....look at steel punches. Hardened tool steel vs mild steel: you can punch 1" holes in 3/8" plate for years every day with the same punch and it doesnt wear out. Steel on steel...but one is much harder.
-
Cheapest prices on bulk ammo purchase?
Internet myth. A really soft coated mild steel case wearing out a high quality piece of very hard/resiliant steel is not going to happen. I have never seen proof of this and if this was true, then there would be many many AKs and such out there with worn extractors. Before you go on saying "yeah but the AK was designed for it" it doesnt matter, steel is steel and the steel "wearing" on the steel doesnt care if it is in one gun or another. Even if it did wear it out, with the money you save by shooting steel case it wouldnt matter if you had to buy a new one every now and then (but that will not be the case)
-
Cheapest prices on bulk ammo purchase?
www.aimsurplus.com $179.50 per thousand if you buy 2k for wolf
-
AWB
NJ already prohibits assault rifles. This is why you cannot own an AK47, M1 carbine, Colt AR-15, etc etc or anything substantially identical to those listed. That is NJs definition of an assault rifle. Now, we all know that a true assault rifle is a select fire rifle that uses an intermediate cartridge, but those are NFA anyways
-
IDPA @ Somerset, Sunday 5/15/11
in!
-
hipoint 4095 or 4595 carbine
You are correct, 23 mags are too short HOWEVER you CAN use 22 mags in the 23 (they will stick out a little)
-
Selling a legal NJ gun to an out of state resident
I know its really just petty semantics here but your comment may be misread. It does not need to be transfered to an FFL, rather, it just needs to be shipped with a copy of your drivers license to an FFL in texas. You gotta be careful with the term transfer, I think some may read it as you having to go to an FFL in NJ and paying a transfer fee to ship it off which is not the case. When you get the faxed copy of the FFL, check it here https://www.atfonline.gov/fflezcheck/ and then keep the copy of the FFL and shipping documents stashed away somewhere. This is NOT required but it is a good idea. If one day the ATF comes knocking and says "hey your gun just killed 20 people" you are going to want proof that it went to a legal destination.
-
So your only allowed to have 1 handgun for the rest of your life
Yes, of course everything breaks but some things are much less likely to break. I agree, if you have to take the lockwork out of a revolver it isnt terribly easy but how often do thing break in there? Either way, I suppose neither of this matters because you dont need additional permits to fix a gun and that is his reason for only one, not end of the world/SHTF. In this case, the versatility of a 686 (or any other .357 revolver) cannot be beat
-
So your only allowed to have 1 handgun for the rest of your life
S&W 686. It will never break or wear out in your lifetime unless you shoot ALOT. You can put light .38 loads in it and its super super accurate for training, great for ladies too. Then you can stoke it with .357 magnum for defense or blowing sh!t up. It really is the ultimate do-everything gun. If you get an auto like a glock 19, it does not fit the target pistol job very well (but is the ultimate for defense/carry)
-
Reputable AKM Smith in North Jersey?!?
The RSA is nearly $100 IIRC. I have one in my PSL and its tits!
-
whats the deal with birdshots?
I know easton doesnt allow it on the rifle range because it really shreds up the plywood target holders.
-
How to fix a hanging up bolt
Its actually not really possible to see if it is doing it, I just assumed that it was the problem, took a stab at it and was right. However, you cannot hurt anything by just knocking that corner down(a little!), so you may as well give it a shot. Remember, go a little, test, go a little more, test. Easier to take off than put back on lol. I got mine on the first try with about 4 strokes of the file so its not alot.
-
Buying handgun FTF from someone with an invalid FID card
I believe you can still transfer guns out if you do not have an FID, so I would treat him as a non-FID holder and leave that field blank. As far as the state is concerned, an invalid FID is no FID. This is of course my speculation, and I am not a lawyer, so...
-
Post Your Tactical Shotgun Pics
at least put an AK-ish front handguard set on it for now!
-
How to fix a hanging up bolt
So, my when I first got my Polish milled, it had a little quirk where if you pulled back the bolt and eased it foward it would hang up on the hammer. It was basically a poor mans bolt hold open, but with a bump it would slam shut. It wasnt terribly annoying when I was using the rifle however whenever I gave it to someone else to check out or fire, they would leave the bolt "open" and it was super annoying. I figgured this would go away after firing. Well, it fires 100% but after a few hundred rounds it continued. So...I set out to stop this annoying "feature". This little quirk is not really uncommon and it is actually a side effect of Kalashnikovs genious design. As the bolt returns foward, it actually forces the hammer down AGAIN to make sure it is 100% caught by the trigger hook(s). unfortunatly, due to american FCGs not being exact copies of the originals, they arent always perfect. This is what I did. The corner where the arrow points to is what is catching the bolt. I simply removed the trigger group, stuck the hammer in a vice, and knocked that corner down a LITTLE with a file. You really just have to break the corner, no further. I threw it back into the rifle and tada! It now will NOT catch no matter how hard I try. Not all hammers have this design with the corners, and I am not sure which is more original in design but for reference, here is the other style. Hope that helps somebody out there!
-
Which 9mm RANGE Handgun $600 or less? (no conceal and no carry)
same. The CZ runs like a lexus, the glock runs like a civic. I think that is better
-
Went exploring PA this weekend while there for family gathering..
so THATS what freedom looks like?!! lol
-
Reputable AKM Smith in North Jersey?!?
I'll take a look if you are in the bridgewater or plainfield area. I have installed 2 tapco G2's (one went into a SAR, also) and 1 RSA trigger group. I'de reccomend chucking away that annoying shepards crook and picking up a retaining plate for 5 bucks before we do it, though http://www.copesdistributing.net/product_info.php?products_id=366 It is available other places too, although this may be the cheapest their shipping is like $10. Maybe you can call them and convince them to drop it into a $0.44 envelope?
-
Inexpensive but reliable .22 pistol for the range.
nono, thats when you reload
-
Inexpensive but reliable .22 pistol for the range.
Yeah but the 686 AFTER the purchase of a .22....is still far more than just the 686, just sayin
-
Looking for a .308 semi-auto
25-30 cents a round using bulk primers/powder (buying 8lbs powder/ 5k primer bricks) and surplus pulled bullets http://www.hi-techammo.com/hitech.zkb?root&GENMENU601D&object-menu6
-
Inexpensive but reliable .22 pistol for the range.
Ah, I understand. Hey, the 686 is sweet. Load yourself up (or buy) some 148 grain hollow base wadcutters. They seriously kick barely more than a .22 and are SUPER accurate and punch perfect holes in the paper...easy to see and score. If that is in your plan you may want to consider skipping the 22 since the 686 with those rounds will be just as awesome of a teaching tool. .22: Pros Cheap accurate low recoil Cons: limited to .22 gets less and less fun dirty! 686: Pros Accurate Low recoil Much more versitile with ammo (.38/.357) ..You want to get it later on anyways Cons: A little more pricey on ammo
-
Inexpensive but reliable .22 pistol for the range.
I am not sure how you arrived at those conclusions. Cost effective is really difficult to measure.. and if anything I would go the other way and say revolvers are more cost effective. They require less cleaning/maintenence and you will shoot less due to lower capacities and longer reloads and probably a desire to shoot single action. They are much cleaner than a semi auto also. For upgrades, not really a difference. Both can take optics if you so desire. There are tons of grips out there for K frame revolvers too. I also dont see any truth to that argument. Revolvers are going to work for SURE with ANY .22 ammo you put in them (even shorts...)
-
Ugh, rimfires
Correct, the piston delays unlocking like the lugs do on the 1911 for example. Most >9x19 pistols are indeed direct blowback, like you mentioned the PPK/makarovs. Also the LCP for a more modern example. Direct blowback is indeed dirtier because the case is coming out into the action much earlier in the firing sequence, thus there is more crap going around. Ever notice the little bit of flash at your ejection port? Yeah, thats because there is still combustion happening while the bore is unsealed by the extracting case. Hence the dirtyness.