Skip to content
View in the app

A better way to browse. Learn more.

New Jersey Gun Forums

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

Pew Pew Plates

NJGF Vendor
  • Joined

  • Last visited

Everything posted by Pew Pew Plates

  1. I agree. The only reason im ranting here is not because I think one is better than the other. It is just because vlad informs people that a basic saiga conversion is the same thing as an arsenal but cheaper.
  2. I understand where you are coming from but what im talking about is that you always compare what you did to an arsenal and say you saved X amount of dollars and got the same thing. But the fact is what do does NOT compare to an arsenal neither in time nor material costs and the end result is not the same. Over your typical conversion, you need $50 more for a new FSB, $50 more for a new gas block, $5-10 more for cleaning rod, $50 more for a brake, plus even more time. Oh yeah, and to groove the barrel dont you have to remove the entire barrel? Do you have an end mill to put in the groove?
  3. well, it is an accessory lug on the gas block. I have pressed stubborn things too, but for some reason pressing off a gas block irks me. the point is, with the cleaning rod it will look like crap without it. Remember, the reason for hypothetically putting it on is for the fair comparison of arsenal vs saiga conversion.
  4. you pressed on a lugged gas block, too? BTW, those front sight bases are a PITA to replace
  5. yeah. saigas are not the cure-all end-all.. I agree with vlad on many points, however it is not always the best route. If you do the conversion with k-var (authentic) furniture, it runs up the cost. Press off the front sight base and press off the gas block and put on a real HG retainer...that takes alot of time and tools. now buy a totally new gas block....and a totally new front sight base....and a muzzle brake. Dont forget the cleaning rod. Congrats, you are now at or likely over the cost of an arsenal and you spent alot of time doing it. If you are doing to compare a converted saiga to a arsenal gun you must look at the whole picture. You cannot say a converted saiga gets you the same thing.
  6. could be a seperated case stuck in there, too. had this happen to a 30-06 1919 barrel. I wouldnt play the guessing game with calibers. make a cerrosafe chamber casting and measure it.
  7. Well, they are using real HG retainers, and they are using higher quality furniture. plus labor. red jacket charges $350 for the pistol grip conversion alone so it could be worse...
  8. KG-12 works just as well as sweets but with no stink. sweets wont trash your barrel if used right, it just smells like it will because of the ammonia. Tony, im sure your beretta has the same streaks. Look at it carefully from an angle.
  9. You need copper solvent after powder solvent to remove those streaks with any firearm shooting jacketed ammo. It is normal. You will not get rust in a stainless barrel (and your barrel is indeed stainless) I reccomend KG-12 and sweets 7.62 for copper removal.
  10. Another +1 on the tech sights. I got the TSR100 and love it. Got the TSR100 version so I could quickly flip between 2 settings and because its slightly lower. It is still fully adjustable, except for elevation you just use the front sight adjustment.
  11. Switching to wood is super easy. Price depends on what wood you get, surplus romy AKM furniture runs about 10 bucks for a set and surplus russian laminate runs upwards of $200. Pick your poisen.
  12. im suprised you got a warning. I'de think that once flagged action would have to have been taken by someone. Nice!
  13. Thats what I was thinking. PAP, MAK-90, the original WASRs...
  14. Its pretty much agreed upon on the interwebs that its just the geometry of the design. While in DA you pull the trigger back a hair and the hammer moves like half way back. Leverage against your favor. Doesnt matter to me, its just a range toy
  15. CMP will be the cheapest. All the ammo i've seen at shows it just CMP ammo marked up. I think its 50-60 cents a round shipped now. I dont think you could find true M2 ball local and if you did expect to pay $1/round
  16. Picked this little gem up a little while ago from Mastadon for $135 out the door. Welded up the front sight to get it zero (shot about a foot high). 32ACP, and this is what it can do offhand at 25 yards! Very little recoil. SA trigger isnt *terrible*, DA is probably 15 pounds. DA/SA with decocker and safety. Really nifty little pistol. Rumor has it Tony has one. I am very happy with mine. They even have a really awesome loaded chamber indicator.
  17. Correct. Pretty much anything goes
  18. guilty but only for target stuff (not blasting/idpa)
  19. case lenghth wont affect seating depth. Try loading a 380 case in your 9mm setup. it will be tough to start the bullet since the flare is set higher for 9x19, but if you seat the bullet it will be same length. your variation is just from movement in the turret and that amounts fine. dont bother trimming pistol. the reason the new stuff is longer is because a fired and unsized case is swollen. If the (acceptable) variation drives you crazy, you can always sort brass by headstamp. It will probably not eliminate your variation but maybe it will make you feel better
  20. It goes both ways. I think I equally as many people saying "screw buying more handguns its a PITA". Those people also will tend to be less vocal because you arent going to discuss what handgun you wont be getting
  21. Wow, thats a bummer. Theres an exception to everything I guess. I'm sure they will make it right. Heres my story from an older thread
  22. S&W even fixed a mess up on my part trying to take something apart that I wasnt supposed to...lol. +1
  23. I dont even consider rem-oil a lubricant. It is so terribly light...

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.