Everything posted by mipafox
-
Is it worth trying to CCW a 4" K-Frame?
What do you mean by "conceal?" Do you mean nobody will notice or nobody can notice? Throw a Hawaiian shirt (no tail, not flowers) over it and call it a day. BTW you shoot near me so you should be stopping by for lunch now and then.
-
Skunk Roadkill in Plaid Shirt
There is a dead skunk in the road near my house with a plaid shirt sorta on him. WTF is that? I'll try to get a pic today but it probably got smeared in the overnight.
-
Once again - HP .22 RF
I don't think there is any other state with laws about hollowpoints.
-
PORK ROLL or TAYLOR HAM!?
Blasphemy! Banish him!
-
Guns found in attic - questions
Awesome!!!
-
.22 ammo and ammo in general rant
Newtown? Reloading supplies were much harder to find (especially primers) in 2008-2009 with the Coming of Obama. Nothing in the world is new.
-
.22 ammo and ammo in general rant
You haven't learned anything, have you? See you complaining all over again in a couple years. Sorry, this is not the first time this has happened. I have little sympathy for people that are so deluded that they think any time they want something, somebody else will give it to them on the spot at a reasonable price.
-
Voting with my feet, sad but happy
You'll get over it.
-
AR Build Questions, Guidelines, and Suggestions
I think Molon over on barfcom has good results with his super-light handloads of 45 grain or so pills (I forget) out of some pretty high twist barrels. So, you never know. The stability charts show us where the sweet spot is, and they show us rounds we probably can't shoot out of a certain barrel, but if you roll your own that's only a rule of thumb unless you push the limits.
-
AR Build Questions, Guidelines, and Suggestions
I'd rather have one than a 1/7. Except, like you said, that they are less common. And that always bothers me. I don't like custom anything in ARs. I prefer the real deal Now, I shoot a lot of tracer, but even those will be fine out of most 1/8 under the conditions I shoot at. Never under 20°F, yikes!
-
AR Build Questions, Guidelines, and Suggestions
No, you said this: 1/8 is the most uncommon barrel twist for 5.56 or .223 on the planet. 1/9 is common, and more accurate for both 55 grain and 62 grain than 1/8. How does that make me talking down to you? I'm trying to help here. I don't know what your problem is, but it aint twist rate. If you said tomorrow the sun was going to rise at 10 AM on a nautical forum and I said that wasn't true you would jump my shit. These are simple facts, not in dispute, I'll put you on ignore because you have some sort of weird thing about me and I don't want you to get aggravated by my responses to you. EDIT: Just to be clear: Both 55 grain and 62 grain are generally more accurate out of a 1/9 than a 1/8 or 1/7 for anybody reading along. I don't want this weird personal dispute to confuse the issue.
-
Once again - HP .22 RF
Don't forget every poor bastard that rents cars in NJ with NJ plates that I rented in PA with the same NJ plates. Sorry, can't find them all.
-
AmmoMan.com
OK, well, if it was him, he confirmed it in his own words in public on the internet.
-
Water
Well, atmospheric pressure is around 32+ feet this time of the year. Matter of fact, that's a pretty reasonable number year round. You are not going to lift water by suction from 45 feet unless you are air lifting (pneumatic conveyance) or have some other stuff going on. But, that is not a matter of how deep your well is, or how deep your drop tube is. It is a matter of the water level in the well vs. the height of your pump intake. You can suck water from a tube down at 100 feet if the water level in your well is at 20 feet and the pump intake is 5 feet above ground surface. The 100 feet doesn't matter, only the 20+5 = 25 feet. Provided you meet Net Positive Suction Head. Which would include friction losses in the drop tube.
-
AmmoMan.com
Is this the guy that sold an SKS as a Vietnam bringback rifle and when the buyer saw import marks he literally laughed at him and told him to "pound sand?" I think it was him but I don't remember. I never saw ammo from him cheaper than elsewhere so I didn't dwell on it.
-
AR Build Questions, Guidelines, and Suggestions
You gathered wrong, see above.
-
Once again - HP .22 RF
OK, thank you, Gentlemen.
-
Once again - HP .22 RF
I brought this up years ago I think, giving it another shot. I read the FAQs (no i didn't read all 10 pages) and I read the law and see no exception or exemption for .22 RF. I was under the impression there was an exception/exemption for this caliber either by law or policy. Anything or no?
-
Dumbest NJ gun law
Goodness gracious. They don't care one bit about the "concealablity" (SIC) of your rifle/stock, and they don't care if it is pinned or not. They don't care if your rifle has a bayonet or not, let alone a bayonet lug. I don't ever think I am going to come to grips with the possibility that it might be that I am older than you are stupid. (not you specifically, just this strange preponderance of ignorance) They banned ARs. All of them. They threw in bayo lugs and collapsible stocks just to make sure you didn't rename your ARs. You cut off your bayo lugs and pinned your collapsible stocks to get around the fact that they wanted ALL ARs banned.
-
Anyone ever break a front sight?
I hate to dirty this up, but it sounds like somebody either boogered with it in a really retarded way or somebody did it on purpose. That doesn't happen by accident. And, no, I've never heard of it happening. But I did have somebody fuck with my sights once, decades ago.
-
Keep your eyes open (not knockout game but related)
I posted my failure today as a contribution for discussion on this topic. "Keeping your head on a swivel" and "situational awareness" mean nothing if you do not posture yourself to prevail before challenges are presented. "knockout game" was mentioned here in passing. Keeping your head on a swivel and being situationally aware is not enough without a plan to respond and taking action. And not just pulling a gun, or a knife or pepper spray. Because you normally can't do that when people are just walking around you. And about to hit you/shoot you/stab you in one second, and they don't have the decency to make that absolutely clear. Action ALWAYS beats reaction when decisive, unless you are facing someone in a stance and waiting to block a punch. Looking over your shoulder is worthless unless you are going to act on what you see before a threat is even evident.
-
Keep your eyes open (not knockout game but related)
I screwed up today. Some dude was walking quickly behind me on a sidewalk crossing in front of parked cars while leaving a storefront. So I kept looking over my shoulder and speeding up. And he matched speed. This dude was within 6 feet of me. So I turned out towards the street between cars. This was over the course of only about 30 feet, but still. This was not a sketchy looking dude. If he was I would have handled it differently and sooner. But I don't like people tightly tailing me, and by the time it seemed like it might be deliberate it might have been too late for me making a simple turn. You don't win by looking over your shoulder when somebody is on you. We all consider looking paranoid or startling people in public with our actions. But, with this guy on my ass, changing direction was much too late. I should have done a 180 and walked towards him so I didn't have my back to him. It would have required 5 seconds and not seemed nearly as sketchy as me peeking over my shoulder, speeding up, and then changing direction. Turned out he wanted to compliment me on my carry.
-
AR Build Questions, Guidelines, and Suggestions
A slower twist would suit both weights better. 1/8 is not necessary for 62 grains. But 1/8 would work. I shoot 55 out of 1/7 most of the time, and it works OK. If I wanted accuracy out of 62 grain (which is dumb) I'd go with 1/9 out of the common twist rates. If I wanted accuracy out of 55 grain I would with of 1/12 out of the common twist rates. But I shoot most out of 1/7 and it's not the end of the world because I only need so much accuracy.
-
How many rounds...
Nice mindset. What country you planning to wage war against?
-
Good cleaning product recommendation
Simple green kicks ass on soap scum and any "grime" (icky stuff containing grease). If it has scale, you may need a residential HCl lime removal product and 15 minutes to half hour of repeated applying and removing, with a light scrub prior to removing. Not a lot of elbow grease, just attention. And gloves, fresh water decon source, eye protection is mandatory, and ventilation. CLR, Super Iron Out, etc. will not remove highly structured scale that has accumulated over a long period of time on some surfaces, and depending on the relative constituents of the hardness. Not all scale is the same. I recently solved a scale problem at a 600 gpm drinking water plant and distribution system for a reservation so I got a bit of a refresher on it. There are probably other things that will work but this is my experience.