Skip to content
View in the app

A better way to browse. Learn more.

New Jersey Gun Forums

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

Parker

Members
  • Joined

  • Last visited

Everything posted by Parker

  1. Every powder manufacturer has their data online and can be found on the 'net. The powder manufacturer ones (i.e. Hodgdon) will give you data for various bullets from different manufacturers. Most bullet manufacturers have their data online and can be found on the 'net as well. Get one "how to" book to explain all the basics as a resource. The two you have listed are good, I'd give the nod to Lyman. Then get a Speer, Nosler or Hornady book. Join some reloading forums as well. They are good resources as well. A few I'd recommend that I use: For various rifle loads I like - http://forums.accuratereloading.com/ http://forum.accurateshooter.com/ http://forums.thecmp.org/ http://forums.handlo..._user.asp?FID=0 (for pistol as well) http://www.longrange...com/forums/f28/ http://www.marlinowners.com/ http://m14forum.com/ For lead loads: http://castboolits.gunloads.com/
  2. This world is a crazy place sometimes. A 22-year-old who allegedly gunned down his parents and his brother at their home was captured by police yesterday after a day-long manhunt. Trey Eric Sesler, an online animation enthusiast and critic from Texas, is believed to have had a high-powered weapon on him and body armour when he was arrested on Tuesday night. The bodies of his parents and brother were discovered around 1pm at their Houston home after police received a call from concerned relatives. Read more: http://www.dailymail...l#ixzz1pluyatjH
  3. I'm going to try for coyote a couple times with the rifle this week before the season closes in N.Y. on the 25th. Haven't had the time to get out and it's just too d*** hot out already.
  4. Parker replied to Wolfy's topic in Rifles
    I'm not a fan of the side push button safety either. Lever-actions are (I should say were) designed to carry safe on the half-cock notch. It's worked fine for more than a century. If need be, you can carry hammer down on an empty chamber until you're in the woods on stand for an extra margin of safety, or utilize the half-cock notch on the hammer which is still perfectly safe. I don't have the hammer-block safety on my Marlin's, and they have served me well. Purists hate it so much, they resort to tactics like this: http://www.beartooth...ch_notes.htm/52 Or this; someone who sells a replacement pin that looks like another screw in the frame: http://www.leverguns.com/articles/taylor/crossbolt_safety.htm
  5. Parker replied to Wolfy's topic in Rifles
    I noticed it has a top-mounted safety. This levergun is an example that some things are just not meant to be, but a safety on a lever-gun is akin to wearing a belt with suspenders.
  6. There has been more than one recall on 700's and their variants. The bigger one involved pre-1982 rifles and the bolt lock integrated with the trigger/safety. (Taking the safety OFF to manipulate the bolt to unchamber a live round I guess unnerved some people.) http://www.firearmsi...Recalls%204.htm
  7. Not the first time this has happened. Remington has deep pockets, which makes them an easy target. In the 90's, while they were still under DuPont, they settled a class action lawsuit over their shotgun barrels, the suit claiming the barrels burst upon use. Those who participated received a disbursement of $17.125 million. (Of course, there were a lot of people who participated for it involved Remington shotguns manufactured between 1960 and 1995!)
  8. This is almost two years old already. To sum it up in writer Dave Petzal's words; "If the original 700 trigger has a fault, it is that it can be fooled with by anyone who has a small screwdriver." Reminton's response: http://www.remington700.tv/ Field & Stream's David Petzal - http://www.fieldands...del-700-trigger
  9. Shotguns are taking on some racy shapes these days. Some info on the EVO and others unveiled at the recent SHOT Show: http://www.shotgunli...-shot-show.html
  10. I had that same Mattel Fanner 50 Shootin Shell revolver as a kid. Those silly shells really worked with stick-em caps.
  11. The .25 Remington and .35 Remington are both rimless cartridges that were chambered in rifles with tubular magazines. Loaded with round nose or flat-nose bullets, they were safe.
  12. I bought a USP45, Variant 1 in 1995. Some fellow had put only 100 rounds through it and decided he preferred his 1911's better. I paid $450 for it. (Compared to a Series 80 SS Government I'd purchased new ten years earlier for the exact same price, I thought the USP was a bargain at the time for some of the features it offered compared to the Colt .) I thought the USP was a beautifully engineered modern pistol and a quality piece. I never once had a problem with mine. When I read this thread it made me regret that I sold it some years ago. If there was one gripe I had with it, I found that for me it was not an instinctive pointer in my hand. Other handguns are, the USP was not.
  13. Citori's have a good reputation for durability. They are simply Japanese-copies of Browning's legendary Superposed. With proper care, they won't start to show wear or exhibit problems until the 40,000-50,000 round mark. Many have been known to go twice that distance. I've seen Miroku's (Citori's) that have seen 100,000 rounds and I shot a Superposed for a summer with a bit more than 100,000 rounds on it. That Superposed, while it practically flopped open, still exhibited a top lever that was right of center. Beretta's are equally as durable, and their trunnions which act like hinge pins only mounted in the sidewalls, are replaceable for wear. (The higher end Beretta target guns also have replaceable shoulders.) Both O/U's are serviceable to the average person and parts like extractors can be easily removed for a good cleaning. The key to keeping an over & under (or any double) working for years is to clean them religiously so the dirt doesn't promote wear. Good O/U's are fitted with very close tolerances. Dirt and grit in wear areas act like a fine abrasive and over time will wear the metal surfaces.
  14. There are some well-heeled folks who appreciate fine craftsmanship, and think nothing of dropping more than $10,000 or more on a custom rifle to not hang on their wall but to travel the world and hunt with as well. Some examples where high-end craftsmanship meets utility - http://kilimanjarori...ilimanjaro.html http://www.granitemo...ma_brochure.pdf Some well-known examples less than $10,000 - http://www.jarrettri...com/rifles.html http://www.mcwhorter.../OurRifles.html http://www.mcmfamily...fles-custom.php
  15. I know the Rossi is a copy of the Winchester 92. Which is an excellent design, but it's not a Winchester. I can't speak to the quality of the Rossi firearm. As for Marlin's jamming, I have used and shot some for decades and have had no such experience. I've shot friends' 1894's and Winchester 94's in the smaller calibers like .357 Mag. & .44 Mag. and never experienced a hangup. My friend shoots his M94 .44 Mag. in 3-gun events and it performs flawlessly. One scribe's opinion: http://www.fieldandstream.com/articles/guns/rifles/2007/02/six-best-lever-action-rifles-and-when-use-them
  16. Thought this might be of interest to some. Pretty basic, but informative. If it's already been posted, Admin. please remove. http://www.rem870.co...emington870.pdf
  17. A 12 ga. White Onyx with 28" bbls. would make both a nice field gun and could suffice for trap or skeet or sporting clays as well.
  18. Decide on a budget first, then go to a club that offers loaners and try a shotgun or two. Then, after you decide what you like, go back home, you might or might not rethink your budget, then come up with some solutions and alternatives. There can be a marked difference between a true "clays" gun and a field gun, but there are a few good models out there that CAN do both. Don't buy any shotgun unless you've felt it in your hands, shouldered it, and decided that it is comfortable for you. Proceed to shooting one next and it will tell you whether what you think fits you properly hits for you properly. In other words, points like it's an extension of your hands and hits effortlessly. Remember, most standard shotguns vary only so much in dimensions, while people, their size and structure, vary considerably.
  19. I realize the post was tongue in cheek and meant as a light-hearted jab. And it fostered a lot of good commentary. Hey, my dad had me reloading shotshells, paper hulls w/ felt waxed fiber nitrocards and cardboard wads (plastic shotcups weren't available yet) when I was around 9 or 10. I still have both eyes and all my digits. It's not as scary as people make it out to be. THIS was a scary centerfire reloading tool to use back in the 70's -
  20. Just remember, it was reloaders (and savvy tinkerers) who weren't satisfied with regular rounds that brought them to "hot rod" then-conventional rounds to something better. Just think: Elmer Kieth would have been satisfied with the .38 Special & .44 Special and never pushed the envelope for a .357 Magnum & .44 Magnum. P.O. Ackley would never have taken every bottle-necked cartridge and put an "Improved" stamp on it and called it his own. Roy Weatherby would have accepted a magnum cartridge's sharp shoulder and rebated rim and never devised his double-radius shoulder for his proprietary cartridges. There are others involved in the mix, but hats off to those who took enjoyment while frowning at risk.
  21. I've always referenced the male bird as a "cockbird." Old-timers will remember the old NJ game code for harvesting pheasants that dictated in certain sections of the state outside of stocked WMA's, only cockbirds or male pheasants were allowed to be taken. (Back when there were wild birds in the state.) It's still that way in areas of PA and NY. New York's DEC Digest references pheasant gender as "cock" and "hen." It is not uncommon in the world of fowl. Peacock distinguishes the male version of the peafowl. Peahen is the female version.
  22. It depends on which one you are looking for. Gunbroker or GunsAmerica might be the best places to look. I don't think Remington catalogs an O/U anymore. They only made a handful of models (32 & 3200, 300, 332, 330, 396.) The latter models listed were loosely based on the original 32. The rest have been Italian imports (Sabatti made the Premier line) and the Russian import called Spartan (Baikal) which Remington hastily discontinued. The Sabatti guns were actually very well made, but I think were imported for just a couple of years (2007-2008.) Bill Hanus Birdguns had a batch and was selling them at ridiculously low prices a couple years ago. The Model 32 & 3200 are the best of the American-made Remington's. The 32 is the better of the two. The Remington 32 design is what was sold by DuPont (who bought the rights from Remington) after the war to a company in Germany called Kreighoff. Hence the famed Kreighoff K32 was born! Kreighoff's today are premier sporting shotguns and some are priced for the likes of Saudi princes. Remington's O/U's - http://www.remington...r-shotguns.aspx 2012 Remington catalog http://www.digitaled...cation/?i=90918
  23. My comment was part facetious. They may be fine for your purposes. They are still soft lead, so who knows what shape characteristics they take on once ignition occurs. Foster slugs are undersized for a 12 ga. as well. Pull a Federal, Remington or Winchester slug from an unfired round, measure them and you'll see they vary in size from manufacturer, but are all smaller than the nominal bore diameter. . The soft hollow base obturates in the bore upon ignition while the fins on the side swage down as it passes through the choke, if there is one. The fins on the side allow it to be fired through full chokes.
  24. Cylinder bore for a 12 ga. is .729". .650 should happily bounce down the bore with no problems.
  25. As a parent or family member, you might want to try Nar-Anon. There should be a chapter that meets by you, they are situated all over N.J. Here's a link of meeting locations. It's a start and they can offer you suggestions for other avenues that are available. http://nar-anon.org/...New_Jersey.html

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.