Skip to content
View in the app

A better way to browse. Learn more.

New Jersey Gun Forums

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

vladtepes

Moderators
  • Joined

  • Last visited

Everything posted by vladtepes

  1. eh.. I guess technically you are correct.. but careful with that..
  2. you have to build gun.. and Saigas I have put together many.. this is one I did for my fiance.. I sold it.. but it was a blast..
  3. you will find more opinions than you can count.. I prefer Saiga.. it is a true Russian gun... and works really well.. I have yet to have a bad experience.. there are OTHER ok variants out there.. WASR IMO is not one of them due to hit or miss quality..
  4. not trying to be difficult or anything.. but you insist they are butterfly swords because of the literal translation of Dao.. but then you go on to tell about Daern Dao but that is not a knife.. for some reason that is a sword.. even though it contains the word Doa as well.. can you understand the confusion there? you insist one is a knife.. because of the word.. but then claim the other is a sword.. with the same word? sounds a little confused.. sounds as if Dao is used in reference to swords as well.. not trying to be difficult just trying to understand.. was not implying one is better than another.. a Kbar has its shortcomings as well.. it is small.. so lacks reach.. I was simply pointing out the shortcomings of the butterfly swords (knives) in that in a short tight area stabbing wide slices (as I have seen with this weapon) seem to be difficult.. of course your home is different than anyone elses... and was simply pointing out that the lack of defined sharp point would seem to greatly reduce its stabbing ability.. do now you have a weapon in a somewhat confined area that can't stab well.. and would be difficult to generate a hard slicing motion.. again.. I was just trying to understand the practical use.. which is also why I was asking about videos.. since I figured maybe it would help me visualize how you were using it.. it is a genuine curiosity about your choice.. not an "I am right and you are wrong" kind of thing.. I know you might have taken it that way because of the "sword / knife" thing.. but as you pointed out.. other Dao ARE actually swords?
  5. nice... that is JUST enough...
  6. reading first line.. I get that the literal translation might be knife.. but there are Dao swords are there now? again maybe there are different methods.. but everything I have seen used fairly large exaggerated motions.. which would IMO be sketchy in a tight hallway.. have any links to videos online of some of the movements you train in..
  7. no.. you will not achieve that smoothness due to the excessive amount of linkage within the fire control group.. but you could probably polish the hell out of it just go a little at a time.. if the internals are as smooth as they can be it will make the most of what you have..
  8. not what I learned.. or had read.. while wikipedia is certainly not the end all of information.. it echoes what I have learned.. http://en.wikipedia....Dao_%28sword%29 I have been involved in knife and stick fighting for approximately 7-8 years.. but with that said we did primarily focus on modern arms so maybe I am mistaken.. but EVERYTHING I have ever read and found online when searching.. refers to them as swords.. not knives.. what is your point of reference? I am certainly no expert in the butterfly sword (knife) but the notion of using such a rounded weapon in the confines of a hallway to me is not good.. in tight spots with knife fighting you go to stabbing and digging.. (crowbaring) (bulldogging) and that isn't going to happen with something that lacks a good deep point..
  9. wow.. I posted mine before reading yours... kind of creepy.. LOLz... you can come shoot mine in the summer..
  10. SBR my AR or Saiga 12.. if the AR then SBR AR + suppressor.. but all that will have to wait till spring.. a small reliable carry gun..
  11. you were not informed I see... it doesn't matter where you live.. the middle east.. China.. NJ.. "flat dark earth" is "in" at the moment.. lol
  12. not sure what you mean there.. but removing a stock to replace it would in some cases.. net a gun that by alteration (removal of the stock) is now less than 26in.. I was just pointing out that it was by alteration OR even just the blanket statement "otherwise" otherwise could essentially cover everything under the sun.. lol
  13. whether by altercation OR otherwise..if such a firearm has an overall length of less than 26inches.. to me sounds a whole lot as no matter what.. if you got a gun that is less than 26in it is technically at that time a sawed off shotgun.. not really arguing I think it is just as absurd as you do but as the law reads..
  14. lol no problem.. but it's funny.. once you did the 223 you probably would hold the 308.. and just think wtf.. this sucks.. and leaving it factory was probably unbearable.. lol
  15. I prefer absolute... I run a fold down rear sight and even with the sight up it does not appear annoying.. but if I want to clear my view a little I can simply fold down the rear..
  16. you have seen it.. it is the one I have.. If you took the feel of a chisel and a meat cleaver.. and merged them.. that is about what it feels like.. it is EXTREMELY solid..
  17. can you also never change the stock on ANY rifle that would net less than 26in? because then you would technically have a "sawed off shotgun" while the stock is being replaced? stock cracks.. oh well throw the gun in the trash.. because you can't fix it? if the stock comes to your house.. and you pin it as soon as it arrives.. I do not see issue.. when I questioned the state police about something similar.. they found it almost comical.. you can work on your own firearms.. you can pin your own stock.. order a collapsible stock and sit it in your safe for the next 5 years.. have police respond to a domestic.. and yeah.. you might be in for bad times if they somehow see it.. but if you get the stock sent to your house.. and pin it.. I fail to see issue.. if you are really concerned.. take the gun completely apart till the stock arrives... while it might technically be constructive possession.. good luck on actually having any kind of charges levied against someone... you are right.. you can not keep an assault weapon in pieces.. but to order a part make it compliant and then attach it.. I really do not see issue.. but that is my opinion.. not legal advice.. if you are worried have it sent to a relatives house and pin it there.. but if that is the case.. you really can't do ANY work on ANY gun that would temporarily render it too short because it would be the same catch..
  18. for what it's worth.. told you so..
  19. some are.. just had a LONG discussion about this.. lol
  20. my Daniels Defense rail was slightly more sturdy... but the MI appears to be plenty sturdy enough considering all I am really using it for is a means to hold my light and index clips for a good grip.. I am rough on my stuff.. and I do not regret the purchase.. and considering the cost.. and yes it is the 2 piece unit..
  21. the pistol grip does not look all that comfortable to me.. no forward assist.. nothing against Mossberg.. but.. I would rather build my own and get EXACTLY what I want..
  22. maybe we have slightly different bullet guides... just shave the front of the Saiga mag where the lip is.. just go slow and test test test.. till it fits.. as long as you don't take off too much you should be good to go..
  23. about 8.5lbs complete with optic.. light.. the whole deal.. unloaded..

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.