Skip to content
View in the app

A better way to browse. Learn more.

New Jersey Gun Forums

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

vladtepes

Moderators
  • Joined

  • Last visited

Everything posted by vladtepes

  1. yes... but I think it has to be cut with something else.. but I am no wood working expert.. just regurgitating what I think I read elsewhere..
  2. vladtepes replied to matt6669's topic in Rifles
    not sure what you are looking for.. or if this is just too generic for you.. but I shoot my dpms 308 with a harris bipod and i make holes in holes at 100.. holds the gun solid.. doesn't come loose.. again not sure it is right for you.. but that is what I use and I am happy with the unit..
  3. even a used 12 for sub 500 over the counter at a sporting goods store in NJ.. is not bad IMO..
  4. is this a "guy" as in someone you know well.. or just a friend of a friend of a friend.. or better yet an actual shop?
  5. http://www.dinzagarms.com/saiga_308/akgt2.html this is part you need...
  6. 308 conversion is different..
  7. he is just following the directions included with the shotgun..
  8. I will explain it simply.. in ANY situation where you are using heavy duty loads the Saiga 12 will RELIABLY put exponentially more ammunition on target compared to any pump gun.. this is why people love the saiga 12.. you don't get it? are you kidding me? what is there not to get?
  9. I will simply agree to disagree.. but implying that a saiga 12 is potentially unreliable because it wont consistently cycle lightweight ammo is somewhat misleading.. the gun is semi-automatic and it takes a decent chunk of gas to cycle the gun... run the gun on heavy 12 gauge ammo.. verify the ports are correct.. and that gun will run all day.. the disappointment comes when individuals think that the gun is magical.. and should out of the box do more than it is intended to do.. if you have reasonable expectations.. the gun will not be a disappointment..
  10. Just looking at wiki as a quick reference.... And they appear to be maybe a lb different in factory form.... A lb is not enough for me to really stress over... When that extra lb gets me more ammo on target faster... Look I am a 500 believer... But most saigas will run heavy ammo without issue.... And in a hd defense situation I would be running some pretty heavy ammo... Ammo heavy enough to cycle the gun without issue...
  11. For arguments sake... Just how heavy is your mossberg.... I bet the weight is less different than u think....
  12. Gun is not heavy enough to hinder it's use.... As far as being ammo sensitive... You are right... In stock form it does not like light ammo... Umm well in a hd situation are you running light ammo? Saiga with heavy buck runs all day long... Right out of box... No problems... Do not need target load on combat shotgun...
  13. it is not for you.. you are from the land of drums.. folding stock.. SBR.. no need to get excited over a pump shotgun..
  14. I do not have any personal experience with that product.. but it at least looks smaller and lighter.. it just seems like a lot of effort and product to hold the gun in an unnatural way while mounting a light... I am not knocking you.. it all coming down to individual user.. and you should get what is most appealing.. but I still question the logic.. having shot with an AFG equipped AK I just didn't end up using it all that much.. the best part about the AFG was that it put my hand in natural position to operate my light.. but once I changed the setup.. no more need for AFG.. here is a good picture of me not using the AFG.. lol at full length out far where it was designed to be used.. I do not find it comfortable on the AK platform.. and then in close I ended up normally being on the mag.. like I said the ONLY time I used it was operating the light.. but the new setup without the trirail works muck easier.. good luck with whatever you go with.. post some pictures of the gun and give a review.. it is nice to hear product reviews.. might want to check with arms and ammo he may have some rail systems in stock for your gun..
  15. the rail on my gun is metal.. (in the new version the flashlight is mounted to the ultimak gas tube.. a gas tube with a welded integrated rail.. the vltor flashlight mount is metal.. the aimpoint red dot is metal.. the ace stock is metal.. that red dot is rock solid.. and will last ON continuously for a year +... it is not some junk.. high end red dots are EXTREMELY reliable.. but expect to pay $400+ I build EVERY gun I own for function.. not look.. my guns are used and abused.. I run them to failure so I know what to expect.. ironically.. the position of the flashlight illuminates the target just fine.. and coincidentally also illuminates the front sight post (did I mention that my red dot setup allows for real time co-witness of my irons.. if my red dot were to fail.. no need to even flinch.. your irons are right there.. already completely visible.. the gun runs.. and it runs good.. not my first or only Saiga... http://njgunforums.com/forum/index.php?/topic/21787-saiga-conversion-information/
  16. my apologies for my last post.. did not mean to offend by further driving your thread off topic...
  17. a little as far as accuracy goes... my use of this gun is run and gun.. this is a COM -200 yard rifle for me.. meaning I am moving.. changing distances.. and shooting.. not a ton of bench shooting.. I noticed no change in accuracy with any setup I have run on this gun.. but as stated.. my use of this rifle is specific.. the rail is made of metal.. the hand guard is made of plastic.. BOTH have seen a LOT of fire... and neither showed any signs of weakening.. as stated.. get a rail if you like.. I did.. but for mounting a flashlight I feel the new setup I run is like 1 million times better faster and lighter.. unfortunately I have no "hard data" because when I made the change I was already committed to doing so.. also.. metal rail hanging on the front of the gun had a tendency to make the gun a little front heavy.. not unbearable.. not a problem.. but just put a tad too much weight up front.. gun feels far more balanced now.. neither hand guard damaged the rifle in any way.. both had perfect fit and finish.. no complaints about either... rail was just overkill.. and overkill is good if there is a use.. but in this situation.. I would say you could accomplish the same utilizing a traditional AK hand guard (to your liking.. ) couple with ultimak gas tube (gas tube with rail section on it) and an offset light mount attached..... and shoot the gun.. it honestly sounds like you were after exactly what I was..
  18. been there done that... in the later version the gun is far smoother to operate.. it is very ergonomic... think about it.. you are adding a rail.. so you can mount a light to the side of it.. and then put another grip on the bottom to get your hand to be in a place of comfort.. allowing use of light.. with second version I have done.. my hand almost falls in the same spot.. minus all that weight and girth of the huge trirail.. version 2.0 Saiga 7.62x39 Ace Internal Block Ace Stock Hogue Pistol Grip Tapco FCG Surefire Magazine (15rd I live in NJ) Ultimak Hand Guard Magpul AFG Viking Tactics G2 Light Mount Surefire G2 Viking Tactics Low Profile Swivel Mount With Quick Release Ultimak Gas Tube Aimpoint H1 same gun.. like version 4.0.. lol Ace Stock Ace Internal Block Dinzag Tapco G2 FCG Hogue Grip Tromix Bolt On Charging Handle Surefire 15 Round Magazine Kvar Lower Handguard CSS Lower Handguard Retainer Ultimak Gas Tube Vltor Quick Release Flashlight Mount Surefire G2 Aimpoint H1
  19. I ran ultimak rail on Saiga and it was solid built like a tank... but truth of the matter is bottom rail is unnecessary and makes gun less user friendly IMO.. what are you using this rail for? because I have Saigas.. and I run optic.. flashlight... etc.. without big clunky rail.. gun is slimmer and faster to maneuver..
  20. well.. look at all that response.. lol you could try your local movie theater.. local gas station.. or maybe even a diner... but the consensus seems to be that Staples is the place to be..
  21. not if you trim it to the VERY EDGE prior to lamination..
  22. I will admit I have had mixed feelings about you at times.. in fact there was a moment in time when I thought you were a complete dick.. I have since revisited that decision and decided you seem to be a pretty cool guy.. cocky? yes... full of yourself? maybe a little.. but at the end of the day.. all things aside.. you really seem pretty cool.. inviting people to shoots and all.. that is good stuff.. as for FA and all that.. I think you are %100 correct.. I have VERY LIMITED FA experience.. and I must say it was surprising how difficult it was to stay on target at first.. definitely does take a lot of getting used to.. loading out the mags lightly in the beginning is probably good advice.. the first mag I ever shot in FA was fully loaded 30 round mag.. and as careful as I was.. the last shots of the mag were really creeping high... well over the target.. so there is definitely a learning curve..
  23. staples? the UPS store? most office supply places do laminating for stuff like that..
  24. nah that car is gone.. I ran that car for years.. in the sweltering heat.. with frozen bottles filled to the brim.. lol never ruptured the disk.. one to a a dash mounted nitrous pressure gauge.. and the other to the system..

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.