Everything posted by vladtepes
-
saiga 7.62x39 sight crooked
plating it in gold..
-
Operation Fast and Furious
[/thread] it portrays the government as crooked and unaccountable.... end of story..
-
Operation Fast and Furious
I think it will make it easier for us to buy guns in Mexico than in NJ... oh wait.. it is probably already like that.. but as far as a serious reply... as far as the impact? law abiding gun owners did nothing wrong.. some of the buyers were prohibited people who should not have even been allowed to purchase.. the government is never accountable for anything.. so don't expect much there.. but you have a situation where the government ALLOWED the WRONG thing to happen... I fail to see how that could reflect poorly onto gun owners..
-
How do you transport guns, mags and ammo to the range?
fair enough... but I would be willing to bet there is a laundry list of additional "facts" in said case where a magazine was considered a gun... I am also willing to place a sizable amount of money on the following.. *any "non prohibited" individual who has in his possession several loaded magazines traveling within the state with a firearm as allowed by law, would not encounter any issues while having said magazines should he encounter LEO for any reason..* preloading multiple magazines is a huge range convenience.. so unless cold hard fact dictates that I can not.. I will continue to travel with them... but hey I appreciate your response to this thread.. the only thing I would ad is Evan is an excellent authority on the law.. but he is NOT the law.. if you want to error on the side of caution and recommend things like unloaded mags.. then by all means recommend them.. but make sure that individuals know it is a RECOMMENDATION and NOT the actual law.. there is nothing wrong with being cautious.. but one thing we do not need more of is confusion?
-
saiga 7.62x39 sight crooked
this is the front sight I was referring to (I think)... sight drum is WAY to the left.. but like he said.. 2inch groups? that means the gun is running fine.. doesn't matter where the pin ends up.. also this is 5.45 gun.. so results may vary..
-
saiga 7.62x39 sight crooked
sometimes those words can be interchanged.. I have seen a couple that were bad enough that they would not zero.... but MOST of the time you can zero the gun even with the sight canted.. if the gun is zeroed and shooting good groups for me a little cant is not a problem.. but if way off then yeah.. it has to be addressed.. I was just telling him to zero the gun FIRST.. and then decide if it is even worth addressing.. as opposed to just pulling the gun out of the box and smashing it with a hammer..
-
How do you transport guns, mags and ammo to the range?
how sure are you that you did not misunderstand something that was said?
-
Explain red dot sights...
I am not sure that is the EXACT diagram but yeah something similar to that... and when I say pistol caliber carbine.. I am referring to something loaded up with some HD ammo.. I really like my CX4 for this.. it is small.. light.. has literally no recoil.. and is on target every time.. now obviously a pistol caliber carbine is going to be throwing the round with more velocity than a pistol.. but with HD ammo.. INTO the target.. I don't think you will see much over penetration? now if you MISS that is a whole different story.. in that situation.. depending on the wall and structure ANY round COULD go anywhere?
-
saiga 7.62x39 sight crooked
an AR.. it is just that the "fix" you create might be undesirable to some..
-
Explain red dot sights...
correct me if I am wrong.. but I remember reading an article on self defense ammo... 223.. and carbines... and supposedly with proper ammo choice over penetration can be minimized.. so honestly.. I would tend to agree.. I also share your views on 12 gauge.. I think in MOST situations a 12 gauge is too much.. but I STILL think that a pistol caliber carbine is the ultimate in home defense firearm.. because it combines ALL aspects into one..
-
What's your fav' NJ legal stock config?
totally depends on application... "run and gun" I like ACE Skeleton stocks.. the "entry" size was good with "run and gun" while utilizing a kevlar vest and mag rig, as the shorter stock got in the way less.. "distance stationary" I like the Magpul PRS... does everything I need for a stationary precise shoot.. but as stated.. it is all about the application..
-
saiga 7.62x39 sight crooked
you can try to smash the **** out of it with a hammer.. and you will likely get it "straight" to your liking.. but what I am explaining to you.. is that is all unnecessary if you can zero the gun with the block canted... and you will not be able to answer that until you try.. just looking at the sight post isn't going to tell you that.. there is a pretty substantial amount of travel in that sight post.. in fact I just helped a friend out with a Saiga the other day.. his post was WAY off center so I asked him about it.. but he explained even though it is was off.. the rifle was zeroed fine.. so he could bash the hell out of it with a hammer to get it to look straighter.. but what is the point if the gun is zeroed and shooting well? we ended up leaving it be.. if your cant is so bad you can't zero the gun.. then yeah.. its gotta move... but you are not bending a paper clip here..
-
saiga 7.62x39 sight crooked
did you try to sight the gun in with an AK sight tool? how do you know it is "off"
-
Cars
1991 LX Clear Headlight Housings Cervini's Hood Cervini's Wing Weld Rims M/T up front Hoosiers in the back BBK Header BBK X Pipe Flowmaster Exhaust Sparco Seats Replaced the carpet New floor mats What I am doing to it now.. Motor: 302, .030 over.. aka 306 rebuilt gt40 heads ford motorsports E cam 489/489lift roller rockers weiand intake MSD distributer msd coil ford racing plus wires holley 650 high flow water pump new rings/bearings in the bottom end Trans: c4 new torque converter 3200 stall B&M ratchet shifter/shift kit Harwood Cowl Panels Autometer Fuel Gauge Florida 5.0 cluster Custom autometer gauges Energy Suspension Transmission Crossmember Bushings Energy Suspension Motor Mounts/Motor Mount Inserts Hayden Transmission Coolers
-
saiga 7.62x39 sight crooked
yeah I know.. but what I am saying is.. front sight cant is very common in these guns.. normally less common in Saiga.. but still common none the less.. what I was saying is cant is unimportant if you can still zero the gun.. if cant is so bad gun can not be zeroed then yeah start bashing it with a hammer... it all depends on how off it is as to if it even matters..
-
saiga 7.62x39 sight crooked
also I wonder if "group size" is just that group size.. just because you are off center... does not mean the rifle is not shooting or capable of a tight grouping.. it just means it is not sighted in to center..
-
saiga 7.62x39 sight crooked
the general consensus is that most of the people who work there are drunk while working on these guns.. I would sight the gun in with an AK sight tool... if the sight post is too out of spec (which it could be) you might need to nudge it with a hammer.. most of the time there is plenty of adjustment though..
-
saiga 7.62x39 sight crooked
did you sight the gun in? or just shoot it as it was out of the box?
-
staying 922r compliant, with romanian wood
this is my favorite thus far.. http://store.carolinashooterssupply.com/servlet/-strse-460/Saiga-Lower-Hand-guard/Detail
-
staying 922r compliant, with romanian wood
I have a few Saigas... I have a Saiga 12 now and that is pretty much untouched except the bolt.. but the two rifles I have at the moment are two different directions... one wood one synthetics.. Saiga 7.62x39 Ace Stock Ace Internal Block Dinzag Tapco G2 FCG Hogue Grip Tromix Bolt On Charging Handle Surefire 15 Round Magazine Kvar Lower Handguard CSS Lower Handguard Retainer Ultimak Gas Tube Vltor Quick Release Flashlight Mount Surefire G2 Aimpoint H1 Saiga 5.45x39 AK Gas tube Bolt on lower retainer Tapco wood Tapco G2 Old 223 (no longer owned) Saiga 223 Kvar Stock Tapco FCG Tapco Saw Pistol Grip Tapco Hand Guard (with covered rail) Dinzag Lower Hand Guard Retainer AK Gas Tube
-
staying 922r compliant, with romanian wood
the calculator is accurate to my understanding.. I use max 9 foreign parts.. and so not count on magazine parts... but there is nothing saying you HAVE to follow that logic.. but the reason for this is ANYWHERE any time ANY magazine I am still compliant.. how stupid would it be to not be able to legally borrow your friends loaded mag at the range? just get 10 minimum without relying on the magazine.. and you are good to go IMO..
-
biometric safes
when not home.. ALL of my guns are locked up in a very heavy.. very fire proof safe.. so I am with you there.. I think that when I saw biometric safe... handgun.. etc.. I immediately thought "hd situation in which there are kids.. " as that is normally what prompts people to get these..
-
biometric safes
I have never really subscribed to the "uh oh something is happening go get my gun mentality" for me I think it would be over before even reaching the safe.. can't you guys with kids just carry something really small on like an IWB holster? granted I have no kids so my experience is different.. but I have been around more kids than you can count while actively carrying a loaded gun IWB.. I carried little kids around.. acted just as I normally would.. never had issue.. would it not be more valuable to have your gun on you? maybe I am a little paranoid for most people.. and I get that.. but for me there would be nothing worse than slowly bleeding to death on my own floor as I sit inches away from the safe that hold the tools to my safety.. better to hope for the best? but yet be prepared for the worst?
-
Another Open Carry Video
well that IS a LARGE chunk of the problem.. we as a society have demonized guns with such vigor that a normal looking guy with a holstered gun has now become something "suspicious"... what was funny is when I am up in the PA mountains.. and walk around with a holstered gun.. I barely get a glance.. all about location.. location is everything..
-
Would this be considered NJ Legal
oh I hear you.. and I think that is maybe where we crossed signals.. a thumbhole stock is PERFECTLY legal.. but I STILL think it is counted as a PG in NJ.. meaning I CAN have one on my CX4 storm (which does not have any other "evil features".. but I CAN'T have it on my Saiga 12 because a PG on a semi auto shotgun is illegal.. so it is not the stock itself.. the splitting hairs point comes in when you are deciding as to if it counts as PG or not.. which IMO in THIS state.. it does.. no hard feelings intended..