Everything posted by NJdiverTony
-
Apex tactical DCAEK and Universal sight tool
The only problem with Burwell from what I hear though, is that it's almost impossible to get a hold of him to get your M&P worked on by him. I've talked to at least 2 different people that had tried calling and emailing him to get there pistol worked on and he never replied to their calls or emails. So they went with the Apex kits and never looked back. I've seen the same reports on a couple of different online forums as well. I don't know if it's because the guy is so busy or just not that into his business. Even with my technical skills... I don't know if I feel comfortable with making all the radical changes to some of the parts as depicted in his trigger job tutorial. The Apex kit at least makes me comfortable that I'm putting good parts into the gun that I don't have to worry about causing any failures later on.
-
Apex tactical DCAEK and Universal sight tool
Mine is about 4.5 lbs
-
Apex tactical DCAEK and Universal sight tool
The Apex DCAEK is an awesome upgrade for the M&P. I put the DCAEK into my full size M&P 9mm back a few months ago and the difference between it and the stock parts was like night and day. My M&P has now become my most favorite pistol to shoot, next to my 1911. I love the smoot trigger pull and the very nice short reset that the DCAEK gives me. I didn't use a sight tool to do the work on mine... I just carefully clamped down the slide and used a brass punch with the tip wrapped in tape to get the sight out. Several light hits with the hammer and I was able to get the sight out without any issues... I'm sure the sight pusher is a much more elegant way to do it... but I was able to do it without damaging or marring the sight or the slide. Just a question, why didn't you replace the trigger spring that comes with the kit?
-
PMC X-TAC LAP
Interesting... with my limited knowledge I always thought they were armor piercing... So, this is good info to know. We were playing around with M855 ammo at my buddy's place out in the mountains of PA just recently and were able to blast holes through a 3/8" thick steel plate. It was Lake City XM855 green tipped rounds... We also tried XM193 and it only put small dents in the steel plate. EDIT: Forgot to mention that we were shooting at the steel plate at 100 yrds and were putting holes through it with the XM855... Maybe it was a soft steel???
- NJ bill to ban laser pointers
- Case recommendation for AR?
- NJ bill to ban laser pointers
-
NJ bill to ban laser pointers
This is just totally stupid... 1mW is so weak that it's a joke. Laser pointers have many uses outside of firearms as well. Amateur astronomers use them pretty frequently. I'm a pretty serious amateur astronomer, and use hi powered green laser pointers for pointing out stuff in the night sky when giving presentations to groups at "star parties" or teaching someone who's new to astronomy. It's not uncommon to see astronomers that have laser pointers that are upwards of 150mW and even stronger. They are of course always used with the utmost care and never pointed in the direction of an aircraft. But as you guys stated... Good ole NJ is at it again... wasting time and taxpayer money on things that really don't accomplish anything. How about they tackle something that really matters, like creating more jobs in this state or lowering property taxes!?!?!?!
-
PMC .223 55gr for 5.99 a box w/ free shipping code
Got it. Thanks for the info. Now off to order some ammo! LOL! Sent from my SAMSUNG-SGH-I727 using Tapatalk 2
-
PMC .223 55gr for 5.99 a box w/ free shipping code
Cool... So if you call cust service they can give you rewards card? I have the club visa already.
-
PMC .223 55gr for 5.99 a box w/ free shipping code
What is the rewards card that you guys are mentioning? Is is the Cabela's Club Visa, which earns "Club points"?
-
Signed up for Hunter's Ed 10/21/12
Jim, Trad bows are great, but require LOTS of practice. I've been shooting a recurve for about 4 or 5 months now, and practice just about weekly at my range or in my back yard, and I have to tell you that it will take a lot of time until you are good enough with it until you can hunt with it. You are right that your immediate goal is to pass the hunters ed test... but I'd also caution you to not spend money on a cheap crossbow that you're going to end up needing to upgrade anyway. You're better off spending just a little bit of cash and buying a used but in good condition compound bow. If you can practice for the next few weeks until you take the test, you'll be easily able to pass with the compound bow. For the test they will ask you to get 3 arrows in the vitals of your target from about 15 to 20 yrds. With a compound bow, that will be easy. Do you know what your draw length and draw weight is? If so, I have a very nice compound bow that I picked up from a fellow NJGF member for the same exact purpose as you. Since I got it from the previous owner I had it serviced and put new strings, silencers, and etc on it and had it tuned up... so the bow shoots great. It comes with a bunch of new arrows that I bought for it, some hunting broadheads and a quiver too. The NJGF member that sold it to me, had a condition that he wanted me to pass this onto a new bowhunter for the same price that he sold it to me for, just as he did with me. If you're interested, let me know and I can send you some more details. $150 for a complete compound bow set that will get you past your test and that you can also easily hunt with... Once you get some more experience and want to upgrade, I'd just ask that you keep on the tradition and pass this on to another new bowhunter as well. PM me if you're interested.
-
5.56 Ammo (M193 vs M855) grouping out of 1:7 twist barrel
Thanks for the info. Much appreciated. The best would probably be for me to start reloading .223 and come up with a recipe that my AR really likes. I already reload for pistol but have been putting off reloading for rifle, as it's kind of a pain in the ass and time consuming (as compared to pistol ammo loading).
-
5.56 Ammo (M193 vs M855) grouping out of 1:7 twist barrel
I know that their trajectories are different... so I was shooting to observe groupings, not for bullseye's... so there wasn't a need to re-zero. As long as I was aiming at the same spot to ensure consistency, then that was fine.
-
5.56 Ammo (M193 vs M855) grouping out of 1:7 twist barrel
I tried shooting several seperate groups at various distances at the range, to see the results. The M855 consistently gave me groups that were 2 to 3 times larger than M193. At 50 yrds, I had .5" groups with M193, whereas the M855 gave me 2" groups. At 100 yrds, I had 2" to 3" groups with M193 and 5" to 8" groups with M855. It was a really big difference.
-
5.56 Ammo (M193 vs M855) grouping out of 1:7 twist barrel
See... I knew you guys would be able to able tell me! LOL. Thank you for the excellent and very informative answer! With that being said... is there any other ammo besides XM193 that you guys would recommend for good accuracy at 100+ yrds out of my 1:7 twist, 14.5" barrel?
-
5.56 Ammo (M193 vs M855) grouping out of 1:7 twist barrel
So, I was at the range the other day with my AR... I have a 14.5" barrel with 1:7 twist... Theoretically, 62gr M855 should shoot better out of this barrel and give me tighter groups, but I found that regular 55gr M193 gave me much better and more consistent groups. Can anyone tell me why this would happen? Just from what I've read, the opposite is supposed to be true (heavier bullets stabilize better and have tighter groups through a 1:7 barrel). It's not a big deal... but it just made me curious. What do you guys think?
-
AR pics, lets see'um!
Yes, good point which I neglected to mention in my previous post. I do place my hand all the way towards the end of the handguard for that exact reason. I can transition faster and more precisely from target to target this way.
-
Bolting Rabbits.
That's really cool! Those rabbits are pretty big, too! Sent from my SAMSUNG-SGH-I727 using Tapatalk 2
-
AR pics, lets see'um!
It depends on the build... Mine has a lightweight pencil barrel and a very lightweight rail, so it doesn't feel heavy at all. My rifle is a little over 7 lbs, with optics. I am also a big & tall guy, so the long rail is more comfortable for my long arms. Also like the longer sight radius and just plain think the long rail looks badass... So it's aesthetically pleasing to me Sent from my SAMSUNG-SGH-I727 using Tapatalk 2
-
AR pics, lets see'um!
I was playing around with my wife's camera equipment (she a pro photographer) and took this shot of my Spikes Tactical AR... The sun was too bright, so there's a lot of contrast... Next time I'll just have her take the pictures... I'm sure she'll do a lot better! LOL!
-
Best option for small game
Nick, good advice... I field dressed my first deer last year all on my own as I usually hunt alone (no hunting buddies around where I live) and it was lets just say.... an experience... LOL. My only experience until then was dressing rabbits and birds... and chickens on my grandparents farm when I was a kid. Man, once I got the deer cut open, the smell was pretty bad! LOL! I'm one of those folks with really sensitive olfactory senses. I won't lie.... I gagged a few times... It took me a while as I went slow and methodically, as it was my first time... but I pushed on and I got it done. I like your idea of the bandana with some kind of scent on it... I'll have to try that out nex time.
-
Best option for small game
No worries, dude... Field dressing small game is a easy, as long as you're not squeamish. Just go slow and careful with the knife. It's nothing like dressing large game, such as deer, which is a lot more involved. I'm sure you can find lots of videos online that can show you step by step, how to do it, as well.
-
Best option for small game
Shotgun, and use small game loads. You won't destroy the game... no worries. I've hunted small game since I was a kid, with my dad, when we lived in Europe... and the weapon of choice was always a 12GA side by side. I haven't been small game hunting in a few years though... These days I mostly hunt deer... but would like to eventually get back into small game. EDIT: You'll want to sign up and take a NJ Hunters Education course, as soon as you can... so you can get a hunting permit. Then try and read up as much as you can about hunting small game to learn what yu can and also see if you can find someone experience that you can hunt with that can mentor you. If you're goign to be hunting rabbits and birds, it also helps if you have a good hunting dog... it'll increase your chances of success by quite a bit.
-
AR pics, lets see'um!
VERY NICE!!!