Everything posted by NJdiverTony
-
You know your a gun-nut when
<p> End of the AWB, and I think it was Sept. 13th, 2004.
-
Any F 15 fans out there.
AWESOME video! The F-15 has always been one of my favorite modern warplanes.. along with the the F-16.
-
You know your a gun-nut when
Haha... good stuff.
-
Wishing Well to One of Our Own
LOL! We used to hear all the stories about boot camp in the Great Lakes during the winter, when I was doing boot camp in Orlando Florida in the middle of the summer, in the late 80's. Orlando in the summer was just as bad as Great Lakes in the winter. The fall is probably the best time of the year for boot camp in the Great Lakes. Vic, from one squid to another... Good luck and thanks for your service to our beloved country!
-
Spikes Tactical 14.5" Lightweight 5.56/.223 DynaComp BAR-12 Upper Receiver
OK, thanks for checking and letting me know. I had no issues at all with the rifle functioning, and sounds like you didn't either... so it's probably normal.
-
CTS vs STR vs ACS-L vs ????
I just got the Magpul STR today and put it on the rifle... It's sweeeeeeeeet! The cheek weld is awesome and super comfortable. Great stock! I was teetering back and forth between the STR and the ACS-L... but decided on the STR in the end. Definitely a good choice. Thanks for all the help, guys!
-
Anyone get out for opening weekend of Fall Bow Hunting?
Temps should be steadily cooling over the next few weeks... I can't wait to get out in the woods! Zone 12 for me.
-
Anyone get out for opening weekend of Fall Bow Hunting?
It was pretty warm on Sat... But hopefully it'll start cooling off quickly in the next few weeks. Good luck this season!
-
Anyone get out for opening weekend of Fall Bow Hunting?
That's what they make Permethrin for... Never get any ticks, even walking through the thickest of woods, when I treat my clothing with it. Don't know about chiggers... Never had run-in's with them around my parts.
-
Anyone get out for opening weekend of Fall Bow Hunting?
The butcher is 10 minutes from where I hunt... So no need for ice, GUY. Plenty of folks hunting already in my area (Hunterdon county). Do you hunt for fawns? I don't... GUY. In addition, can't shoot a buck until a doe is harvested first until Sept. 29th... at least in my zone. Until then, just hunting for doe's to put some meat in the freezer.
-
Anyone get out for opening weekend of Fall Bow Hunting?
Did anyone get out this past weekend to hunt? Any success? I was supposed to go but my plans got squashed by other responsibilities that came up the very last minute. I had all my gear loaded and all... so I was pretty disappointed. I'm hoping to get out very soon though.
-
Hunting saftey test/course advice
You're better off leaving your shotgun at home and use the ones that they provide. It moves things along a lot faster when people don't bring their own guns to the class.
-
Spikes Tactical 14.5" Lightweight 5.56/.223 DynaComp BAR-12 Upper Receiver
Thanks raz-0, Yeah, it's just a little bit of the reddish brown stuff... I noticed a little bit of it on the rail too (the Spikes BAR rail has a lot of openings to maximize ventilation/cooling of the barrel and to cut down on weight, so it's easy for the dust to build up on teh outside of the rail)... but the rifle cycled flawlessly so I didn't get too worried. I did some searching around for info and found that some say that this is somewhat common with a brand new upper... and after about 500 to 600 rounds, it should stop or greatly diminish as the carbon that builds up in the area where the gas tube and gas block meet will create a good seal. I don't know if that's truly accurate or not, but it sounds plausible I guess.
-
Spikes Tactical 14.5" Lightweight 5.56/.223 DynaComp BAR-12 Upper Receiver
Wayne, did you notice if you got any light carbon build up around the gas block or on the BAR rail directly around the gas block?
-
CTS vs STR vs ACS-L vs ????
Thanks for the offer Nick, I appreciate it. Tomorrow is opening day for deer hunting (bow) so I'll be sitting in a tree all ninja-like and waiting for a nice big deer to come my way! LOL. Sent from my SAMSUNG-SGH-I727 using Tapatalk 2
-
CTS vs STR vs ACS-L vs ????
Thanks for the info, all. I think I'm leaning towards the STR, but still not sure. I want something for run and gun and occasional bench shooting.
-
Spikes Tactical 14.5" Lightweight 5.56/.223 DynaComp BAR-12 Upper Receiver
Thanks, let me know how you make out. The last time I used it, I had a regular carbine buffer in it... I have since swapped it out with the Spikes heavy buffer we got from AIM, but haven't had chance to take it to the range yet. From what I understand though, the Spikes buffer will work just fine with it (while shooting .223 or 5.56).
-
Spikes Tactical 14.5" Lightweight 5.56/.223 DynaComp BAR-12 Upper Receiver
Any of you guys that just recently picked up the Spikes upper... got a quick question for you. Have you guys noticed any minor gas/carbon leakage from the low profile gas block on your uppers? I noticed some on mine (a little bit of carbon build up on the section of the BAR rail that is directly over the LP gas block and on the barrell adjacent to the gas block). It's nothing major, as the carbon cleans up easily and the rilfe cycles like a champ... so I'm not too worried. I'm thinking that this will go away after a few hundred rounds as carbon builds up in the gas tube and forms a tight seal where the gas tube meets the gas block. What do you guys think?
-
CTS vs STR vs ACS-L vs ????
Hey guys, I currently have a regular M4 stock but want something nicer, so been thinking about changing it out. I've been looking at the Magpul CTS, STR, and ACS-L... but nto sure which would be best for me. Since I can't see them in person and picture what they will look like on my rifle or feel how they would work on my rifle (cheek weld, confort, etc.) it's making for a really tough decision. Here's a pic of my rifle below... Spikes 14.5" middy... Any other stocks I should consider besides the Magpul's and why? If you guys could help me figure this out, I'd really appreciate it.
-
So much for the smartphone being the epicenter of revolutions
Ughh... yet another reason to hate Apple. I can't stand them and their products. They are totally against competition in the free market... and obviously now also against freedom.
-
Remove spent primer BEFORE cleaning?
+1
-
Remove spent primer BEFORE cleaning?
You don't have to clean primer pockets for pistol brass... the reloads will work just fine if you deprime after cleaning and don't clean out the pockets. I've never had a problem doing it this way, when I was using a vibratory tumbler and dry media (crushed corn cob or walnut). BUT, in the last few months I have switched over to cleaning my brass with stainless steel media... so I now decap (with a decapping die) before cleaning and then my brass comes out looking like brand new... including the primer pockets.
-
+1 Keorange57
It was great to meet you, Kris. Hope you enjoy the upper.
-
Anyone fly or used to fly r/c airplanes?
Very nice planes!!!
-
Anyone fly or used to fly r/c airplanes?
Been flying R/C planes and helis for a few years now. I currently own a Parkzone T-28 Trojan (excellent and cheap plane!), a couple of 3D planes, and an Align T-Rex Heli. I had more planes and heli's, but as with all of my other hobbies, as soon as I had kids and my life got a lot busier, I ended up spending less and less time on my hobbies and I sold a bunch of what I had. Great hobby, but depending on how deep you want to get into it... it can get as expensive or MORE expensive than guns. As my son gets older (he's 5 now), I'm hoping that I can get him interested in it and build a plane or two with him from scratch and get them in the air together. @ RecessedFilter - I'd advise you to not spend your money on a cheap trainer and instead invest in a good simulator first. If you know you're definitely going to get into it, then also buy a good radio (I really like Spektrum RC radios). You can can then hook up your radio to your PC and use it on the sim and learn to fly with your actual radio that will use on the real plane. If you spend enough time on the sim, you'll be fine with flying a real plane. You can then get a nice (but easier to fly) plane for your first plane and you'll be comfortable enough to fly it with all that sim time under your belt. If you can also spend some time with a seasoned R/C pilot, so that you can learn from them... then that's even better. You can fly with them and they can give you lots of great advice and help as you develop your skills. Heli's are a different story... you need to spend a LOT of time on the sim and then taking baby steps with a real heli unti you get comfortable enough to fly them well. Even after years of learning to fly heli's, they still scare the crap out of me and I can't fly them all that well. I've smashed mine into the ground more times than I can count, and have rebuilt them so they were like new again... THAT gets expensive!!! LOL! Thankfully I'm the kind of person that likes to build and tinker with things... otherwise I would have given up a LONG time ago! Good luck and if I can help with any advice, let me know!