Everything posted by NJdiverTony
-
12GA vs 20GA slug gun for deer? Single Shot or Pump/Semi?
Yep, it's chambered for 2 3/4" shells.
-
12GA vs 20GA slug gun for deer? Single Shot or Pump/Semi?
Funny thing is that I don't know... I've had the gun for probably about 20 years... I bought it used but in great condition for $80 from an old guy I knew back then, but never fount out if it was gas operated. Is there any way to tell if it is? All I ever cared was that it worked well... Took plenty of small game with it over the years, and shot lots of skeet with it as well, and it has always worked like a champ. Any advice on where I can look up some info on how to pattern it?
-
12GA vs 20GA slug gun for deer? Single Shot or Pump/Semi?
OK, will do. That would be great and appreciate the offer. I'm due for a range night... I'll PM you if I'm able to make it.
-
12GA vs 20GA slug gun for deer? Single Shot or Pump/Semi?
Thanks j0n. I've been trying to find out if my current 12GA semi-auto (Ithaca/SKB 300XL) will handle buck shot.. but can't find any info on it. It's an older gun.
- Second Gun
-
12GA vs 20GA slug gun for deer? Single Shot or Pump/Semi?
Thanks... Doesn't sound too bad. If it's comparable to my 30-06 rifle, then that's not too bad at all. Plus, you're right that the layers of clothign will further absorb some of the recoil. Got another dumb newbie question... Can you use a scope on a slug gun, or are only the adjustable sights on the gun allowed by NJ hunting regulations?
-
12GA vs 20GA slug gun for deer? Single Shot or Pump/Semi?
I'm sure I can handle the recoil... as I'm 6'2" and 255lbs... but the question is do I want to? LOL! I own a 12GA shotgun that I've mainly shot tons of birdshot with, so that recoil isn't bad at all. How much heavier is the recoil when shooting slugs? Does it kick like a mule? Is it comparable to a 30-06 hunting rifle? I have one of those as well, and although it kicks hard.. it's not unbearable. From what I understand, the 20GA slug guns are much softer, recoil wise... but easily bring down deeer (at least that is what I've read on hunting forums). So... just trying to figure out which is best to go with.
-
12GA vs 20GA slug gun for deer? Single Shot or Pump/Semi?
Talking about public land... Do you guys know if Round Valley Reservoir is considered public hunting land, during deer hunting season? I only ask because I live right by there, and I've seen tons of deer while hiking there.
-
12GA vs 20GA slug gun for deer? Single Shot or Pump/Semi?
Going to be looking for a slug gun for hunting deer in the near future. Is a 20 gauge slug gun preferrable over a 12 gauge, due to the heavy recoil of the 12GA? I have never fired a slug through a 12GA so don't know what the recoil is like, but from reading stuff on the interwebs... it sounds like it's a b*tch to shoot. Also, are single shot slug guns good vs. pumps/semi's? I would think that you probably won't get a chance to squeeze off a 2nd shot if you miss, anyway... so why the need for pumps/semi's? If the first shot is a miss, then I'm sure the deer will be long gone before a 2nd shot is even possible. The H&R single shot slug guns look pretty nice, and are very reasonably priced... Anyone know anything about them? Any advice from some of you seasoned deer hunters would be appreciated. I've hunted for a good portion of my life, but always small game... this coming season will be my first time huting deer and really looking forward to it! Mod's... this post is kind of 50/50 and could go either into the shotgun or hunting forum... if it needs to be move into the hunting forum, please let me know.
-
OAL's and Pressure
I'm definitely not touching the lands/grooves with the bullet... So, it shouldn't be building up additional pressure.
-
OAL's and Pressure
Just trying to figure out the effect of increasing OAL, from that which is asked for in a reloading recipe. I need to get a chrono eventualy to try some of my reloads and see what kind of velocities I'm getting.
-
OAL's and Pressure
That's what I figured... but thought I'd check with you more experience reloaders anyway. This was just more curiosity, as when I look at some of the recipes that I'd like to use in my reloading books, they list a shorter OAL like 1.075" or 1.095". For my 9mm loads I try to stick around 1.125" which seems to work well in my Berettan 92. By using the longer OAL, I'm trying to figure out if I'm significantly reducing pressure and/or velocity. Another question I think of is, if I use somewhere near max charge for any given powder in a recipe... and you're using a longer OAL than the recipe asks for... are you still really at max charge? I'm thinking that the longer OAL reduces the pressure being built up behind the bullet... is that right? My background is technical and electronics engineering, but I do have a very analytical personality. It's a curse sometimes, because I can be to analytical and anal with details.
-
OAL's and Pressure
So, I've been thinking about something and have tried looking up some info online but haven't found much... My question is, if a reloading recipe calls for let say an AOL of 1.075" on a 9mm round, and I go ahead and make my OAL 1.125", am I effectively reducing the ammount of pressure that is put on the bullet by a major factor when the round is shot? Is there a way to find out by how much, without using a chrony? I was thinking that if a recipe shows you pressure info with their OAL, what kind of formula can I use to figure out the change in pressue with longer OAL I will use?
-
Best value in tumblers nowadays?
I've got the Frankford Aresenal Quick-N-EZ tumbler package, which I bought a couple of months ago and works great for me. For $73.99, not a bad deal... and if you get a sale or coupon code to use at Midway, it's even a better deal. Here's some info about on the package: Technical Information: Bowl Capacity: 600-9mm cases or 360-223 Remington cases Media Included: Yes 3 lbs of Corn Cob Media Kit Includes: Frankford Arsenal Quick-N-EZ Case Tumbler, Rotary Media Separator, 3-1/2 gallon bucket, 4 oz Brass Polish and a 3 lb bag of Corn Cob Media I bought it from Midway... here's the link: http://www.midwayusa.com/viewProduct/default.aspx?productNumber=414369
-
some quick reviews of reloading stuff I bought
I guess YMMV... I reload lead SWC's in .45ACP and haven't had a single issue... They factory crimp die works great... I just put a very slight taper crimp on the case, to bring it to spec, and there is no change to the bullet at all. I've actually tested this out by seating and crimping a few dummy rounds and then used a bullet puller and measured the lead bullets and there was no change to the bullet size at all. My loads are very accurate through my 1911 and haven't had any failures whatsoever.
-
CCI Primers on sale at Grafs.com
Dohhh... I didn't even think about that!
-
CCI Primers on sale at Grafs.com
Good sale on CCI large and small pistol primers at Grafs.com! $114.99 for box of 5000 primers. Plus free shipping and handling if your order is over $75... so all you pay for is the Hazmat fee. I just bought a box of each as I load 9mm and 45ACP, and came out to $255... GREAT deal!
-
some quick reviews of reloading stuff I bought
Yep, the factory crimp dies are great! I have loaded a bunch of pistol ammo in the last couple of months since I started reloading, and I love the Lee factory crimp dies! They work great and are very consistent. I forego the crimp during the bullet seating and just seat the bullet, and then crimp with the factory crip die. Not a single failure with any of my ammo either. 100% success rate so far on about 1,000 rounds fired.
-
Which 9mm RANGE Handgun $600 or less? (no conceal and no carry)
I totally agree with you Glenn... A Glock 19, although a good CCW pistol, is not a good target/accuracy gun. So many other choices out there that are way more accurate and easier to shoot for target shooting.
-
Finally picked up my Sig
No prob bro... You can just come down to my place and we can shoot on the weekends. The good thing is that even if it's one night a week during the summer, you still have a place nearby to shoot. It beats having to drive a long distance.
-
How Many Rounds To Break-In New Gun?
Here's a video that shows the disassembly to replace the spring: http://www.beretta92fs.com/video.php?id=211 And here's the reassembly: http://www.beretta92fs.com/video.php?id=304 These vids are based on the 92fs... The only difference in the 92a1 is that the pin that pulls out so easily for the 92fs in the vid, takes a punch and hammer to get out in the 92a1. Also the same to get it back in during reassembly. Its a pretty tight fit so it took some effort on mine.
-
Natchez Mag Sale
I just bought Beretta factory 15 rounders for my 92a1 from Midway a week or two ago for $17.99. Great deal I think. They had a sale on mags. Bought some Wilson Combat mags for my 1911 while I was at it.
-
3 pack flashlights at Costco
I bought these same 150 lumen tactical flashlights at Costco a few months ago... They work great for the price and are SUPER bright! I keep one in my nightstand and the other 2 around the house. I like that they work with regular AAA alkalines and not some expensive batteries.
-
How Many Rounds To Break-In New Gun?
Eric, Here's the link for where I bought my "D" spring from: http://www.olhasso.com/PS/parts.htm. They seem to be out of stock at this time though. Only do this if you are comfortable with some basic gunsmithing... You'll need the right tools to replace the spring... But it's not hard to do. It just requires some disassembly and reassembly work on the pistol to change out the spring. I changed out the spring in my 92a1 and it definitely lightened up the trigger pull in DA and somewhat in SA... It was a worthwhile modification in my opinion. Tony
-
Finally picked up my Sig
Sounds great bro! Can you bring guests? Next time I'm up by you, we should get together and shoot... I can bring my toys too.