Everything posted by HavocMan
-
AK 10rd mags at Cabela's at 4.88 a piece
The description says it's a steel mag...and the reviews say it's a lousy mag, LOL. What's with Cabela's 'reviews' section anyway? They have reviews for all kinds of mags lumped together. You have to read through them all in order to find a review for the mag you are actually interested in. Kinda disorganized, eh?
-
my 1st lower build.. and new 14.5" Middy
I'd be very careful about sending anything to ADCO these days. Anybody here on Lightfighter.net? A member there sent ADCO his AR to have a brake pinned & welded. They buggered it up big time & refused to accept responsibility. The guys at JOJO's up in CT fixed it up.
-
First AR
Yep. The first AR I bought was a Bushmaster. I learned my lesson the hard way... I bought this rifle during the Federal AWB - from Navy Arms - so that'll tell you how old the rifle is. I didn't fire it much at all for years. In February of 2006 I bought a new upper for the rifle & I began to put some rounds through the weapon. I bought a bunch of XM855 from AmmoMan. On April 16, 2006 (after firing only 810 rounds since the day I bought it!!) the bolt cracked at the cam pin hole, but I did not discover it right away. The rifle began to eject erratically & unreliably. Lots of FTE's. Yes, I keep a very detailed log book for each of my long guns. At the 1830 round mark (14 August 2006), the gas key shot loose! Between April & August, the rifle was completely unreliable - two, three, four rounds out of each mag would FTE. I just suffered through it. I changed buffers & springs, tried all kinds of things but nothing fixed the rifle. Then on the 14th the rifle locked up & I discovered that the gas key was loose. In fact, the key was not staked AT ALL. I then did a little research on Bushmaster gas keys ... LOL!! So, I staked it myself. The rifle ran a little better for a while...but still not perfect. I still had alot of FTE's. I finally discovered the cracked bolt on November 27, 2006. By this time the rifle had 3560 rounds on it. I believe that this was the cause of the original FTE's back in April - I just never noticed the hairline crack. I usually cleaned the gun inside my apartment - not the best lighting. On November 27th I stripped the gun right there on the range and cleaned it right there - I saw the crack while cleaning the gun in the sunlight. I bought a spare Bushmaster bolt & carrier (DUMB!). I switched the parts at my next range session on December 5, 2006 and the gun began to run 100% perfectly, but I only put 360 rounds on the new #2 bolt - I didn't trust the Bushy parts. I bought a LMT bolt and installed it on January 7, 2007. The rifle now has 5650 rounds on it and it has run flawlessly since installing the LMT bolt. I will not ever buy a Bushy again. It's BCM, DD, Colt or S&W for me from now on. .....and don't get me started on EoTech, LOL! I have one, but it's junk & I can't wait to replace it with an Aimpoint.
-
AIM Spikes Lowers (Zombie, Punisher, Regular)
SOG Armory sells similar lowers - but they are more expensive. I have no idea who makes them for SOG and I've never used one. Just throwing it out there for folks who might be interested: http://www.sogarmory.com/Products.aspx?CatId=173
-
Old Bridge Zombie 3 Gun
OK, so I read the IDPA rules over. If the pistol portion of the meet is going to be IDPA based, shooters will need a concealment holster and a concealment garment, right? Since I'm a complete newb to this, I'd really like to hear what most folks are using for both. School me please!
-
PMag Group Buy
Dang. If another group buy materializes, I'm in for 5 curved stubbies.
-
How to tell if an AK-47/74 is NJ legal?
I think I'm gtg as far as 922 goes... Barrel, break, front trunnion, rear trunnion, bolt & bolt carrier are the only original commie parts being used. That's 6 and the magic number is 10, right? So I have some wiggle room if someone wants to include the piston as a seperate part from the carrier. Everything else is coming from Tapco, K-Var, AK Builder and Krebs.
-
MY SHTF Logic for handguns
hmmm...your ideas are intriguing to me and I wish to subscribe to your newsletter.
-
How to tell if an AK-47/74 is NJ legal?
So if I am going to build an AK from a demilled Romanian G, I can just weld the original slant break on, grind off the bayonet lug, feed it with K-Var 10rd double stack mags and I'll be GTG? That qualifies as 'substantially different'?
-
Old Bridge Zombie 3 Gun
Hey all. I am completely unfamiliar with this type of competitive shooting but I'd like to learn more & eventually get involved. Shooting & moving is obviously far more attractive than standing/sitting/proning out at a firing line all the time. Are there any other rules besides what's mentioned in the first post? Is there a web site I can check in order to get some more detailed info? I'm also wondering if any of the weapons I own will be appropriate. For instance, I own a S&W M&P9 FS, an AR with irons and an EoTech and an 870 with rifle sights. Am I gtg? I have mags & ammo for the M&P and the AR. I can get some birdshot.
-
Newb From North Jersey
Hey all. I just ran across this forum while searching for some info. I wanted to be sure that my DSA FAL was still GTG here. I was also curious about perhaps shooting down at Ft. Dix. I found the info I was looking for Does anyone know if any of the ranges on Picatinny are open to the public? I'm a member at Cherry Ridge. The CR range is good, but I imagine that the ranges at Picatinny are pretty nice.