Skip to content
View in the app

A better way to browse. Learn more.

New Jersey Gun Forums

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

HavocMan

Members
  • Joined

  • Last visited

Everything posted by HavocMan

  1. If things go sideways in the NY Metro area, I'm prepared to sit tight for about 2~3 weeks (food, water, security ... all GTG). If things haven't gotten squared away by then, I'm heading north to my sisters place up in NH. I'm prepared to do that by car, bicycle or on foot if I have to. My only concern is crossing the Hudson River if the bridges are gone...figuring that out might suck - especially if I'm on foot. As for my BOB itself, I've got a Kifaru pack with all the usual stuff in it. It's in the trunk all the time. I replenish/replace the food stuffs regularly.
  2. Drunk in a parking lot firing a rifle around .... nice Thanks for perpetuating the stereotype and setting us back about a gajillion years, jackass.
  3. I have the large version on my AR's. Night and day difference between the BCM CH and the original type of CH. The pivot geometry on the BCM CH is more durable and less likely to fail - that's the big attraction, not just the size of the lever.
  4. Darwin Lives! Scyence, bitchez ... it worx!! LMAO!
  5. Too bad the vids don't show all the vibration, barrel whipping and bending that goes on with the AK ... LMAO!
  6. More than likely rejects from an M249. I have a a few .50 cans full of 5.56 ammo like that. Some of it is ok, but most of it is junk after getting squashed by the M249's action.. FYI - if anyone runs across cartridges that have had the bullet set back, don't use 'em. They be dane-gu-bus!
  7. I've been very happy with Ron up at Ramsey Outdoor in Ramsey on Rt. 17. I've bought two guns from him recently. He's been able to get me the lowest prices. Both guns were special order pieces too. I'll likely go back to him for the next few things I have my sights on.
  8. If we're going to talk about NFA stuff, I'll take a Thompson please! After that, a Sterling. Next would be an Artillery Luger with that crazy drum mag and a shoulder stock...and since we're just dreaming, please make it .45ACP, HAHAHA! And who wouldn't want an M2HB? While I'm at it, give me 4 of the guns and the M16 Half Track too, LOL!! And last but FAR from least, I'd like a German FLAK 38 ... HAHAHA! Nothing too fancy, just a single gun - with the shield please - on that little trailer. Whew! .... I'm spent...
  9. Yep, this gun has the FSS and trigger kit. I was afraid that the trigger would disqualify me from Production Division. Oh well, looks like I get to buy a M&P45 and give major a try, lol. So, as long as I keep the S&W trigger in the 45 I'll be gtg in Production DivIision, right? A trigger job is ok, righ? Thanks for the belt link too!
  10. I'd like to get involved in competitive USPSA shooting. I ordered a Bladetech Holster and mag pouches. They arrived a few days ago. I also bought one of their belts, but I just recently found out what an "inner / outer" belt is, so I'm now looking for one of those (this is where every points and laughs at the newb, lol). It seems like a much more practical setup. I have three 15 round mags for my M&P9 FS now and I have three more on the way from G&R Tactical. My real question is about my M&P9. The pistol has a rear sight from 10-8 Performance and a front sight from Trijicon. I also replaced the trigger with APEX Tactical's Forward Set Sear and Trigger Kit. Can I still shoot in the Production Division with these modifications? Lastly, does anyone know where I can get a simple, BLACK, inner/outer belt? Everything I've seen online is either blue, red, neon green - even pink (??) LOL!
  11. HavocMan replied to JackDaWack's topic in Shotguns
    Haters. LOL
  12. If you decide that you want to get into target shooting first - and hunting later - a good rifle to start with is a Remington 700. This is a bolt action rifle. A 700 chambered in either .308 Winchester, .300 Winchester Magnum or .338 Lapua will be more accurate than any of the lever guns you are considering - especially when you are talking about stretching the range out to 300 yards or more. The 700 in any of these three calibers will also be better than the .30-30 for taking deer if you do get into hunting down the road. On the other hand, if you simply like leverguns and want one, any of the leverguns you mentioned in your first post are fine. I wouldn't take a .357 Mag/45LC/44 Mag levergun out to hunt deer though. The .30-30 would be the minumum. The question you need to answer honestly is "What am I really going to do with this rifle?" Remember, you can always buy another rifle/shotgun to do a different job.
  13. I've been thinking about moving to Jackson, WY since last summer. If the weather reports are correct, summers out there are much cooler. If last winter was average, they aren't much different than here - they don't get buried with snow lke you would expect. I plan to vacation out there ASAP in order to check things out a bit. For you NH guys - I have family up there. They are 45~50 minutes north east of Keene. They get TONS of snow - so much that my sister and her hubby had to buy a truck and plow just to clear their own driveway. It was cheaper and more reliable than contracting with a local guy. Eventually my sister even had to learn how to drive the truck and operate the power angle plow - if it snowed during the day she had to clear the driveway so everyone else could get up the driveway and into the house at night!! We're talking Up To The Tops Of The First Floor Windows Deep Snow gang!! I can't even imagine what that must be like....
  14. ehh? There's a good part of Hackensack?? LMAO - sorry, that was just too easy. ...and what is wrong with people? I've heard of people that cut themselves (emo kids, right?), but this takes it to a completely different level.....like, Rabid Dog Level or something. The cops should have just killed the guy, done us all a favor. FTW
  15. You know, it looks like you're right about that. It's been on this gun for so long, I forgot which extension was used. I would have bet the farm it was just a regular carbine extension. However, a quick search of the intarwebz confirmed what you're thinking - the Sully Stock uses an oddball extension. So does the RR Entry Stock.
  16. The Sully Stock: http://www.thedefensiveedge.com/category_s/51.htm I have one on a carbine now. It's made of SOLID fiberglass....yeah, it's friggin' heavy. I'm going to switch to a pinned Magpul. Also, Rock River has their Entry Stock.
  17. Very nice! I've got a few questions for you.... Whose lower parts kit did you use to fill up the Spikes lower? How do you llike that Haley/IWC light mount? How is that Surefire G2 holding up to use on a weapon? It's not rated for that. I'm asking because I'd like to try the new P2X Fury (500 Lumens!!) on one of my AR's...in one of those Haley/IWC mounts.
  18. Aimpoint T-1 and their 3x magnifier, both mounted in LaRue QD mounts. Avoid EOTech. They've had battery box issues in the past. The jury is still out on their new, redesigned models.
  19. Do you guys hear that krinkling sound?
  20. No Jack, I don't have a chip on my shoulder. I'm not looking for an argument. I just hate seeing folks make the same mistake I did. That's part of what the intarwebz is all about - the dissemination of information I bought my 551 before the design flaw became known. When I bought the 551 it was EOTechs top model. Nobody knew about the battery box flaw. Now about the repair ... it's not the cost of the repair that is at issue. The issue is that EOTech charges customers to correct their design flaw. That's just lousy, isn't it? When design flaws crop up in the auto industry, cars get recalled and fixed for free. EOTech should be doing the same thing. It's the principal, not the cost. Here's a forum I spend alot of time on - www.lightfighter.net You wanna see some bad news? Well, check this out: http://lightfighter.net/eve/forums/a/tpc/f/2811094651/m/553102295/p/1 Just for giggles, I Googled "EOTech sucks". I got 455 hits. Then I did the same for Aimpoint - "Aimpoint sucks". I got 126 hits. Be sure to use the parentheses (" ") if you try to duplicate my hi-tech research, HAHA! This scyintific itarwebz research proves that EOTech sucks 3.61 times harder than Aimpoint! (455 / 126 = 3.6111 ) That's almost 4 times suckier! Scyence - it wurkz, bitchez! I rest my case your honour! LOL!! Let the buyer be ware! ....but buy what you like To the OP - sorry 'bout taking this waaayyyyy off topic! And once again - Good Luck with the new blaster!!
  21. hhmmm...can you get 16 rounds into the mags?
  22. I was trying to be diplomatic. Jack thinks I'm funny. So, time to call it like it is.... The EOTech stuff is inferior to the T-1 in every way. They are simply not as durable as the T-1. Their lightest model is more than twice as heavy as the T-1. They have very poor battery life compared to the T-1. The T-1 has a 10 year warranty - EOTech's is 2 years. The company has lousy customer service. "Why do I have to pay you to correct your design flaw?" Why buy second rate when there is better available for practically the same price? Know why I won't have my Eoturd fixed? Or why I won't sell it off? Because, deep down, where it really counts, I know that it is completely unreliable. It's junk. I won't use it and I won't sell my problem off to someone else.
  23. Wow - where did this happen? How were the guns being stored?

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.