Teky0101

Parker, Thats the sight thank you for the help! I just order the peep sight for it tonight but now I need a spring to complete the restoration on the site. Any ideas where I might be able to find it? I would hate to buy the entire sight since its really expensive.

Did anyone watch the video from the website? This guy did everything wrong! It was late at night, he opened the door for a stranger and he had crappy locks on the door. Just some simple basic awarenes would of helped him more than a stun gun. Also my brother and I were talking about this and he thought its a bad idea since you are holding a stun gun right up to your head every time you answer the phone. A simple slip of the finger....zap...and he will be forgetting his name for a good ten mins. This is not a good idea a seperate stun gun is a much better choice.

I have a few more pics but I am unsure how to upload them. The part number is S-130. Any help would be apprecitated.

Hello Everyone, I am looking for a vintage Marlin 22 peep sight for my dad's 22 which was passed down from my grandfather. We recently had the metal re-blued and it looks amazing but in order to to close to origional as possible I would like to find the origional factory site or find the peep sight and spring for the sight which is missing. Thank you for any help you can provide. Below is some images of the sight I am looking for. Our local gunsmith had one in stock but it was in his personal collection and not for sale. Thank you for your help!

LOL! I was really just wondering if electronics could be effected inside the house if a large solar flare was to hit and not just electronics connected to the walls. Could it impact battery operated devices?

Oh I remember that, the water still had a yellow color...Nasty! Perhaps put it through once more..lol!

Here is an article regarding the flare http://www.latimes.com/news/nation/nationnow/la-na-nn-solar-flare-20120712,0,6885961.story

Hi Everyone, I just saw an article today that the sun just emitted a huge solar flare what will strike earth in a few days. Does anyone know the worst that can happen with these large flares? If one large enough were to ever hit the earth would it wipe out electronics outside alone or would it impact indoor electronics run on batteries? It just made me curious.

I went to a local gun shop today to pick up my fathers gun which we had blued for fathers day. While I was there I spoke with the owner who is a fantasic gun smith. He told me a few things that can cause a short stroke in an AR. One thing was the gas key screws getting loose and this can happen after staking. Other issues include the buffer not being turned the right direction, bad buffer tube springs, to much oil and weak gas seals on the bolt. I also asked about the gas tube and cleaning it and he advised me never to stick anything is the gas tube since it gets obstructed and would require a large dissassembly to fix this issue. I am going to check out the gun shortly to see what's going on. Thank you for your help everyone!

I have an s&w m&P Optics Ready Compliant. Its a 16" barrel without a comp and has a 1/9" twist. The gas system is a standard ar gas system not sure about the buffer and springs its stock with the gun. I did however change the stock a while back to an ACE Skeleton Entry stock. The bolt is a standard s&w bolt. I am using capped PMAGS and PMC X-TAX 62 grain Green Tip. I have shot many rounds in its current config without and it functioned awesome. Not sure what happed when I cleaned it. I will check the gas key screws to make sure they are tight, where are they located?

99% of the time I shoot PMC x-tac. The issue actually started right after I cleaned it. I am going to clean it again and inspect the parts.

I was actually using 5.56 PCM 62 grain xtac ammo and still had a few of these issues. Could to much oil cause this issue?

Thank you for the help, the gun chambers and fires but when the round ejects the next round gets stuck inside the magazine with the bolt face on top mangling the next round. Anyone have any ideas? It seemed to do this a lot with remmington ammo but when I switched to my usual PMC X-tac it only did it twice. The mags are good since they are pmags and shoot great. I thinks its an issue with my gun it shot wonderful up to this point.

Hello Everyone, Does anyone know the best way to clean out a gas tube on an ar15? I have been experiencing some feeding issues lately where one round ejects gets stuck loading the second round. It sticks so bad that I have to pull on the charging handle really hard, ejecting the round which then crimps the case destroying the bullet.

Hello, I have been noticing a lot more robberies around my neighborhood so I thought it might be a good idea to get a home security system. I have heard both positive and negative things about them. Does anyone know any good motitoring companies and one that is not to expensive? Thank you for your help!

Hello, I was wondering if anyone in South Jersey sells 7.62x54 ammo in non-corrosive for a good price. Online prices are running about $10.50-$11 per box. Thank you for your help!

Krdshrk, How thick is the steel on that safe? Are the deadbolts strong?

I was looking at the Barska safes but are they good quality? I have also been looking at the Gunvaults but many of them on Amazon were getting bad reviews but they do seem popular. I look look at the model you posted to see if it will work well. Thank you for your recommendations! Does anyone know about the Canon H1 safes?

Hello Everyone, I am in the market for a good quality pistol safe for my bedroom and was wondering if anyone has any suggestions. I am looking for a larger safe since it needs to support two full size pistols with a weapon lights and mags. Any help would be apprecitated!

Hi Everyone, My brother resently purchased a Ruger Blackhawk with a 10.5" barrel and it has a scope. The pistol is awesome but the only problem is that we now need a very large pistol case to fit it. Does anyone have any recommendations for a good quality case?

I agree with Krdshrk that FMJ is best for target shooting. FMJ is a lead core with a copper casing. They are usually heavier than FMJ and the bullets are usually pointed in modern rifle calibers making it more aerodynamic. The grain of the bullet is the overall weight of the bullet. The heavier the bullet the more resistant it will be to wind shift making it more accurate over longer distances. The problem with heavier grain bullets is that it will drop quicker than a lower grain bullet. The key is to view the distance and terrain then choose the best load to hit the target. According to what I have found some guns like certain ammo brands and grains better than others. Your best bet will be to first buy a few boxes of different types of ammo. Then site them in short range then test it over long distances to see what types of groups you get.

Maybe its the wild New Jersey Guinea Pig!

The PLR-16 is banned? I saw these for sale in NJ a few years ago.

This could be what happened last night. Apparently a join base of McGuire in Lakehurst were shooting artillary as a training exercise. http://www.nj.com/south/index.ssf/2012/06/ground_shaking_loud_noise_caus.html

Maybe Eds Gun Shop in Deptford,NJ can do it for you. They have been very busy so I am unsure about turn around time but they are very nice people to deal with. Their phone number is (856) 227-2383 I hope this helps!