Everything posted by Turbotezza
-
AR Pistols Legal in NJ?
The Bushmaster Type 97 is supposed to weigh in at 46oz empty. http://www.bushmaster.com/catalog_carbon15_AZ-C15P97.asp
- +1 Destinydog
-
AR Pistols Legal in NJ?
You'll need a polymer/carbon upper too to make the weight. Perhaps this link would be helpful to those potential builders. https://docs.google....MVE&hl=en#gid=0
-
on hold
You don't 'need' another Garand. ;P
-
Ok car guys, need some help
It seems to me all these problems could have been caused by too high a voltage in the system. If the regulator is indeed kaput, try disconnecting the alternator, run the vehicle just on the battery and see if it throws the same codes.
-
Pictures of AK's
My Hungarian SA85. Ironwood furniture with modified pistol grip to take the steel grip cap. Red Star trigger group, Krebs rail
-
Pictures of AK's
Make sure that both legs of the spring are hooked on the trigger bar, if one slips off the problem you describe could happen.
-
Anybody have any experience with the PWS brand?
Yep. They're great for cold weather shooting!
-
AR Gas Tube Cleaning?
To me it sounds that he has a marginally undergassed and short stroking, which is proably why is 5.56 ammo works better than the Rem 223. Going to lighter springs/buffer and a larger gas port will help his situation. Some oil is good, but overlubing just blows oil in your face when you start shooting.
-
AR Gas Tube Cleaning?
Your're probably just undergassed. As others have mentioned, it is unlikely that your gas tube is fouled as 10,000 psi of gas pressure passing through won't leave built up carbon crud in there. I'm quite sure that if you use 5.56mm NATO ammo, you'll won't have a problem with cycling. To help with your issues, you could; 1) A good general clean of the BCG. 2) Use better ammo. 3) Lighter(lower power) buffer spring 4) Lighter hammer spring 5) Lighter buffer Of course, you could also enlarge the gas port in the barrel.
-
Best way to make this work... (trying to sell an Aimpoint)
If you can't trade it in, I'd be willing to buy it off you.
-
Best way to make this work... (trying to sell an Aimpoint)
I could use a Micro.
-
NJ Mayor: says he'll give you $1,000 to turn in your gun owning neighbors
It's "Fewer" errors Maks, not "Less".
-
Pin and weld brake hole placement question
He may have an aluminum one from somewhere. Unlikely, but not entirely impossible.
-
Unions fill deptford mall
Unfortunately, it seems that many unions and companies have a similar relationship to the current set of Democrats and Republicans
-
Pin and weld brake hole placement question
It doesn't matter.
-
NJ Mayor: says he'll give you $1,000 to turn in your gun owning neighbors
If your neighbors are the type to intentionally break the law and nobody in their right mind would turn them in for $1k.
-
Unions fill deptford mall
Do the CEO's in unionised companies make less because of the efforts of the union?
-
WTS: AR15 barrels.
20" barrel is sold!
- +1 mintbore
-
AR pics, lets see'um!
Interesting lower receiver extension. No gas tube. Very small barrel nut/forearm. 22LR perhaps?
-
Tritium front post for AR
I don't think there is a 360 tritium for the post.
-
~11 hour forum outage?
Wooo. Back again (again) from the dead!
-
Tritium front post for AR
Troy Industries is having a 20% off July 4th sale now.
-
WTS: AR15 barrels.
No probs. AR chamber extention journals are like an inch or so in diameter, so most comps short of JP howitzers or those used in 3 gun will ususlly fit.