Skip to content
View in the app

A better way to browse. Learn more.

New Jersey Gun Forums

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

T Bill

Members
  • Joined

  • Last visited

Everything posted by T Bill

  1. Based on the inside of the safe, one down, sixty-three to go.
  2. FAMAS does use 5.56. OK, OK update first generation does uses a specialized version of 5.56 only made in France, a steel cased round. Second generation should have been standard brass 5.56.
  3. http://njgunforums.com/forum/index.php/topic/74499-official-ar-500-buy-thread-plates-are-in/
  4. Pole dancer with boobs and a brain? Naw, anatomically impossible. Everybody knows they only have one brain cell more that a horse so they don't poop in the parade.
  5. Agree with 67gtonut, Ruger LC9s Pro. Handled one this past weekend, very nice. If it wasn't for NJ's stupid P2P, I would have one already.
  6. The 380 COAL max is .980, so the FMJs are at their max already. Do you have a 100 FMJ head to measure the length? Measure the FP, what is the length here? Difference will give you an idea of the seating depth of each in the case. If the seating depth is near the same in the case, pressures will not change that much. It is the seating depth of the head in the case that determines the pressure curve, not the COAL provided the head does not touch the lands in the barrel. Accuracy maybe affected by how much freebore there is from the bullet head to the barrel lands.
  7. Liberty Discount Fuel, a COD oil company, used them for years, serving Warren Sussex Morris Hunterdon in NJ and Pike Northampton Monroe and Lehigh in PA. Today's price $2.219.
  8. Army issue 230FMJ is full power at 885FPS. That's a PF of 203. Head is .68 long and COAL is 1.275. That's known as 'hardball' loads. Nobody I know shoots 230FMJ much over 170-175 PF or about 775 FPS unless shooting hardball matches which I have not seen in years. Too much wear and tear on the gun. Have you chronographed your loads? Too fast a speed or too much crimp causes plating separation with plated bullets. Some are switching to coated, less problems overall. Most manufacturers of plated say lead load data or mid range jacketed speeds. I would stick to lead speeds and reap the benefit of the plating on barrel fouling. Diameter will make a difference also. Some prefer .451 over .452. This will change the pressure curve also. Ibejiheads is a local vendor used by a lot on the local uspsa/idpa circuit. www.ibejiheads.com
  9. Let the holiday shopping dust settle a little bit and keep an eye on the major players. I would suspect really good offers are just around the corner.
  10. Looks good to me. 230FMJ COAL 1.259 and 4.3 BE is not a hammer load by any means. Hornady 9th has 230LRN at 1.21 and starting load of 4.4 BE. Just don't roll crimp or taper crimp to hard, round needs case mouth for head spacing. Just enough to eliminate the case bell. Older dies will have a roll crimp feature beyond the taper that is not needed for this type of round. Used for other 45 caliber rimmed cartridges.
  11. Only a chronograph can tell you FPS. Are the fired cases showing any pressure signs? Flattened primers? Could be the type of powder used in the reloads. WWB is not know for its quality.
  12. And this is surprising because?
  13. First, Hodgdon Clays in made is Australia and that plant had a fire. Clays production has been shutdown for the last year at least. Suppose to come back online sometime this year. Look to Hodgdon TiteGroup, or IMR 700-X as possible substitutes, YMMV. Second, most shotgun powders work well in pistol calibers. Because of that, good luck finding anything that can be used in shotshells. Take what you can get and use it wisely. Hopefully this mess will ease in 2015.
  14. Pennsylvania Firearm Dealers and County Sheriffs access the PICS program through a toll free telephone number, which is available for service from 8:00 a.m. until 10:00 p.m. seven days a week, including holidays. http://www.psp.pa.gov/firearms-information/Pages/Pennsylvania-Instant-Checks-System---PICS.aspx
  15. 1911 45ACP is one of the most forgiving handgun rounds on the planet. It loves just about everything. Big dumb slow and happy is how I describe 45ACP. Load some with a fast burning powder and some with a slow burning powder. Shoot them both on the same day. Decide if you like a snappy round (fast powder), or a big push (slow powder) type of recoil. Whatever allows you to get back on target sooner. After your decision, use that powder to max out your load. Rarely do you have to load over 170PF. Overworking brass with hammer ammo just plain costs more for little or no benefit. Make a charge ladder and work up it till you get where you are comfortable with it and have the accuracy and PF you desire. One hole pistol round accuracy is as elusive as unicorns, do not expect it or try to achieve it. Now you have your USPSA load. Practice Practice Practise. Other sports use different loads. For Bullseye you slow it down to where the bullet only travels fast enough to be accurate to reach the target, nothing more. In fact the recoil spring will be reduced to allow the slide to function. That is why some shooters have a BE gun and a USPSA gun. Different disciplines. Bowling pin shoots, different type of heads, almost saw tooth looking and full power loads to clear the table as fast as possible. Experience and time will tell you what you need to load. Start with the basic two USPSA or IDPA, and Bullseye. Master these and the others disciplines will become second nature. Good Shooting.
  16. DI (6920) vs piston (6940).
  17. Send an email about this to Anthony at GFH. Maybe get Nappen to comment on GFH Radio when he's on. Interesting situation.
  18. Buffer tubes come in what is know as mil spec or commercial. Difference is what grade aluminum they are made of and this affects their outside diameter, with commercial being slightly larger than mil spec. It is important when ordering a stock to know what kind of tube you have. I would pick your stock style first see what type of tube it takes and go from there.
  19. Back at ya and to everyone here, may you have "life, liberty, and the pursuit of happiness." Let's kick ass this year. Time to show some people the door!
  20. No it is not. Machined to block the tigger shoe in only one direction. Tactical Innovations markets a replacement part for left hand shooters however.
  21. Use that AA#2 in the 45ACP, great use for that. I used to prefer AA powders for pistol. Used #2, #5, #7 all the time. Till things settle down with the powder supply use that. I went from AA#2 to W231 because I could not get AA#2 anymore. Got some AA#7 left and that is it. Even the W231 I have is just about gone. Used to load 200SWCL over 5.5 of AA#2 YMMV. Burn rate AA#2 is very close to Titegroup.
  22. Don't be surprised if they run you through the whole process again, application (with chg of address marked), nuthouse check, Criminal backround check (done online now), and surprise, surprise fingerprints. Do they have too? NO! But it's up to the NJSP rules they follow not what's required by law. Application can be downloaded off NJSP website along with nuthouse forms. http://www.njsp.org/about/firearms.html STS-033 and STS-066.
  23. 21 Miles and a half hour west of Washington. Remember to go around the side of the building and at least peak in at the firing range, worth a look
  24. OK so we have two areas you are interested in, target shooting and self defense. They are two different disciplines that don't really go together well, but we can adapt to possibly come to a happy middle of the road. 14.5" barrels with "light" contours do not lend to accurate target shooting, their purpose is in a CBQ or self defense environment, quick fast target acquisition. Target shooting is best done with a 20" or longer barrel with a heavier profile for dead on accuracy. Best blend of these two disciplines would put you in the 16 to 18 in barrel length, 1:8 twist and possibly a SS barrel. To be honest will you I would look at 3 gun type uppers as the best solution to a multipurpose upper. Chances of you ever using that upper in a self defense solution in NJ are two, none and none at all. Go with the above suggestion you won't be disappointed.
  25. I reload x39 ammo in brass cases only. First off, part of the problem with steel cases are they are not flexible enough to make a good seal in the chamber, hence dirty chambers, clogged extractors, etc. Second, reloading steel that has been fired just does not fit well into my karma. Got to get a lot of splits out of them, not good. Third, I like to customize my rounds. I have been loading 110 grain to 150 grain 308 diameter heads with great success. I do not use mil surp rifles so that is not an issue for me. Working the steel cases, casting lead, making gas checks, "gluing" the primers even before assembling the round is not worth the time to me. I would have to agree that without a specific desire to obtain a special loading, and using foreign mil surp rifles that loading x39 is not worth it. I would pass also.

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.