Everything posted by T Bill
-
E-mail from Cory Booker
He's telling you to vote for Bell in November, can't you read between the lines?
-
Goddamnit, HKCS...
Here ya. I ordered and paid for a part that was in stock a month ago (after waiting for a year for it to be in stock). Got the balance of the order last week. Today I get notice from CC of a credit 2B posted. From who? Well, my backordered part is now "discontinued". Thankx for nothing. One whole part of the project now down the drain as this is the key part. No respect I tell ya, no respect at all.
-
Super Colibri for a rat
Let's see 20 grain bullet moving at 500 FPS muzzle velocity. At thirty feet I would say it is very capable of being a deadly projectile no matter what.
-
DMV Checkpoints? What?
I used to be on Route 59 in Rockland County, NY for business every weekday. Clarkstown PD has a car equipped with a plate reader that does it in both directions at the same time. Two pull over locations down the road in each direction. No less than 5 cars in each no matter when I went past. They call it effective traffic management.
-
Winchester 94 AE "Trapper" Lever-Action, 357 Magnum
Made from 1983 on I believe. More than likely from the nineties, was a big push selling them then. Wood looks good. For me $875 is way up there in price. I, myself, would pass on this one. A Henry Big Boy in the same caliber lists for $900 and is a much nicer rifle.
-
Selling used and taking it in the tush
Private sales are not a big deal. You are in control, not the buyer. List it, FID, DL, and COE and its a done deal. Stop overthinking this. It's costing you money! Odds that in the future a LEO will knock on your door are beyond remote at best. You saw his FID and DL, have your copy of the COE, your done. No different than a FFL who books in a transaction. Dealers telling you it's worth less than half without an evaluation and NRA grading are lying to you! Stay out of those places, they are not treating you fairly, period. There are good dealers out there, ask around and find them.
-
Hornady or Lee
T&T Reloading on Sullivan Trail Across from the Church before Stockertown. But you have to go there. Tony is Tony. If you know him, you'll know what I am saying. Does Sarco have any on the shelf? Remember W296 is the same thing.
-
I hate BEARS!!!!
Me. Lottery for permits start 9/15. Zone 2 first, Zone 1 second. Only so I can start the hunt in my backyard
-
Baby Desert Eagle II, anyone?
I guess it's what you like. I know when you break it completely down for a good cleaning, it is nasty to re-assemble. Takes more than two hands without special tools.
-
I hate BEARS!!!!
Not here when I moved here in 1982. Locals said they don't see bears. They we had that drought back in the mid a 80's and that allowed them to migrate across the Delaware to feed on the shrubs on the Jersey side. They have been here ever since getting larger in numbers. Becareful they're getting closer every day. The critters are reclaiming NJ.
-
I hate BEARS!!!!
Know how you feel. My dog can smell them before I can see them. Have to keep her in the fenced-in area of the yard all the time anymore. They are worse this year than ever. Used to have a dozen or so sightings a year. This year at least once a week, and not the same bear. Some helpful encourgement to keep them on the move and waiting for hunting season. I figure this may be the year for that new rug. Never thought I would hunt bear in NJ.
-
Snow Blower Recommendations
I have a friend in the northwoods of Mass. Has a three stage cub cadet 26" he picked up on snow blowers direct Swears its the best he has even own.
-
Yet another help with NJ gun law question!
Gotta to with PK90 on this one.
-
Target AR15 build
It was close to a buck and a half before the big hoopla. Might be about the same now. Give him a call. Stripped that is.
-
What do I need for reloading shot-shells
Different press completely. Look at a low end MEC press if your interested. While similar in nature, a different beast. If you can reload metallic cartridges you can with a little research and hands on master shotshell reloading. Time to hit the books again to master this phase.
-
calling all 223 experts
In 223 55 grain FMJ, HP, SP can all be loaded with the same charge without much effect in performance. I find the ball powders measure best for this application, however H4895 has been used in 223 reloads for a long time with no problems.
-
Hornady or Lee
I use Hornady equipment for my progressive reloading. LNL is a good press. Has is quirks, just as all presses do. I use a case feeder system for all brass, but a home made bullet feeder for handgun loads. Rifle heads are set by hand. There is a comparison done by someone on the plus and minus of the three major progressive presses. I'll attach it here when I find it. It's a good read. Major Pistol shooter extoll the qualities of the Dillon 850. I have no experience with that press. Started with a Hornady Projector over 25 years ago and it still is running today. Added the LNL 2 years ago and it is going great. I use a RCBS Rockchucker for single state loading that I picked up at a yard sale years ago. Works great for small batches of things, and a MEC for shotgun shells. dillonLeeHornadyComparison.pdf
-
M&P 15-22
NOPE! Needs permanent mount of compensator and pinned stock. Keep an eye out for Tanner's Gun Shop in PA. He's always selling them cheap and usually has NJ compliant models as well.
-
calling all 223 experts
55FMJ w/c Hornady heads load to 2.20" (Hornady spec). SAAMI spec trim length is 1.740 to 1.760. Seat it to the cannelure you will be fine. I always seat to the cannelure 25 grains W748 and Winnie primers, great middle of the road load. YMMV FYI, middle of the road loads save brass. Find the least amount of powder to give you the best accuracy. That groundhog won't know if its fiying 100-200 fps or so less than max and you'll get more reloads out of the brass before you cut it down for 300 Blackout.
-
New Holster for USPSA and IDPA
After a long hiatus from the shooting game I have decided that I could get back into it on the senior circuit. With all the new gear on the market I feel I want to get a new rig for the 1911. This rig would be both for IDPA and USPSA SS and L-10. I prefer a Blade Tech possibly a Revolution with up to three double mag holders. Question is what fastening system are most people running. Tek-Lok, Stingray, duty loop or others? I see the IDPA Revolution Pack is available, but is Stingray the best mounting option? Your thoughts appreciated.
- Ruger lc9 s
-
Any members of cherry ridge interested in IDPA?
Best of luck with your endeavor.
-
How to reload .38 SPL (Satire)
Satire, with a bunch of truth mixed in. I have seen powder sold/traded in milk jugs. Cases with splits reloaded. "It'll get two maybe three light loads yet, don't worry about it". Primers removed in the weirdest ways. Yes using a nail set. Clean, resize brass, why? Only going to shoot it again. Bullets cast in Lee molds with what I would call "Mystery Metal" from who knows where. I have been at Camp Perry and at the end of the day, seen reloaders picking up heads to be reswaged and loaded for "practice" loads. Berdan cases "converted" into Boxer cases cause the brass was "free". Through it all you can say what you want, youngin' today are no where near the level of 'experience' of previous reloaders. I have witnessed Bullseye scores you could honestly say were never obtainable with that type of ammo. Who knew? I would not want to be on the wrong side of these guys. True innovative geniuses. Kinda like you can fix anything with a hammer.
-
Best +2 extension for the 870, also question about shotgun weight
I use Nordic Tactical aftermarket parts. Very pleased with fit, finish, and practicality. The MXT magazine extension, follower, and barrel clamp all work perfectly. Why only +2? Pumps are not subject to round restriction, except when hunting (2+1). Are we talking about and 18" HD setup? Sporting Clays are best shot with 30" barrels. Some use 28" or 32" Trap shooters use 30", sometimes see 32"-34". Barrel weight vs length is usually not that much. Balance is key. A longer length will stop 'squirrely' movement. OK, I see 18.5" barrel length in your post, so +2 is right. I use a +3 on one gun because the extension sticks out about one inch longer than the barrel. With careful spring trimming, gives me and additional two rounds over the +2 for +4.
-
I found a reason to visit Minnesota
Check GovLiq, New Castle, DE has some M101A2, and M116 up for sale starting 9/02/14. Or check on Steel Solders. Have not been many M100/416s around for a while.