Everything posted by T Bill
-
Recommendation on reloading rifles dies brands for a Dillon 550B
Had an 1895SS that I sold to another forum member here. Sold off my lever "hammer" guns (45-70, 35Rem) as I just didn't use them that much anymore. Seem to stay between ,22 and ,30 size calibers anymore.
-
Slide fire stocks nj legal
Magpul PRS is not the first stock with adjustable comb and length of pull. These types of adjustable stocks have been used on rifles and shotguns in this state for years. No one has questioned them yet. I have seen many used at national match type courses of fire and nobody blinks an eye, because the stock is "fixed" and you are only adjusting the length of pull and the comb.
-
Recommendation on reloading rifles dies brands for a Dillon 550B
May have a set of Hornady dies in 45-70 on the bench I don't use anymore. If I find them and any heads I send you a PM. Don't need two separate stages to seat and crimp 45-70s as you need to "roll" the case mouth into the cannelure to grip the bullet. This round loads and performs like a giant 38 special or 357 round. You will need to do this to get any accuracy in the load. Caution on what firearms you will use it in. There are different load data for old firearms vs marlins vs ruger #1s. Be in touch.
-
Buckmark Hunter 25 yard "paper punching" optic
Something in the open styling like the Fastfire. Optics get "heavy" on top of pistols, pays to go with lightest that gets the job done. In the 2oz area is optimum.
-
Rimfire steel pistol ideas
Ruger 22/45 Lite has 4.4 barrel length. 23 oz weight, with a Volquartzen accurizing kit, dropping the magazine disconnect and loaded chamber indicator, will make this into a nice tack driving comp gun. Mods can all be done whenever time and funds allow. Add bases to magazines, include optic of your choice, can't ask for much more. Of couse you could go the 1911-22LR route as well. Lots of options here as well. Mark II Gov't is sweet with the Volquartsen add ons, the 22/45 5.5" bull is even sweeter with the above enhancements. Would like to try a SR-22 though, but heard trigger is a little rough.
-
Colt 6920 for $895
Yes it is.
-
The Obsessive lawn care neighbor
The Postman always rings twice.
-
Can I own a compliant 6920 in Jersey?
2013 Production models are marked "M4 Carbine"
-
Gun Control Politics To Choose LE Duty Weapons?
Vendors all submit bids, but none answer those questions. Now what Fulop? What an political asshat!
-
Optic for my rifle, looking for suggestions
Nikon has one that is very nice. P-300 BLK 2-7x32 BDC
-
Let's plan an EFGA meet-up...
New EFGA rules. You can bring up to 3 guests, only one can shoot at a time, other two must stand aside. You must have a guest pass, course. And yes, must be in the booth you are using. Implemented recently, like over the summer or early this fall. Don't remember just when.
-
Progressive Press Dies
Checks to see if powder in case is within limits. Hornady die is visual, you must look at the die at the top of the upstroke to see the "safe" ring. Not sure how others work. Personally, I reloaded for 2o years without such a die being available and never had a problem on my old Hornady Projector (which I still use today). I put one in the Hornady LNL and I am debating taking in out. I use mostly ball powders and never had a problem with the powder drop as long as you keep it at least 1/3 full while reloading. I still check the charge drop on the scale every other primer reload and again is always within limits. I have had more problems with the seating die gumming up with lead bullets and changing the seating depth. I really prefer the taper crimp die, so I will probably change to: 1. Deprime / Resize / primer on down stroke 2. Flair and Powder drop 3. Auto bullet drop 4. Seat 5. Taper crimp If that presents a problem then I'll change Stage 3 back to Powder check, Stage 4 to bullet drop, and Stage 5 to seat and crimp eliminating the taper crimp die.
-
AR Punch Set Recommendation
Any quality punch set will do. The pins on the lower and the two pins on the upper are of a standard variety and work well with common quality tools.
-
Looking to build an AR-15 .223
Ditto on the lower. Find a lower you like. To me, all metal lowers are beginning to look the same (PSA, Spikes, Aero, etc). PSA has some find deals on Blem Lowers. Not one have I heard, could you find the blem. The blem is cosmetic only. Building this up, I would use a LPK that either has no Fire Control Group or a two stage Fire Control Group (ala RRA, or someone else). If you choose no FCG, then a trigger of your choice is needed here. Something compatable to long range shooting. To this add your grip of choice and your stock of choice. Remember you said long range shooting, so your stock choice is important here. An A2 style variant is what I am thinking. Now you have a lower geared to LR shooting. Upper can then be configured the way you like. For LRS, I would consider a Stainless heavy or bull barrel 18" or longer. This is not a $600 build. The upper alone without a scope could cost that much, even on the decent low price end. And you will have close to $300 or more in the lower already. Me thinks you need to research just how much each type of shooting you will do and adjust accordingly. Good Luck.................
-
Voting with my feet, sad but happy
Good luck in your endeavor. I am just off the Route 80 corridor near the PA border. If I knew then, what I know now, I would not have stopped where I did. If your going to the Poconos shoot me a PM, if you have any questions. Spend a lot a time there.
-
Complete upper so many choices!
JSE Surplus will be having a bunch of uppers on Black Friday also. They use primarily Wilson Arms barrels.
-
Anyone convert their Carbine to .300BLK and load for it?
I've loaded 150gr pills into x39 back in the 90's. Was a fantastic deer hunting round as I have a bolt action. But, over time I could not longer justify owning SKSs. The triggers suck, accuracy is mediocre at best and I just tired of them. Even had a "carbine SKS", didn't like the performance of that either. Ruger Mini-30 shot much better. With reloading costs about the same, I like the 300BLK better. The x39 is dying on the vine. When "cheap" import ammo dries up it will cost just the same to feed that import. It wouldn't surprise me a bit when Obama bans imported ammo. Hell, Clinton turned the spigot off on us in the 90's with cheap Chinese ammo. Used to by that crap from Norinco for like $75 for a 1200 round case for all day range fodder. 300BLK made from OF 223/5.56 cases and common 30 caliber pills, what else could you ask for?
-
Anyone convert their Carbine to .300BLK and load for it?
Cause next to a 300BLK, 7.62x39 sucks! So many more choices of speed and pills sizes. Its like a mini '06.
-
AR Meltdown Support Group.
You will not find many target crown barrels that are not SS and either bull or heavyweight. Any reason a SS barrel would not work? Inherrently more accurate the chrome lined and I doubt you could wear it out. That may improve your search a little. 18" are not that common right now either. Pipeline geared up for 16"ers, maybe time and demand will improve supply.
-
AR Build Questions, Guidelines, and Suggestions
Charred oak of course.
-
AR Build Questions, Guidelines, and Suggestions
Geissle. GeissleTriggerSummarySheets.pdf
-
Shotgun Shootout! November 17th at Clinton WMA
Try 2,000+ That's why I got another new Red Label. They work for me at half the price!
-
Anyone running a BAD lever
Me too! Everything but the NM. Tried the Troy but didn't like it as much. Never had a problem with lockup.
-
New Remington 700
Very nice. Your knob? or aftermarket?
-
"Pink Sheet"
NO, NO. You are correct. If you moved into this state with a legally owned NJ compliant handgun, applied for, and got, a NJ FID card, who would know? Only the FFL dealer that sold it to you and the Feds, if he happen to go out of business and turned his paperwork in. (OK).