Everything posted by T Bill
-
CCW Training Debate
Texas has a practical. But how one reacts under stress is completely different from shooting at a bullseye. License to own is a problem for me, government lists. PA does not have a training requirement, and I do not here about the wild wild west scenario, either. Georgia was one of the first to aithorize CCW way back and I think the mere fact that someone maybe carrying changes the odds on opportunistic possibilities. Here in NJ we are just crime stats waiting to happen.
-
Feb. 25 Republican Debate
Whoever winds up as POTUS will not act say or do as they campaign today. None has ever in the past, nor will any in the future. Truth be told we will get screwed no matter how you look at it. The question is how bad. So sit back enjoy the show, do your part when the time comes (primary and general) and hope for the best. I am more worried on how to keep Hitlary off the ballot, than who the Republicans run. Unless something drastically changes Bloomturd is out. He never plays unless he's certain he will win, and nobody west of the Hudson River likes him. He may buy the office, but I doubt he could stomach that. We need to focus on more than the POTUS race. We need to hedge our bets and keep the Senate and House red. The entire House is up for election and enough seats in the Senate are in play to change change from red to blue. Remember Reed changed the rules and only a simple majority is needed for passage of bills. Christie endorsed Trump today, so I guess that's where he feels his next meal ticket is coming from. Trump gets elected, Christie goes to DC and we the 2A crowd in NJ will prepare for BOHICA.
-
Glock 23
Glock stock is a very good barrel. Glock barrels prefer copper bullets due to type of rifling. I have an aftermarket for lead. For conversion, I use the Lone Wolf, works fine. I would not worry about grouping. A little reading. http://www.guns.com/review/2015/09/14/dueling-barrels-the-best-glock-conversion-barrels/
-
Glock 23
G23 with 9mm and AA 22LR converions are the way to go. Customize the trigger, grip, etc, to your liking and it's like having 3 custom guns. Awesome way to go.
-
Need Help, AR Timing is Off
- CCW Training Debate
Thank You, I gave up trying to debate him. Very closed mind. Not worth the effort.- First reloaded 38 special rounds
Use a kinetic bullet puller for quick pulls of pistol brass.- First reloaded 38 special rounds
Get a case gauge takes all the guess work out. http://www.midwayusa.com/product/645976/le-wilson-max-cartridge-gage-38-special- .45 ACP question
Talking stock firearms with hard ball ammo, HK-45, FNP45. I find my Colt NM 1911 softer than my G21G4. Softness as a factor of perceived recoil is different from shooter to shooter.- Burger King hot dogs
- "Irish democracy"
We already have that too, it's call voting, but most are too lazy to exercise that right as well.- .22LR $0.07/rd @ Cabelas No Limits!
She gone!- "Irish democracy"
Unless you haven't noticed, Irish Democracy has been here since Florio started that ban crap back in the nineties. I did not see a line to surrender firearms the last time around and do not expect to see it again. The same is true for drugs, pesticides, and various other NJ condemned items. Out of sight, out of mind.- How many of my friends here buy firewood?
Wood should be sold by the cord. A cord is 4 X 8 X 4 feet or 128 cubic feet of wood in the rounds, not split yet. Species will give you your BTUs with hardwoods like hickory, oak, and maple having the highest. http://www.woodheat.org/cord-wood.html Good reading here.- Tactical Training Center Range Flemington, NJ
Because they all know all you can do is run to the end of your chain and bark!- Are most internet gun guys full of $hit?
Well to qualify to become a NRA pistol instructor you must shoot a group with an ES of six inches at 15 yards as one step in the qualification. A timed and rapid fire target in Bullseye has a 5.5" bullseye target.at 25 yards. So, I would say with a lot of practice, it is very possible. Lot's of other factors to consider in such a broad statement.- Gas Block Install Question: Loctite - Yes or No?
Loctite not necessary, just tighten them up and go. Heat of the barrel radiating would probably break down blue Loctite anyway.- Ugh... Anyone have problems with Herter's 12ga?
This issue has appeared before at NJGF shoots at the Clinton range. The base is stamped out of a non brass metal that seems to have problems with certain shotguns. Now shotgun shells are acting just like 22LR. Some work well some don't.- Sarco will always surprise me
There was always scuddlebutt how the 'back door' was never really that secure. Great place to get stuff back in the real surplus days. Flipping through the Shotguns News to see what was available. Now, not so good.- 277 wolverine
It has several pluses over 300BLK, 6.8. and the 30RemAR. Another reuse of the 223/556 cartridge. That I like because brass would be easy to reform. Looking at the 25-45 Sharps as well.- A2955 - amends CCW
Because Sweeney has already publicly stated " Not on his watch!". He needs the other Dems to be the next Governor.- Castle Nut Won't Budge - Suggestions? (Update - The Nut Finally Budged)
i don't think so. To pointed to get enough heat across nut. Hair dryer is best. Nothing there to damage anyway, until you get to about 1100F- Touching veteran video
Did you notice the NRA sweatshirt on the vet? One can only hope this video is true. We the American people need to demand better treatment of our veterans. Current care is disgusting, degrading, and politicians should be held responsible. These citizens stepped up to the plate and gave more than anyone else. They cashed the checks the politicians wrote. Americans first, rest of the world afterwards. Sorry, for the rant, somethings to me hit to the core.- Who makes syrup?
- Has Any Installed a Barrel Using a Magpul BEV Block?
I don't feel you will have that much of a problem fitting the barrel to the upper receiver. Heating the upper is the way to go. I have seated many a barrel to the upper and only a few times did I have to heat the upper for a little more room, never have I chilled a barrel. A little moly and some heat and it will slide right in. Do not go pounding things, bad things can happen. If you have to, you can use a Scotch Brite pad on the receiver and barrel extension to slick things up and remove any burr, etc. Remember to tighten and loosen the barrel nut about three times to have the barrel nut and threads pre-stretch, to stop and possibility of the barrel nut loosening up after you start shooting it (35-80 foot lbs). Make sure your upper receiver barrel face where the barrel extension seats down to is square before mounting the barrel. Good Luck. - CCW Training Debate
Account
Navigation
Search
Configure browser push notifications
Chrome (Android)
- Tap the lock icon next to the address bar.
- Tap Permissions → Notifications.
- Adjust your preference.
Chrome (Desktop)
- Click the padlock icon in the address bar.
- Select Site settings.
- Find Notifications and adjust your preference.
Safari (iOS 16.4+)
- Ensure the site is installed via Add to Home Screen.
- Open Settings App → Notifications.
- Find your app name and adjust your preference.
Safari (macOS)
- Go to Safari → Preferences.
- Click the Websites tab.
- Select Notifications in the sidebar.
- Find this website and adjust your preference.
Edge (Android)
- Tap the lock icon next to the address bar.
- Tap Permissions.
- Find Notifications and adjust your preference.
Edge (Desktop)
- Click the padlock icon in the address bar.
- Click Permissions for this site.
- Find Notifications and adjust your preference.
Firefox (Android)
- Go to Settings → Site permissions.
- Tap Notifications.
- Find this site in the list and adjust your preference.
Firefox (Desktop)
- Open Firefox Settings.
- Search for Notifications.
- Find this site in the list and adjust your preference.