Everything posted by T Bill
-
NJ Resident Getting a Concealed Carry Permit in PA
Kane suspension kicks in 30 days. So while she cannot/will not sign legal docs she still runs the office. If she refuses to step down, the general assembly could impeach her but that would take a long time, or the Senate can remove her by a two thirds vote. All uncharted territory. So we will see what happens. In the mean time don't go thinking any state agreement presently in force will change. Nothing changes for PA residents and they are not really concerned about us.
-
Maglite 6D in car
Still have mine in the car along with a Louisville Slugger, couple old baseballs, and an old glove. Many uses in a hurry.
-
No Permit Extension In Sayreville
Entirely up to the Chief LEO in each jurisdiction. Guess you got one that can't be bothered.
-
ammo shortage?
In my PA travels I have been getting Federal Auto Match for .0652 round and Winchester 555 for 0573 round OTD. Of course the daily limits of 1 are in effect but I'm going by couple times a week.
-
Picked up a used Beretta - stock and forearm refinish
I don't sand in the sealer, never felt it necessary. There are ways to 'sand down' the final coat of finish into a smooth satin finish that just takes a wax top coat superbly. You have to finish the finish to get there. Many ways to do it but takes a lot of time and patience. That's where the cost comes in on real fine firearms. Here's Larry Potterfield's way.
-
Picked up a used Beretta - stock and forearm refinish
Sanding sealer closes the pores of the wood. That eliminates those annoying 'sink holes' you see in the final finish. Depending on the grain of the wood I'll apply between 7 and 20 coats. A light buff up with steel wool will take the sheen off the final coat and then a buffing with gun stock wax gives you a type of low luster finish.
-
Picked up a used Beretta - stock and forearm refinish
Looks real good. Good Luck with it. I always like to find diamonds in the ruff. Problem is after I finish them someone always manages to convince me to give it to them (mostly family). I have found two coats of sanding sealer works best before staining or finial finish if not staining. I buff between each coat with steel wool to remove the roughness of the top coat. I really like TruOil for final finish applied in multiple thin coats over days using a fine cloth as an applicator.
-
Gotta have a 1911..
Here's a thread to read. https://www.1911addicts.com/threads/buyers-guide-for-all-you-1911-addicts.511/ Many years ago my 2 BIL and I purchased Colt Gold Cups, could not have been more pleased across the board. All three have functioned perfectly in all situations. I realized today's are made under different conditions so I posted this reference as food for thought. Good luck which ever direction you travel.
-
Ed's Red
Ed's Red has been a staple at Camp Perry for years. I used to use it on the Garand but over time I just got lazy and picked up what I needed now and then. There are several different formulas I tried, all seemed to work rather well. No complaints or problems. Here's a link to a list of homemade cleaners and lubricants. With all the hype today I really do not know if one is any better than the other, commercial or homemade. Some say this or that is the best, others not so much. A lot depends I guess on how often you use the firearm, what you shoot, and how often you clean it. or store it. http://www.frfrogspad.com/homemade.htm
-
Gunsmith For Stock Repair
That is definitely not a steam job. Not sure that is handled best by a smith. Best wood finish repairs I have seen on ultra fine walnut stocks have been done by fine furniture re-finisher. They have things no smith would have.
-
Rossi 92 Lever Gun Action Job
Great it turned out well. I used a this kit and put in in mine. Still having a few issues with it but no time to do it. I must have about five projects started and none finished. I really need to close them out. \
-
Free speech, well maybe not in NJ
Careful with election signs, they are PROTECTED by state law from being disturbed believe it or not! Just make sure you own the land!
-
Free speech, well maybe not in NJ
I bet it does not apply to election time and "vote for me" signs. Shame.
-
list of senators/congresspeople
Great move, thanks.
-
Gun safe humidity
Winter air at high humidity is a lot drier than summer air at low humidity. Keep it around 50%RH if at all possible. You need some humidity so wooden stocks do not dry out too much. Moisture will always go to the coldest spot. Safe golden rod keeps the temperature higher than surrounding air. Moisture then "travels" to cooler places. Get an Eva-Dry and put it in to recharge whenever the crystal color indicates it. Put a dehumidifier in the basement set at 50%RH, everything in the basement will thank you for it.
-
Henry lever-action .22
Then you may need something like this http://www.midwayusa.com/product/936878/lyman-hawkeye-shooters-diopter-optic-aid
-
Henry lever-action .22
See the page on apertures, http://www.skinnersights.com/apertures_8.html . I find it much easier to sight in, although I am used to them from shooting the NM rifle course of fire.
-
Henry lever-action .22
Get rid of that scope, get a set of skinner sights. http://www.skinnersights.com/henry_rifles_18.html
-
Small gas engine question
Have you checked the fuel pump and vacuum line?
-
FireClean is Cooking Oil
i had high hopes for this product. Early results showed it to be better at keeping things functional and easier to clean. Now, after using it on some fireams that sit in the safe I am seeing strange failures such as FTF issues. Clean and relube with some old trusted lubes find all the problems go away. This on all three types of firearms, rifle, shotgun, and pistol. I always liked Tetra products, so back to them for now. It does seem to suffer from some type of stickiness, or thickening over time that somehow effects the working of the action and the firing mechanics. Lessons learned.
-
Ruger BX-Trigger Mod for 10/22 - $60 Shipped - GrabAGun
Back in stock!
-
Ruger BX-Trigger Mod for 10/22 - $60 Shipped - GrabAGun
If you know the business end of a screwdriver, simple. I would add the bolt stop mod ( http://www.ct-precision.com) ($50) along with some polishing here and there and that 10/22 becomes a tack driver.
-
Ruger BX-Trigger Mod for 10/22 - $60 Shipped - GrabAGun
For those who wish for a better 10/22 trigger group and do not tinker with it yourself here's a pretty good deal. http://grabagun.com/review/product/list/id/197945/
-
Hornady L&L AP
Some good aftermarket parts at: http://inlinefabrication.com/
-
Expungements
Scott Bach has a lengthy note about this on another website. The reality, however, is that if the judge will wait well beyond the date set in the Order for Hearing to give the state police, etc "extra time" to see if they file an objection. Basically, the judge will not treat silence as a non-objection. The judge will wait until he receives a formal notice from the State Police and county prosecutor that "there is no objection to Mr. Smith's expungement." Once the judge sees in writing that there is no objection, he/she will then sign the Final Order of Expungement. But that's still not the end of it. I then have to send the Final Order signed by the judge to the State Police Expungement Unit AGAIN so that they can physically expunge the records from their database/files. When the State Police are done with this (usually about 6 to 8 weeks after I send them the Final Order), they then send me what I call the "blue letter" [because it is always on blue-ish paper with a NJ State Deal watermark in the center] which states that the NJ State Police have now expunged the records and cleared the criminal history file. I tell everyone not to apply for an FID card until I mail them the "blue letter" stating that the State Police have cleared their record. Anyone doing their own expungement in NJ should be aware of this, as I could easily see a situation where someone receives the Final Order from the judge and rushes out to apply for their FID, only to be denied because the charges are still on your record (they could also tack on a falsification charge as well). Although a situation like this would likely be "fixable," it would create a huge headache and further delay receiving your FID.