Everything posted by Silphidae
-
2 permits and stumped on what to get.
Do you have a role that the gun needs to fulfill? I can offer suggestions if you have a role in mind, otherwise it's mostly just subjective opinion.
-
Got my wrist breaker today!
If I ever have $1100 bucks burning a hole that's my gun. Probably more fun to watch others shoot it than shoot it myself.....definitely a novelty enjoyed amongst friends. Post a report when you finally shoot it, action pictures needed!
-
who says glocks are ugly???
Need the story on this one.......
-
who says glocks are ugly???
The slide makes it look top heavy and it rattles when I shake it. Its so ugly I covered it with skateboard tape to hide as much of it as possible........however if I had to make a choice I'd sell all my guns before getting rid of my Glock 34, including my Wilson X-Tac in an instant. Its so practical I fell in love with its looks........~6,000 rounds and not one malfunction. The holster wear just adds to its looks, some would say it's just lipstick on a pig but I'm in love so it just adds to its beauty.
-
Beware the Cheating RO
Sounds like you have a good amount of experience with the IDPA clubs down there, you should share the specifics so they can be corrected.
-
I feel like I'm losing my interest
I've changed major hobbies 3 times in my life, I always knew when I was done each one. I had 700+ gallons of reef tanks, was really into the audiophile scene and most recently shooting. It's takes 3 things to keep me interested in a hobby; 1. Mechanical/equipment interest. 2. Desire to master some sort of skill. 3. People who share my interest and who I like. I was was almost on the downswing with shooting, decided to really pursue IDPA and took a course with mike seeklander. I'm now reinvigorated and soley focused on becoming a better shooter and reaching a personal goal. Practicing dry fire 5 times a week and live fire 2 times per week and can't wait for my next match but it took this level of commitment to get back into it. Is there anything you can get excited about? If you've reached you're personal goals, don't have any interest acquiring/fixing guns and lost the overall enthusiasm it might be time for a break Or at least to find something that will get the spark going within the hobby....there are quite a few special interest groups. What's the thing that has you so excited about climbing and biking? Sometimes it takes something new to bring the sexy back.
-
$15k O/Us vs $230 870s
Now that's a real world example that makes it VERY clear to me!
-
Maximum Accuracy Reached for Glock 34?
Thanks. To close the original post I'm going to accept good enough and start loading a few thousand of these. Thanks for the comments.
-
Maximum Accuracy Reached for Glock 34?
How can you tell you need a faster powder to help obturate the bullet? Are there clear signs that you notice?
-
Maximum Accuracy Reached for Glock 34?
Dawson fiber optic, thin front. I'm close to calling this one good enough and start reloading 1,000 rounds for practice. I like reloading but hate the process of working up loads....I don't know when to call it good enough.
-
Maximum Accuracy Reached for Glock 34?
So do you think that's about the best I can get with a stock 34?
-
Maximum Accuracy Reached for Glock 34?
I'm in the process of developing an IDPA load for my G34. Currently settled with 124grain Xtreme RN bullet with 3.8 grains of Titegroup seated to 1.150 OAL. Power factor of 130 and getting ok accuracy at 15 yards, the group opens up at 25 yards. This is my latest target. The head shot is 6 rounds at 25 yards from a sandbag. 1 round was pulled obviously. I also did not have a "dot" on the head as an aiming point so that may have affected the grouping. The body under the head is 7 rounds at 15 yards from bench rest. The second body target is 14 rounds off hand at 15 yards. Should I expect better groupings from a stock G34 or am I going down the rabbit hole?
-
First reloading scare
Can you use it on a 4 stage press like a Dillon 550b? What is the concept?
-
First reloading scare
I'm in the process of loading 1200 rounds for a training I'm taking next week, 400 rounds into it and thinking another 2.5 hours and I'll be done. Great practice doing so many at one time. I'm only checking charge weight every 100 rounds and it's been spot on, titegroup meters well through the dillon. It's nice to start building that level of trust now I just need to find a more effective way to load primers......that's the slowest part of the operation.
-
First reloading scare
Excellent thought....I weighed 10 of them and they fell between 186 and 192 grains....mixed brass so that may account for the difference. The spread was too large for me to have any confidence in the 3.8 grain load.
-
TiteGroup for 45 or 9mm??
It comes off in the tumbler........I went up to 4.0 and 4.2 grains today and the spread and standard deviation really opened up. Based on my testing I'm going to stick with the 3.8 loads. Do you think there's any consequence to the scorching other than ugly brass? They are the most accurate loads I've worked up.
-
First reloading scare
Tough office day, lots of conference calls and stress as the day went on. Decided to take an hour to recharge and take my mind off of work by reloading a few rounds. 90 rounds into it I started to think about work again.......mind wandered and all of a sudden I was at the 100 round mark. I ALWAYS visually check each case for a double charge (use titegroup) and got an uncomfortable feeling that I didn't check the last few cases. I think I over reacted but I pulled 100 bullets to ensure that all was good. Ended up all was well and the 100 rounds were perfect. I'm sure I was over cautious but reinforced a few things: 1. Distracted loading is dangerous. 2. If in I doubt I will always take the cautious route. 3. I will now remove finished rounds from the collection tray every 25 or so rounds. I had 100 in the collection tray and couldn't figure out which ones were the last 10 so I had go sort through all 100. Could have saved a lot of work. 4. Free rock chucker set up as a bullet puller is NICE. I may be a touch paranoid but I'm 5k rounds into reloading and haven't had any issues and want to keep it that way. Titegroup is easy to double charge and I'd rather be safe than sorry, no point to the post but I really had my first scare.
-
TiteGroup for 45 or 9mm??
Xtreme 124gr with 3.8gr titegroup is my current idpa load with 129k power factor. It's been my go to for a while, scorches the outside of the case but runs great. Be careful for double charge, it takes up very little case volume. Never used for .45.
-
Ordering ammo from Ammoman
Eric sold the company and retired in FL, warehouse is now in Knoxville. Tried to call about picking up some x-tac this am and that's what I was told.
-
Cabelas in del grand opening
They open officially at 11am tomorrow, anyone know what the grand opening deals are?
-
safe
Stolen from the www and still working like a dream!
-
Challenge with Fiber Optic Sights - POA/POI
Thanks, created the rear sight then made a modular version of the front sight to show the differences out of layover post it notes. It's hard to describe in words so thought that may help the discussion.
-
Challenge with Fiber Optic Sights - POA/POI
I get it but why would they choose to make ONLY FO sights with this discrepancy? Why not center the stupid things?
-
Challenge with Fiber Optic Sights - POA/POI
Background - I'm used to shooting stock Glock and sevingy tritium or plain black sights. In these situations you line up the top of the front sight with the top of the back sight and the dot is in the middle, making your POA/POI right in the middle of the sight. See below: I have recently put a set of fiber optic sights on my Glock 34 and purchased a Wilson X-Tac with the F/O battle sight. Both (and all) F/O sights seem to have the of dot towards the top of the sight and not centered for some reason. When the top of the front sight is lined up with the top of the back sight the F/O dot is higher. See below: When shooting fast I typically align the F/O dot in the middle of the back sight causing me to shoot significantly low with both the WC and G34 because I do this: Does anyone know of a F/O font sight that has the F/O tube in the middle of the front sight, it's driving me crazy!!! I don't know if I can make the mental change at this point although my eyes are getting old and could use the extra visibility. I called Chris at CPWSA and he agreed that all F/O sights seem to have this discrepancy, I may have to change back over to plain fonts or tritiums if I can't find a solution although I do love the visibility of the F/O sights. Any suggestions or leads greatly appreciated.
-
IDPA. Saturday. 3-8. South Jersey
It's on the back action range.