Everything posted by Silphidae
-
Help for first time reloader - 9mm OAL Flat Point
My dies are set to arrive this week and I'd like to get started reloading. I have #500 Berry's 124grain Flat Point Plated bullets ready to go with CCI small pistol primers using Titegroup powder. I'll be using a Dillon 550b machine. Here's my question....I can find OAL data for the round nose plated bullets but none for a flat point 124grain. How do I ensure that my OAL is correct if I can't find an exact bullet to match the OAL with? I'm a little concerned, as I hear Titegroup is a "sensitive" powder and I know that since the Flat Nose is shorter thatn the Round Nose I should theoretically have to seat it deeper but I don't want to guess on my first try. Thanks for any help....I have the Lynman Reloading Book and did a good search online.
-
in need of a good smith. gloucester county
I used Winters for a 686 trigger job and it turned out pretty good, went from 13+ lbs to 8.5lbs with a one day turn around. I was happy with his work.
-
First handgun for wife?
She has some time to make a decision.....don't rush it and buy the one she likes now. Wait a month or two, get her some practice and let her try a boat load of guns. I bought my wife a .22 after two outings cause she hated my glock. Now she loves the glock and its her favorite but it took some experience before she realized what she liked.
-
AmmoMan 9MM $299 Shipped
I've used him occasionally with no issues. Have to be selective on what you buy as good deals are hard to come by, but when they're there he's alright. I also live 5 miles from him so picking up is easy. $20 off a case and 3% discount for cash. Tax is added. I've purchased 1000 rounds PMC .223 for $330 and 1000 rounds of S&B 9mm for $230 this summer. His prices have almost doubled since "the scare".
-
Magtech ammo especially dirty?
It's better than federal target .38 in my opinion, was hacking up powder for an entire day after shooting 100 rounds of federal. Not so bad with Magtec.....first revolver so I'm still shocked just how dirty the ammo is compared to auto loaders.
-
What are ya drinking?
-
Interested in a Sub-Compact/Pocket, but how can I get a feel for these before purchasing?
I'll be at Bobs at 10am tomorrow. Pm if you want to meet up, will have my 26 with me.
-
ITS OFFICIAL. BAN GOES INTO PLACE 12/22/12
How Soon?
-
Change.Org BS
I've unsubscribed but the onslaught of anti-campaigns drives me nuts. I feel personally attacked by this crap and sickened the way this tragedy has been used to promote the agenda of these people. I dislike being on the defensive but wouldn't dream of making this tragedy an avenue for my political beliefs. Maybe I'm the idiot for having some internal compass?
-
Change.Org BS
I can't believe I'm subjected to this BS.
- Shot Timer Suggestion
- Shot Timer Suggestion
-
Shot Timer Suggestion
Looking to get a shot timer to practice for IDPA. Looking between the CED 7000 and Pocket Pro II and would like some real world feedback. I like the features of the CED but read the high pitched buzzer and delicate build are a negative. No real negatives with the Pocket Pro except less features and a tad bulkier. I just want to use it to practice draws, reloads and splits so I'm thinking the Pocket Pro is the way to go for me?
-
Finally, somebody willing to "do something" about guns...
Has anyone actually tried this. I have three very cheap air rifles and $750 would come in very handy for the holidays!
- 686 for IDPA
-
686 for IDPA
Th trigger on my 686 is awful on double action. Anyone have suggestions for a trigger job in south jersey I'd be open to hearing suggestions.
-
686 for IDPA
Any recommendations for speed loader holders? I've found the North Mountain holders but I would like to have a less expensive option if possible. Going with comptac holster, Safariland III loaders and need final component. Picking gun up next weekend.
-
Anyone notice the S&W 686 6-shot isn't listed on A&As site anymore?
Sorry, most excited purchase in a while!
-
Anyone notice the S&W 686 6-shot isn't listed on A&As site anymore?
That's cause I just put a deposit on it this afternoon! Stopped by Arms and Ammo last Wednesday to buy the 686 he had, ended up leaving with my second choice, a Glock 26 cause he sold the 686 before i could get to it. Was on the waiting list and received the call on Friday that one was on its way. Ill pick it up on November 3rd just in time for the South Jersey IDPA match the next weekend and the Quinton match the following week. Time to order the speed loaders and holster. Thanks to Paul for another easy transaction, can't wait to try the SSR division! Went with the 4" based upon the research and some recommendations on this forum.
-
686 for IDPA
Stupid me, online search showed the amendment. Looks like I'm going on a spending spree, have to wait another 24 days to pick it up.
-
686 for IDPA
Pizza Bob, The IDPA rule book states the power floor is set at 125,000 for ssr. Where did you get 105,000 for a power floor? Putting a deposit on a 4" 686 tomorrow and looking for inexpensive ammo that makes the minimum power floor.
-
PMC .223 55gr for 5.99 a box w/ free shipping code
1,000 rounds delivered today. Had a talking to by the wife and explained now food of a deal it was. After some debate all is good. How this sale lasts a little while longer as ill buy some more at this price!
- 686 for IDPA
-
686 for IDPA
Do you recommend the longer handled speedloaders vs the shorter ones? What is the practical difference as the comp IIIs look easier to Control and they don't specifically ban them inmthe idpa rules m Thanks.
-
686 for IDPA
Thanks, great info so I can start my research. I was told my permits will be ready on Thursday (after a six month wait). If they are I'll have a 686 that night and start ordering the accessories. As I have questions I'll post them up. Thanks again.