Everything posted by Silphidae
-
686 for IDPA
Thanks. I love shooting the 686 rentals and can't wait to add this challenge to the Idpa world. I have a great belt Just don't know ANYTHING about speed loaders and gun length.
-
686 for IDPA
Please give me a little help. Who has experience with revolvers for Idpa? I want to get a 686 but don't know what the optimal length is, thinking 4"? Also I'm good with the holster but what are the recs for speed loaders and holders? Again, I shoot Idpa with a Glock 34 and really want some opinions on revolvers. I don't want to look up some obscure model that hasn't been produced in years!
-
+1 lesniewv
Enjoy, hope your eyes are better than mine!
-
Buying just one(for now), and need help with my OCD!
You won't know what you like until you shoot it. I despised everything about Glocks but once I shot it I was in love. Tried about 10 different guns and the ones that I liked best at the counter were some of the ones that I hated once I shot them. Still want a 1911 I just can shoot them at all...long story short go shoot a bunch before putting down your money. It's worth the $100 bucks to rent a few on your short list.
- Want to try Glock G26
-
Want to try Glock G26
Estimate I only have 4 more months to wait for my permits! Carried the G17 pretty easily this weekend so the 26 will be a godsend....wife didn't notice until she hugged me a couple hours into the trip.
-
Want to try Glock G26
I have a buddy with a g27 and were going to give that a shot when he can find the time. I really want to stay with the 9mm platform for simplicity. Figure if I can shoot the 27 comfortably the 26 will be a no brainer.......I assume.
-
G19 owner looking at G34 or G17 for IDPA use
I shoot my G34 better than my G17 in IDPA matches. Not much difference when punching paper, both are Gen4.
-
Want to try Glock G26
Thanks for the feedback.
-
Want to try Glock G26
I just holstered a 19 and 26 at Bobs in my supertuck. 26 was much less noticeable ,I'm 6' 2" and 180lbs and not real broad in the shoulders so my shirts hang right against the holster and gun. I need all the help I can get but I'm hesitant to buy a gun without trying it. I'm walking around with 17 now and everyone can see if I ask them to look for it.
-
Want to try Glock G26
Anyone have a Glock 26 they would be willing to let me try? I'll buy the ammo we use (obviously) and give you a box for your troubles. I'm a member at Bob's and Telco and will be at Quinton tomorrow for the IDPA shoot. Anyone close to these ranges let me know if you'd be willing to accommodate my request. You can shoot my G17, G34 or my wifes tricked out Mark III if you wish.
-
Skunks and chipmunks
What makes chipmunks such a nuisance?
-
Unions fill deptford mall
I had to pay $120 for a union person to plug in each electrical cord while I was working at a convention in Philly 7 years ago. I can't imagine that would be the going rate in a free market....seems very unamerican that we're forced to pay an overinflated price for simple work. If I needed an electrician to do the work for safety reasons I'd like to have the option to bid it out to a qualified person rather than get charged a such an absurdly high rate for such a silly task. That one experience really left me with a bad taste for the union extortion machine in Philly.
-
IDPA Card For FLorida CCW Training Requirements?
Had business in Florida on June 12. Took some time to make an appointment and get the process rolling while I was there. Process took a total of 15 minutes Received my permit in the mail today.....16 days is incredible. Only down side is they kept one of my idpa cards, but it's no big deal since I have a second. I assume I could have taken a photocopy of the card but didn't think of it at the time. Crossbreed Supertuck on order!
-
Permit wait lately?
My town is consistent. 6 months for my FID, 6 months for 1st and 2nd rounds of PPs. Just submitted third round on June 21st and hope to be able to buy myself a Xmas present.
-
Rifle Ranges near Stratford NJ(08084)...Not SJSC
Depends what you're looking for. Telco is across from Atco Speedway.
-
IDPA Card For FLorida CCW Training Requirements?
Glad to be of help! Now I just can't wait to get the fingerprint cards so I can get this thing rolling.
-
IDPA Card For FLorida CCW Training Requirements?
Here's what I sent in yesterday; Hi Amanda, I have included a summary of my involvement in the International Defensive Pistol Association (IDPA), which is an organized shooting competition. It is based on real world concealed carry situations and equipment, emphasizing safe handling and accurate shooting. The link below will give you additional information. What is IDPA? http://www.idpa.com/dps_info.asp Here is my membership card and official standing within the club. I have classified in the SSP division (glocks and the like) as a Marksman. I shoot once per month in this division (picture removed). Here is a print screen of my official classification on the IDPA website (picture removed). Here is the course of fire that I had to complete to get my certification as a marksman (had image of qualifier attached). Thank you for looking into this. I believe that my classification in IDPA fully meets the training requirements for the Florida CCW permit, "documentary evidence of experience with a firearm obtained through participation in organized shooting competition". I appreciate your response and time you spent with me on the phone today. Here's what I got back today; Yes, I did receive the information. Your training will be acceptable. Amanda Herring, Public Inquiry Supervisor Florida Department of Agriculture and Consumer Services Division of Licensing Bureau of License Issuance. I'm really impressed with Florida so far!
-
Anyone with first hand Mosquito experience?
I have a friend that bought one three months ago. We've taken it out three times now and it has been less than fun to shoot. 1/10 shots FTF regardless of ammo; cci mini mags, cci standard, Winchester 333 and Blazer. It gets much worse as it gets dirty eventually reaching 5/10 FTF at the 100-150 round count. Trigger is the worst trigger I've ever experienced, altthough I've only shot about 20 different guns in my life. Maybe he has a lemon but I prefer my wife's Mark III (and so does he). Based on his gun I wouldn't buy one.
-
IDPA Card For FLorida CCW Training Requirements?
Called them and reached a LIVE person. She did not know the answer so talked to her supervisor. Asked me to send the information to them directly (gave personal email) so they could look into it. So far I'm impressed with them and will let you know the response.
-
IDPA Card For FLorida CCW Training Requirements?
I'm a marksman so that's great news! Thanks for the links.
-
IDPA Card For FLorida CCW Training Requirements?
I know about the Hunters Ed thing and have my booklet complete. Time is tight and I'd rather use my one free Saturday a month to shoot IDPA. I'll get he HE thing done eventually but want to use what I have to get the ball rolling. Just ordered three fingerprint cards so I'm hoping this works. Will call FL tomorrow and see what they say.
-
IDPA Card For FLorida CCW Training Requirements?
Has anyone successfully used their IDPA card/membership to get a Florida CCW? This is straight from their website; "Other acceptable forms of training documentation include the following: documentary evidence of experience with a firearm obtained through participation in organized shooting competition;" If so I'm starting the application today!
-
Glock Barrel Cleaning - When is Enough?
I'M HAPPY NOW! Bought some M-Pro7 and went to town with the nylon brush for some time. 10 more patches and the patches were coming out nice and clean. Another question popped into my head. I'm using 2" x 2" patches and folding them over to make triangles out of them. It's a little challenging to push them through the barrel....do you think this extra pressure could push the patches deeper into the grooves and I was really over cleaning? Yes - I agree that 20+ patches is crazy!
- Glock Barrel Cleaning - When is Enough?