Skip to content
View in the app

A better way to browse. Learn more.

New Jersey Gun Forums

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

Vlad G

Members
  • Joined

  • Last visited

Everything posted by Vlad G

  1. In my experience the biggest downside for pencil barrels is that your selection of gas blocks is much lower.
  2. Works fine, assuming the barrel and its gas port are correctly matched. I know nothing about the barrel you mentioned, but I have a lightweight upper built with a Spikes 14.5 pencil midlength barrel and it works just peachy.
  3. At OB (and anywhere really) for pistol and shotgun targets less the 7 yards is really bad news unless you shoot frangible ammo. Rifle steel .. at less then 50yards you will quickly destroy it, but quality steel (think 2/3" AR500) will survive a long time from 50yards out if you are not hitting it with AP ammo or really heavy calibers. CJ, has longer ranges and reasonably they want you to place you targets in a such a way that bullets hit the back stop, so placing a steel target on the ground at 50 yards means that if you miss you will probably skip it over the berms so you will have to move that back. I'm not sure how they feel about steel hanging higher such that misses would hit the back stop, I only really care about the 300yard line on that range. The biggest safety tip: shoot quality steel, not beat up crap. Good steel targets shatter the bullets pretty effectively and last longer. Steel that gets dented, gouged, or damaged will start throwing bullet fragments every which way including back to the shooter.
  4. OBRPC in Old Bridge, and CJRPS in Jackson both allow steel targets and have steel shooting matches. Both are clubs you would need to join, but their matches are open to the public
  5. What does a metal target range even mean?
  6. I'm not sure why you are confused, follow the manufacturer's recommendations. They went out of the way to make you video. What Brazo's do as gunsmiths is their issue because if they mess it up they take another one off the shelf, but Dawson's sells more sights then probably anyone else so go with what they recommend.
  7. The gunsmith that gave you that advice is in error. When you touch the bottom of the site you are actually affecting the size of the sight in two directions, both front to back and bottom to top. Getting that right is a lot harder. When you work on one edge you are only affecting one dimension.
  8. Dawson has videos for installation of all their sights. Use their methods:
  9. Either reload your own and do your own QC or shoot factory. The savings aren't worth it.
  10. I wouldn't buy a gun for someone else to use without that person trying it first. "Pretty" only matters if the person can shoot it.
  11. Reading comprehension is a thing. Smokeless powder is explicitly excluded, this is a about a sub-component used in manufacturing. It affects how that gets shipped or stored, but not a product you and I buy. This may or may not affect the availability of smokeless powder, but not its classification. Also a LOT of powder is now being made in other countries, specially the stuff most of us user, so it isn't relevant to that as it ships past the step described.
  12. There are schedules and then there are real life numbers. HE's is maintaining guns that not only can't be allowed to fail, but have very high costs if they fail, in human and legal terms. For him it makes perfect sense to replace cheap parts even half way through their lifespan so if anyone wants to ever question it he has a overly cautious and well documented maintenance schedule. That is good. However it isn't necessarily the right thing for everyone. I've shot a few rounds through ARs although probably not as many as he has, I have to pay for my ammo I have NEVER replaced an extractor or its springs. In my experience quality bolt groups don't seem to have these parts wear out. I replace them when I get a new bolt. I have used my spare to fix other people's extractors and springs but they tended to be the older spring design on bolts of unknown origin. I have never replaced a set of gas rings nor have I had one fail. I have replaced the action spring ONCE not because I thought something was wrong but because one day I realized I never had on my primary game rifle and it was 10+ years old. It is probably still fine but a 3pack was like $12 at brownells so why not. I replace the gas tubes when I replace the barrel or the gas block. Never had one fail in any way. I had a bolt fail at around 15k so that one I now replace around 10k, but interestingly not because I schedule it that way but because that is roughly where I replace my barrels and I consider barrels and bolts matched for life. None of this is to say you shouldn't replace parts earlier. Most of the wear items on HE's list are dirt cheap and you should certainly have them in your spares kit. My spare kit that goes to the range has a entire LPK and a complete BCG in it because I rather replace the entire bolt on the range then futz with the springs in it. I do think at a minimum everyone should have spare LPK worth of parts and at least a complete bolt if not a whole BCG as spares. The other components are far less likely to break.
  13. I think your terminology us what is confusing us. You have a bullet (the bit up front that goes flying out of the gun really fast) and you have a case (the bit that holds the bullet and the powder and the primer and falls out of your gun slowly). Bullets can have jackets (the bit that covers the bullet) and the jacket can be copper, steel, polymer, etc but the jacket is part of the bullet and goes flying really fast downrange still attached to the bullet. And then the bullet has a core which most of the time is lead but sometimes can have steel in it. Usually if the bits that go flying really fast (the bullet, as made up by its core and its jacket) contain steel the you can end up with backstop damage and you likely be prohibited from shooting it indoors and sometimes even outdoors. Usually if the case (the bit that doesn't go flying really fast) contains steel no one cares.
  14. Yes, but I've also seen that happened with a batch of undersized bullets and a rifle where the barrel nut was loose. Although to be fair in both of those cases the barrel took enough damaged to be called done anyway.
  15. You think for a second they didn't have a prior knowledge?
  16. No. In simple words: grandstanding.
  17. Not shooting before 9am is just being a good neighbour. You can't only ask the other people around you to be nice, you have to be nice as well.
  18. Only if you haven't seen as many as I have shit the bed, over and over and over again. But you know what, I never succeeded telling people not to buy things so I'm not even remotely going to try it. Capitalism is great, buy whatever makes you happy.
  19. You mis-understand me. I couldn't care less what people spend their money on, but to me this is like drooling over a Hi-point. Hey, whatever floats your boat ..
  20. Rest assured, I shall not.
  21. But why? You can have semi-auto shotguns that are half the weight and probably work twice as well not to mention more ergonomic given how shotguns shoot? I've seen so many AK based shotguns shit the bed, you couldn't give me one for free.
  22. Oh my .. that thing is 10lb. Why oh why would you do that to yourself?
  23. Try them all, see what shoots best in your gun. It is basically a very heavy caliber rifle so bench it and shoot it at 100 yards for groups, pick the better of them all. Realistically the terminal performance doesn't really matter, you throwing a huge heavy hunk of metal downrange, you don't really need to worry about expansion. My advice for slug groups is to limit your self to maybe 20 shots per session or you are going to develop a flinch.

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.