Skip to content
View in the app

A better way to browse. Learn more.

New Jersey Gun Forums

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

Vlad G

Members
  • Joined

  • Last visited

Everything posted by Vlad G

  1. Vlad G replied to BryanRT360's topic in AR Discussion
    I'll add this advice: If a gun is overgassed, I do think that the correct solution is fixing the gas problem and not fixing the ejection problem with a heavier buffer. Sure, you can fix the ejection pattern but that doesn't fix the issue of too much gas passing through the system. I would call faxon and ask them if they could take the barrel back and replace it. If you have the means I would measure the diameter of the gas port, ideally with pin gauges but who the hell really has those lying around the house? A good set of drill bits in the appropriate sizes could act as a pin gauge set. Failing that I would add an adjustable gas block, despite other concerns about them. You can make the rifle eject in some specific spot by playing with recoil components but that is treating the symptoms not the disease.
  2. Vlad G replied to BryanRT360's topic in AR Discussion
    Gotcha we are on the same page then
  3. Vlad G replied to BryanRT360's topic in AR Discussion
    BTW, personally I disagree with the match gas length to buffer tube length. I find that it is not necessary and I know lots of people using rifle length gas with carbine systems. However, I also find that buying barrels with properly sized gas holes is really important no matter what you are building. I share HE's general distrust of adjustable gas systems and I don't use them even on my race gun, but that is an NJ specific problem, as there are some adjustable gas systems designed with detent locks that do not go out of adjustment, but they tend to suck for NJ because of one piece designs.
  4. BTW, I have one of "tactical" 500's with the thinner barrel and I never felt that it didn't have a steam heating pipe kind of solidity to it. I have no idea what purpose the heavy barrel serves, short of prying crates or something.
  5. It used to be very clear, the 590 had a metal safety, metal trigger group and heavy walled barrel. Now, it isn't so clear .. they have a lot of versions, and I mean a LOT of versions of the 500/590 platform and some of the features from both sides of the line are creeping across. It used to be that the 590A1 also had ghost ring sights, and some still do but some don't soo .. Yeah same gun, a few features packaged differently. My recommendation is no matter which model you buy make sure it has replaceable chokes, do not get one of the fix cylinder or IC models,
  6. Why? You think after making millions of them Glock will have a hard time running plastic pouring machine 5% faster?
  7. Of those two, 500. If I was buying a pump shotgun I would look at a Benelli Nova. They should be about $400.
  8. I've mortared bad ammo out of my rifle before. In my experience it is always faster then fumbling for tools. Carrying more crap around doesn't strike me as a good plan, but that's me. I suppose people need something else to attach to their hand guard, does it come in MLOK?
  9. I feel like if this happens enough to your gun that you need to carry a specialized tool to clear it, maybe you should fix your gun. A sturdy knife is one thing, it is a multitool in its own right plus it is a weapon, but that tool? I mean sure, if you are armorer and people keep bringing you jacked up weapons having a tool makes sense.
  10. Vlad G replied to NJGF's topic in Shotguns
    Ok, so lets say you are shooting knockdown steel, with stages of if say 30 targets and crank some math. For the purposes of this conversation, the pump and semi load just as fast, which may or may not be true. Lets also assume you can reload 1 shell per second on the average. I'm using that number because it used to be the golden standard before quad loading become a thing which pushes the numbers to 0.5seconds per shell, but most people never get to that. In the outlined scenario your Pump with 10rd to start has a 4 seconds heads up over the semi auto because over the entire course of 30 rd it only needs to load 20rd, to the 24rd the semi need to reload. So right now all, other things being equal you are 4 seconds faster. Except you are looking at a semi shotgun that cycle in less then 0.5 seconds vs the 1sec or more you will need to cycle a pump, assuming you are not short stocking it going when you try to go fast. over those same 30rd course, the semi would be picking up 15 seconds over the pump so those 4 "free" seconds you get from starting with more rounds are no longer so hot, are they? Finally let say you are running a pump gun fast enough to keep up with a semi, you are now still dealing with more felt recoil and hence a lower recovery time from shot to shot. and 870 quality has been really poor lately, I see lots of people having problems with them.
  11. Vlad G replied to NJGF's topic in Shotguns
    A few false premises I fear. 1) All things being equal most people shoot a semi-auto faster. 2) The additional capacity of a pump is broadly meaningless when you look at the total number of shells you have to feed it. You may have lets say 5 extra shots, but they are 5 extra shots only once. It is going to be slower to shoot for every single shot. The slower shooting will add up to override the additional capacity. 3) longer barrel are harder to transition quickly, I say stay at around 24", maybe even less 4) Personally I think the 870 as currently produce is one of worst choices. I would suggest a Benelli Nova, or maybe a Mossberg, but really I wouldn't buy a pump.
  12. When will people learn to always stock up for emergencies, ahead of emergencies? With elections coming, why was anyone waiting for the latest craze? You don't wait until the hurricane hits to buy a generator, you buy your milk and bread before the snow storm, you fill your gas tank before your run out. How many panics do you need before you learn?
  13. Any of the barrels will fit, the 3gun specific mods are basically extended controls and a enlarged loading gate (and some internal polishing). I guess and extended chokes. Any of the M3000 barrels will work. Personally I feel like 24" is the perfect barrel length for most things, but I don't hunt. I can do everything I want to the pattern with chokes, and I guess I'm not a good enough shotgun shooter to tell the difference in sight radius. Maybe if I shot a lot of clays I'd feel different. BTW, there is nothing wrong with just buying the M3000 with the barrel you want. The extended controls and port opening are not important if you are just shooting clays so why spend the extra money, the spare barrels are not cheap, they are like half the cost of the gun.
  14. Not to be a wet blanket, but keep in mind that anyone can sign up and basically count their membership as a donation. Their membership having doubled is not necessarily a sign of of the that LGBT folks are joining the group, just that some one is.
  15. So this is a thing today .. https://www.leakedsource.com/blog/verticalscope
  16. Stay away from lasers as a training device, as far as I'm concerned they are completely the wrong approach. You don't want to have your eyes drawn to the target to see where you hit, you eyes should be focusing on the sights. Sure there are times were target focus is a thing that makes sense, but it is a bad thing to start with. Focus on a appropriate sight picture, not the target. Dry fire is excellent tool, if done right. You can practice everything but the BOOM (and implicitly recoil management) but those things are actually not that important in pistol shooting. Yep, I said, all those things happen AFTER you've done all you could to the target, and you have very little influence over them. Sure a proper grip will reduce the amount of perceived recoil and how much the gun moves, but the proper grip is all about the things that happen before the BOOM.
  17. M3000 (or M3K) by a LONG shot. 1) accessories on shotguns are a lot less important and a lot of them already exist for both guns. Rib mounted sites, scope bases, etc, all those things work on lots of guns. I'm not sure what accessories you plan to put on gun and what you plan to use it for but don't worry about accessories because .. 2) I have seen lots of 930 and increasing numbers of M3000's in 3gun competition. I've RO'ed at some major matches. 3Gun may not be why you are buying the gun, but it is a good example of how crucible of sport shows weaknesses in design. In my experience 930 are NOT reliable under any kind of significant stress. I'm not saying some aren't or can't be made to work, but when the guns of the Mossberg sponsored shooters shit the bed you can be pretty sure their guns are as good as they can be. On the other hand inertia guns seem to be boringly reliable, Including the M3000. Full disclosure, I've been shooting an M3000 for the last year and change, I've shot probably about 2500-3000 rounds of bird shot through it, and about 200 slugs and maybe 50 buck. I have had exactly 3 failures of any sort. Failure 1, really low recoil B&P slugs don't cycle the gun. Failure 2. a failure to feed out of the tube when I had a chunk of tree bark in the action. Failure 3, I had a round fail to feed from the tube, that one currently blaming on a out of spec ammo rim. I call that stupidly reliable. If this is a hunting gun, it doesn't matter. If it is a competition (of any sort) or defense gun I'd take the more reliable one. 3) shotgun porting is useless as far as I'm concerned. Unless you use one of those monster comps, I don't think they reduce recoil and the barrel doesn't rise that much that it needs to be held down. 4) The M3000 has some features people are not aware of. First it is lighter then the 930. If you are overly recoil sensitive that might matter, but I think I like a lighter gun that swings faster. Inertia guns are stupid clean and require very little maintenance. The inside of the barrel is chromed. Like the Benelli M2 and the Beretta 1301, it feeds a shell not based on the operation of the gun, but based on trigger pulls, what that means is that the next shell feeds from the tube on the lifter when you pull the trigger, not when the action moves which means it has a lot more time to travel from the tube and reduce the risk of the action overrunning the feed system. Like the 1301, it has a hinged shell latch system, which some people like and some don't but one huge advantage is that you can empty the tube without cycling the action or any of the rounds through the chamber. Some of the internal parts are compatible with the Benelli parts. For example I've replaced my extractor with a M2 one, drop in part. It wasn't that I felt that the original extractor was bad, but it was $7 part and I could so I did. Unlike the M2, the M3000 has the recoil springs round the magazine tube, not in the stock. That means you cut and shape as much of the stock as you want for your fitting needs without having to worry about action parts inside of it. So yeah, I'd buy another M3000 or M3k in a flash. I wouldn't spend any of my money on a 930. That said, they are both cheaper guns which means neither is perfect. While my M3000 has been perfect, some people have been running into small issues, like having to debur the extractor channel, or polish the outside of the mag tube. A lot of the earlier issues were addressed by the manufacturer and are now standard in the M3K model (which comes with polished mag tubes I think) Oh and a last thing, Stoegers are sold in the US by the Berretta/Benelli people and serviced by the same, and Benelli has a stellar reputation for support.
  18. Some glasses can be made to have the prescription work in all directions. For example my current shooting glasses (Rudy Rydons) have the prescription edge to edge and following the curved lenses. It doesn't matter which way my head is on the rifle as long as I'm looking through the glasses I get a nice clear picture.
  19. Get a gun that works.
  20. usually at cjuspsa.org, but now you would be looking at the June match
  21. Ok, who left the troll cage door unlocked today? Alec is out and rampaging about again ...
  22. You are doing it right. He has no idea what he is talking about. Good advise from gun store/range employees is uncommon..
  23. I can't picture what he was taking about. Post a picture.
  24. There are wrong ways to hold a gun, but the notion somehow how there is a nerve that causes fatigue seems kinda made up bullshit to me. Todd Jarret's old video is still valid, Shannon Smith has newer video showing basically the same thing. Bob Vogel has a slightly different take
  25. I'd also say a Dillon 550. It is flexible, easy to change calibers, not stupid expensive, but can do high enough volume per hour last minute.

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.