Skip to content
View in the app

A better way to browse. Learn more.

New Jersey Gun Forums

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

Vlad G

Members
  • Joined

  • Last visited

Everything posted by Vlad G

  1. Found the Bladetech attachment stuff, its called TMMS: http://shop.blade-tech.com/mini-tmms-p-182.html Those things attach to techloks or molleloks which attach to anything you want.
  2. For what gun? I think you run Glocks? The ALS for a glock 17 is $41 on amazon. A pack of 2 QLS mounts and a Holster fork is $38 A MLS fork to mount the QLS plate to Molle is $14 A Bladetech Revolution is $35, I didn't hunt down their quick detach stuff. I use Bladetech kydex and Revolution holsters as well the ALS holster. They are all great, but the ALS is so easy to use I have no problem using it even for USPSA speed draws, in fact it is all I'd buy today.
  3. Look at the Safariland ALS holsters and the QLS mounts. They are not expensive. Depending on model and features the Holster is about $35-40 and the QLS mounts are $20 or so. You can mount a QLS receiver on all sorts of things and snap on the holsters to all sorts of gear. You can also look at the Bladetech holsters which I believe also have a quick detach system now, I don't just mean the techloks, they have something like the ELS/QLS, just can't think of its name now.
  4. That's rather sharp, I think it is twice what I payed last year. I still have enough so I'm not tempted to pay that much just yet.
  5. That's fine, my ammo can end up in a frozen bag over night then cooking in the sun during the day when traveling to matches. It may not be a huge difference, but I suck enough as it is so I'll take ever bit of margin. However the biggest thing for me is how well it measures and flows through the Dillon measure. It is a fast flower, I drop 25gr about as fast as I drop 4gr of pistol powder, so I can keep going at a reasonable rate. True, right now I'd take whatever I could find too.
  6. Cause its rather awesome? It is really good for 223 and 308, it is very temperature stable, and it meters really well in progressive presses, it can produce really accurate loads. It is also relatively cheap.
  7. WML/APL and the TLR1 (and family) can be had in that price range.
  8. Nope. All powders are in VERY short supply.
  9. It is not that kind of restraining order. Also, I'm not sure that TRO actually restricted them from raiding the place, it seemed to have a criminal investigation exemption.
  10. FFS, can Ruger make a gun they don't have to recall?
  11. On the other hand the Lee loading manual is like $15 and contains a very large section on the how and why of reloading. Ask your self how much your eyes or skin is worth. Even if you have the smallest of case failures you will at least destroy a mag, and there are t that many mags cheaper the $15.
  12. It is about the plastic 80% lowers with soft and different colored plastic that needs to be removed, which makes it easier to finish. The ATF claims that the manufacturing of it entailed making a finish receiver and then filling it with the extra so it is a finished firearm according to them.
  13. I'm betting no records were there anymore.
  14. The other thing everyone forgets about recoil is that recoil doesn't stop being generated when the bullet leaves the muzzle. Even after the bullet has left the muzzle, there are still forces acting on the gun to increase recoil, primarily the gases exiting the muzzle. The more gases and burning powder are still exiting the barrel after the bullet has left, the more recoil keeps on being generate. Yes, it still pushes against you, at that point you basically have a small rocket engine trying to push the barrel and the gun towards you. This is why fast powders like Clays can have a softer perceived recoil. Because they burn up quicker and expend more of their energy getting the bullet going down the barrel, where a slower powder may end up burning longer, after the bullet left, continuing to generate more recoil. Think of fast powders as being more efficient at turning nitrocellulose into bullet velocity with less wasted heat, flash, and gases that contribute to the recoil but not to the velocity. At the same time, if you have a barrel with a compenstator, the math changes. You want a slower powder that generates more gases because you need the excess gas to operate the ports and provide reaction mass. Basically now you want the rocket engine because you are thrust vectoring that rocket engine to nullify the recoil generated by the bullet.
  15. Or the bonus points for style No one starts at the top, unless they are a ringer.
  16. Scores are up, excepts Mike's second classifiers which I need to figure out were the hell I put.
  17. Pre-registration will be available early next week at obcats.com On that page you can also click on the 'getting started' link for details of what you should bring
  18. Do it, old bridge is a great match.
  19. Guys you can buy Sten gun in isle 4 at Home Depot. There are whole books on how to manufacture a submachine gun from commonly available parts and hand tools. Add in the growth of 3d printing and this is a materials technology reality vs wishful thinking thing.
  20. As someone explained to me today it is even more complicated that it sounds to buy them out because Freedom Group is owned by Cerberus but Cerberus is not a regular type of company which means that spinning it off to sell it is actually quite complex.
  21. Hey guys, I have the scores MOSTLY done, but I need to figure out some of the scribbled on paper scores. It turns out that when I said make sure I get all the scores written on paper at the end of the match and that they are clearly labeled that message didn't get as heard as I would have liked. Sigh.
  22. Smoothness can be done easily. Just take the gun apart and remove all casting marks, mold marks, etc, lightly polish the surfaces to make the whole thing look like it wasn't made by forged Matel's discount cousin. That will smooth out the trigger quite a bit. The weight .. dunno check rimfire forums? I recall years ago they had a thread dedicated to directions on how to make the Mosquito worth the Sig label.
  23. sure but the joke is on us, because the anti's can point at him.
  24. As far as I can tell this is actually old news, the made an offer in Jan, the offer expired in Feb, and it is all publicity stunts. The new hostile takeover bid is odd because last month they didn't have the money to do it. Sure, Soros/Bloomberg/whoever could have put down the money, but the backlash will be fantastic. Plus the company seems to be full of vapor. Edit here is more: http://www.thefirearmblog.com/blog/2014/03/12/penny-stock-company-gdsi-buy-remington/ They are basically a penny company, with no products, 65mil market cap, and two employees.
  25. The powder shortages are concerning me, I can't even order the stuff I use to reload. This is part of the problem with shipping all our powder production to Australia.

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.