Skip to content
View in the app

A better way to browse. Learn more.

New Jersey Gun Forums

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

Vlad G

Members
  • Joined

  • Last visited

Everything posted by Vlad G

  1. I don't blame inanimate objects. However in my opinion it is a poor design that only makes problems worse for no benefit that couldn't have been achieved in other ways.
  2. I don't really think the holster pulls the trigger Maks, I just think it makes it much more likely that the shooter will screw up vs a holster that does not require finger pressure in that area. Also not everyone's finger are shaped the same, have the length or curvature, or grabs a gun the same way etc. Where your finger ends up is a far more variable then you give it credit for, even with the same gun and holster.
  3. You say that like those are two different unrelated facts. The problems with this holster are only made much worse by the fact that they bought in mass by people who don't know much about holsters or the kinematics of drawing a gun under stress. The holster shouldn't make things worse. I didn't have any NDs, "we" the shooters in NJ participating in matches around here had two NDs.
  4. ... or any holster with a button over the trigger guard for that matter. Yes, there is going to be a page of people telling me how they've used Serpa for ever and never shot themselves and never had a problem and how some branch of the military swears by them and how some dude with a web channel thinks are awesome. It is also very likely most everyone will ignore me and thats fine too, but I want to sleep better at nite so I'm putting this out there so maybe someone will listen. There are three distinct problems with the Serpa holsters. The primary problem is that to unlock them you need to put pressure with your finger tip on a button located roughly over the trigger guard. Lots of people are going to come tell me how this is not a problem, they've done it many times with no issues, and with proper training it is awesome and that I am hater that doesn't get it. It is a problem once you add any degree of stress or speed to the equation because human hands don't operate that way and your trigger finger is not independent of the rest of your hand under stress. The actual danger is that as you draw your gun on you trigger finger is applying pressure on the holster body and then will fall into the trigger guard, on the trigger and continue to apply pressure. I'm sure you have all seen those videos. I'm also sure the fan's of serpa's will come tell me now how they never that problem. Good for you, right up until you do. The secondary problem are the serpa holster with "high wall" sides. On those you can actually catch the trigger and activate it as you holster a gun. Some were recalled because of it, some were not. The final problem is that the button is sensitive to dirt, ice, snow rendering it inoperable or requiring even more force to activate aggravating the first problem. Also a ton of videos out there showing you this. I'm not the only person out there who thinks they are a problem: Larry Vickers: Serpas banned from training courses source: http://www.m4carbine.net/showp...043371&postcount=112 Gunsite: Serpas not officially banned, but not recommended source: Cory Trapp of Gunsite http://www.snipershide.com/for...wflat&Number=2714778 The folks at FLETC put out an advisory that pretty much says Serpa's suck: source: http://m4carbine.net/showthread.php?t=96534&highlight=Serpa The list could keep on going. I could also talk about how lots of IDPA clubs have banned Serpa holsters because of range injuries and how I'm pretty sure we've had 2 ND's around here in the last couple of months because of them. I recommend you do your own research as well on all the problems reported with it. The short version is that it is a cheap holster that mostly works if you aren't doing anything to challenging and that can work against you if you are doing some stressful, kinda the exact opposite of what you want. I know that my post will likely not stop anyone from buying one, and I was tempted to ban them from the USPSA matches I run but I really can't do that either. So what I can do ask you stop buying them and maybe sleep better at night. There are many other holster designs out there that work better and don't cost more, just because you can find Serpa's everywhere and the packaging looks exciting it doesn't mean you should buy them.
  5. Good for you, I'll make a separate topic about this in a bit. To the original question, yes you should have a holster.
  6. Ok Serpa holsters are wonderful, buy one for everything you own. Also buy kevlar pants. Seriously there is something very stupid by design with Serpa's (or anything that has a button activator over the trigger guard for that matter) and just because they are cheap and say Blackhawk with an exclamation point over it does not mean they are fine.
  7. Please don't buy a serpa.
  8. Define military grade. There isn't a large list of military issued variable power optics out there and none of those are in that price range. You might be able to get a aimpoint red dot for that price.
  9. Vlad G replied to KpdPipes's topic in AR Discussion
    Sure but i think that doesn't include the BCG or a charging handle. Oh and for the upper another option are the BCM blemish uppers which are pretty cheap if you don't mind a scratch or two.
  10. Vlad G replied to KpdPipes's topic in AR Discussion
    For my money (and others will disagree with me here) based on current advertised prices (and shopping for sales where you can) I would do it like this: Barrel BCM 16" midlength $230 (1/7 chrome lined) BCG BCM $140 Spikes Lower $85 ( plus transfer fees and such assume $125) Spikes Upper $100 A2 style front sight and a magpul rear sight $100 Palmetto's MOE lower built kit $140 MOE handguard $35 Nordic Tactical comp $35 (I like this because it works and it is .740 diameter so when fully pinned you can still take off the gas block if you want to change something later) Standard charging handle $22 (might as well spend the $40 on the BCM, but whatever) Assorted small parts (milspec barrel nut and handguard bits) $50 gas tube $13 That would be for me the BARE minimum and it works out to $990 (plus shipping). I would probably prefer a different upper and lower although I don't think there is anything wrong with spikes. You could probably save $25 on the BCG and get a spikes BCG, they say all the right things. I'd like a better trigger then whatever comes in the Palmetto kit but it will probably work but not feel nice. Depending on came in the Palmetto kit I might replace some of the small parts in them. You might be able to get the same or better bits from the Palmetto kit at about the same price by shopping sales, I'm using that as an approximation of what you might need/want.
  11. Vlad G replied to KpdPipes's topic in AR Discussion
    I couldn't care less, but find me one that is $650? I don't think there is anything wrong with the AR gas system but if you would like to buy a gun with parts which may not be made tomorrow or be replaced easily then go ahead. The reason I mentioned the $650 AK is because the odds are it was built better then the $650 AR, but maybe not.
  12. Vlad G replied to KpdPipes's topic in AR Discussion
    I rather they bought a $650 AK then a $650 AR, but yes I rather they be armed then not. And I don't even like AKs.
  13. It weighs as much as a glock 19, the ballistics of the round are interesting only with ammo you can't buy, and lots of things have low recoil without using an exotic round that costs twice as much as 9mm and can't be effectively reload it. Different is not always good, the safety is in the completely wrong spot. Oh and it costs $1000 for a gun you can't use with the ammo it was designed for. But that is my take, and people can disagree and still both be right, so if you like one, go right ahead.
  14. Vlad G replied to Underdog's topic in Handguns
    I frankly don't want any of them (although I own a fnp-40, almost by mistake) I'm just surprised that they chose to reinvent the mags and create such a complex matrix, but whatever floats their boat.
  15. Vlad G replied to KpdPipes's topic in AR Discussion
    That's for you to decide. For me 1000 rounds without cleaning is not running it hard, it is down right clean, I hate spending time cleaning guns. I don't purposely drop my gear in the mud but I've shot matches where the mud was over my boot levels and you can bet I had mud and water on my guns and certainly I don't worry about leaving it in the dusty twig heavy grass on the side of a berm between stages and so on. If all you do is shoot it from a bench then this is running it hard. If you are the kind of guy that like to drive a truck over it and then shoot a 3 day class, then what I do is treating it like a safe queen. I just want to know that my gun will work with the least amount of drama and effort from me.
  16. Vlad G replied to KpdPipes's topic in AR Discussion
    I wish I knew what those videos had to do with this conversation.
  17. Vlad G replied to KpdPipes's topic in AR Discussion
    Yet you are compelled to entertain it. Why, are you saying there is a different standard we should apply when it comes to things that contained the same 60000 PSI 3 inches from my face? Are you saying my eyeballs are worth less then those of the military and I can afford to use crappier steel in the bolt and a lower quality aluminum in the receiver? No, that is all YOU are going to do with it, please don't generalize. I for one also compete with mine, so if I'm going to pay hundreds of dollars of a match and travel accommodations I'd like for my gun to work when I get there. A single jam will lose me a match, I rather lose a match because of my skills not my equipment. Other people train with their AR and pay thousands of dollars for those classes. Its a good thing you live in a world where civil unrest gives you nice long warning and where purchasing a better AR-15 is a affordable and easy alternative when you do see bad times coming and the credit card machine or ATMs are working and the NICS system is functional and the vendor chose to come in to work to serve you that day. I hung around a gun shop on 9/11, it was interesting to say the least, even eye opening. But you are of course right, don't let me worry you. Odds are it will last work longer with less maintenance, have fewer problems and probably last longer. If you only shoot 500 rounds a year this doesn't matter, but it is like asking what F150 will do that a Ford Ranger won't do and if you need those things. The first answer is simple, the second is up to you to decide.
  18. Vlad G replied to Underdog's topic in Handguns
    Sounds to me like the used the exact same mags as the FNP models (at least based on capacity) so .. try those? Also they kept the FNP grip insert design which is a shame, S&W showed the world how to that right already.
  19. So why do you think it is a cool gun?
  20. Vlad G replied to KpdPipes's topic in AR Discussion
    sure .. Let assume it is indeed one of these http://www.dpmsinc.com/store/products/?prod=5632 minus the lower Barrel is not chrome lined and it is 1 in 9" 8620 steel bolt instead of 158 carpenter. This is actually an assumption as DPMS has refused to tell anyone what steel is their bolts which doesn't bode well no sights, not even a standard A2 front sight, F marked or not. You are automatically looking at another $150-$200 if you want to just not fire from the hip no mention of pressure testing for either barrel or bolt Given the care they put in the core bits making the gun go bang how much quality do think the put into all the small parts? Might have they shopped for the lowest bidder? Note that ONLY thing they claim is milspec the finish on the parts, not the parts themselves or the testing thereof. I'm not a gun snob by far, I don't care if they used a cheap stock and handguards and a plain pistol grip, those are personal choices. The quality of the barrel, bolt and sights are things you can't skimp on and 2 of those are dubious and one is missing. I'm in the process of building a gun from scratch for my wife and I have a good handle on what quality stuff costs right now, and if you don't want a fancy trigger but a decent milspec one, cheap magpul furniture, tier 2 receivers instead of the higher end ones but stick with good barrels, bolts, sights you end up spending about $800-$900. That's $250 more then the kit plus a receiver but you get a gun that likely to run for a good long time. Your choice really.
  21. Big loud dog, backed up by angry cats.
  22. Vlad G replied to KpdPipes's topic in AR Discussion
    I rather spend $300 more and get something NOT made at the lowest possible spec.
  23. For some reason nj.com won't let my password work even after reset, but someone should point out to this guy that the first amendment was composed when everyone was christian and the freedom of expression was standing on a soap box or printing hand bills. Clearly we don't need that anymore and it shouldn't apply to Jews, Muslims, Jedi, or internet media as all of these are now far past the original context.
  24. Vlad G replied to Bully's topic in Rifles
    Keep an eye on sales and such. Getting a laminated 700 or Savage 10/110 for around $500 is not hard, although realize that generally speaking you get a better stock with polymer/kevlar/whatever stocks then laminated ones now, as long as it is not the the cheapest base model stock. Check these out CZ 527 Laminated .223 $629 CZ 527 Synthetic .223 $525 Rem 700 Synthetic .223 $555 (Remington makes like 10 diff models for this in barrel/stock configurations) Savage 25 with an EXCELLENT laminated stock in .223 $602 etc etc etc. Keep an eye on sales, Cabelas Flyers, or even Dicks and you'll find these bellow those prices.

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.