Everything posted by Vlad G
-
Competitive shooting vids
Sorry, no relaxing on this issue. I'd like you to show me the video you are talking about but it is perfectly safe to rack the slide from the front without sweeping your hand, lots of people do it all the time. The reason I'm pissed at the video above is not because some guy does it, although that would annoy me anyway, but because some guy with a TV show, presumably trying to make our sport look interesting to the masses does something stupid and they don't even know enough to edit the damn thing in post production or at the very least use a different camera angle or something. Not only do they do something stupid on national TV, they are to damn clue less to know they've done something stupid and reflecting badly on all of us.
-
More problems, CZ
Sounds to me like some of your ammo was very very bad. I can't tell you which one but one of them is not burning correctly or at ALL, be very very careful. What you are describing sounds like the powder is not igniting and only very little powder is burning and the bullet is being driven out by the primer pressure alone. This is a recipe for disaster as sooner or later a round will NOT leave the barrel (what we call a squib) and firing the gun again will result in disaster. Your gun is probably fine as no overpressure or out of battery rounds were fired. That ammo needs to go back to the manufacturer because I don't think they are supposed to use corn meal for powder Oh ,, and those "smaller" holes on paper .. they weren't smaller exactly, its just that the slower moving bullet did tear as many radial tears around it and likely you had less of a black "grease" ring left on the paper as well.
- More problems, CZ
-
Grain Count?
I think as a rule of thumb it is better to forget bullet weight as measure of recoil in the same cartridge. There is simply no relation. The amount of powder and powder burn rate have far more to do with perceived recoil then anything else. From a physics standpoint there are two components to recoil, the part that happens before the bullet leaves the barrel, and the part that happens after. For the first part conservation of momentum says as forces push the bullet forward, equal forces push the rest of the system back. The problem is defining what affects the force pushing the bullet forward and how much of the work done by the powder is actually used to push the bullet. For a moment consider the idea of shooting a under caliber bullet through the barrel, and you will note that most of gases leave the muzzle without actually pushing the bullet. More of that energy goes into pushing the bullet if it engages the rifling. Then you have the idea how much contact is there between the bullet and the rifling, and how much reverse spin the bullet inflicts on the barrel and gun. Depending on the amount of powder and burn rate of the powder you end up with vastly different "feel" for the recoil even if you are driving the same weight bullet out the muzzle at the same speed. And then there is the second part of recoil, after the bullet has left the muzzle. Long after it has gone its marry way, the gun still has forces acting on it from the gases escaping. I'm sure everyone has seen slow-mo videos of a gun firing and all the smoke and flame and ejecta after the bullet has left the gun. What does that image remind you of? It should remind you of a rocket engine, because that is what you have. Shooting high pressure gases out of a small hole is how we put people on the moon so while those gases are leaving the barrel you are still exerting considerable pressure pushing the gun backwards. Again the amount of powder and burn rate will make a huge difference here because a more voluminous slower burning powder will generate more gasses and more recoil but a powder used in small quantities with a faster burn rate will generate less gas volume and ejecta (as a rule of thumb). You an take the same bullet weight, and shoot it from the same gun, at the same speed using two different powders and get vastly different recoil feel, generally speaking with faster powders feeling "softer". So the question then becomes why not always use fast burning powders? The draw back of fast burning powders is pressure. Because the burn faster they tend to reach their full volume and full pressure long before a slower powder but that means there is less time for the bullet to move forward and make more room for the expanding gasses. Anyway, the point of all this is that you can load heavy bullets to feel soft, or light bullets to feel soft, the questions is not the bullet weight, but how you move it and how fast you move it. This doesn't even account for the fact that recoil feel has a lot to do with acceleration (the rate at which the recoil gets delivered to you) then the total amount of force delivered.
-
Recreational shooting and lead toxicity
Most copper jacketed ammo still has an exposed lead base so you are going to get something that way. For the vibrator cleaners, I use a dillon one with the fully enclosed top and I use rice as media which in my experience been the LEAST dusty option, the fibers in the rice act like a damn magnet and hold everything in. Basically there is probably no one single factor to high lead levels, it is probably a lot of small things .. well besides eating old wall paint of course.
-
Recreational shooting and lead toxicity
Dunno but I figure there is a lot of concentrated residue of every damn thing bad in them, and then we use harsh chemicals. So I'd say were disposable gloves, and do it with the windows open. Or, like me, clean them only when they make you go "eww" when you see them.
-
Recreational shooting and lead toxicity
I've included a lead level test in my yearly blood tests. I've asked the doc to do it, explained why, and have been keeping an eye on it. I too am skeptical of indoor ranges, on the other hand I don't spend that much time in them anyway, so I figure the 10 times a year or less I use them is not really a problem, as I used to be there a lot more in the past and didn't affect me. I'll also venture a guess that the quality of the indoor's range air system is quite important to the math. Lastly, whenever I hear about someone with high lead levels I also hear about them reloading lead bullets. Presumably if it was just shooting them, people around them would be affected as much, but my anecdotal sample size says the reloaders themselves are affected far more. I don't load uncovered lead and I use nitrile gloves whenever I reload, just to be safe. Oh ... and I tend to NOT clean my guns, so I don't spend a lot of time with my hands in solvents and lead residue.
-
Competitive shooting vids
ARRRGGHHHHH first video, 2:55-2:58 moving with his finger on the trigger. ....
-
pics of happy dog...
The Iphone picture sucks, but at the time I was trying to breath, as he thinks he is a lap dog so he is kinda leaped on my chest on the couch, all 70lb of him
-
Shotgun extension greater than 6 OK?
NJ 2C39-1 , the definition of assault weapons includes "A semi-automatic shotgun with either a magazine capacity exceeding six rounds, a pistol grip, or a folding stock."
-
Rifle and Shotgun competitions
Topton in PA runs regular-ish rifle/shotgun/3 gun matches. Old Bridge runs one a year for each (approximately, sometimes they skip a year) Lots of other yearly 3gun/2gun type matches as well as dedicated rifle and shotgun matches but they tend to fill out early and need to register months in advance. For example West Point 2gun match is at the end of the month, New York State rifle Match a month after that, both are full.
-
Any nj shops stocking bcm or spikes guns/parts?
There are a number of people who will do reasonable transfers for you. Check out the Vendors forum?
-
Please stop buying Serpa holsters
No, you are wrong. However I'm done, I made the effort I needed to make for my own piece of mind, didn't really expect a different response, if you insist on using them and get hurt at least I'll know I've done the best I could to warn you.
- What USPSA really is!
-
Think this was fired out of battery?
.45 is relatively low pressure, you'd be surprised that kind of abuse that case can take without exploding.
-
Military-Grade Optic for $300-400 ?
How about it? They are red dots not amplified scopes. The better questions is what do you want this optic to do?
-
Military-Grade Optic for $300-400 ?
Some of the acog scopes have a location to mount an RMR red dot on them: http://swfa.com/Trijicon-ACOGRMR-Combos-C4196.aspx and no you can't find an ACOG for $500.
-
New York demands Patricia Finn surrender her list of clients
Correct me if I'm wrong but I thought there was no attorney/client privilege if the conversation was made for the purpose of committing a crime. In a case where you consult a lawyer on HOW to break the law I don't see how it applies. And seriously .. CPS is stealing children to sell them into sex slavery ... I'd think that would be a topic the author might be more interested in then some client/attorney privilege issue but apparently he doesn't have the space to go into it. Priorities might be slightly out of whack.
-
any fn five/seven users?
I don't see how he was hiding facts seeing how he stated what he was shooting. While I think it is slightly insane to reload for that cartridge, that failure looks like the gun fired out battery. A double charge or over pressure round tends to crack barrels, that flower of brass behind the barrel looks like a lot of the cartridge was not in the chamber when the trigger was pulled. Reloads or not the gun shouldn't fire out of battery. Now, I'll even go and say that maybe he screwed with the gun and disabled its disconnector, I'm not saying they all do that, but what shocked me how much destruction that resulted in. I've seen guns blown up before, right in front of my eyes, but I haven't seen a handgun decompose as much before or heard of one either. When you are handling as much pressure as a mild .223 in a handgun I think you need a bit less hand grenade.
-
any fn five/seven users?
Sorta, the AP round is actually a trimetal thing, the civilian ammo is now the v-max polymer tip stuff. What I mean to say and failed that the civilian ammo is classic copper over lead, where the original ammo like SS190 and its derivatives are actually aluminum and copper of a steel penetrator: http://en.wikipedia.org/wiki/FN_5.7%C3%9728mm#Varieties
-
any fn five/seven users?
Oh, also it is a VERY high pressure cartridge, basically rifle level of pressure in a plastic handgun. When they let go, they REALLY let go, check out this thread:
-
any fn five/seven users?
The 5.7x28 cartridge and the guns that fire it were designed with a high speed small armor piercing bullet in mind. Their purpose was to penetrate body armor at close range. However the armor piercing ammunition it was designed for is not available for sale in the US to civilians which means you can only use the standard full metal jacket ammo which is fine for plinking but misses the point of the design. As for the safety, if you think it is the right spot, more power to you, I maintain it is in the very wrong place.
-
Please stop buying Serpa holsters
I don't think such a list is a good idea because it ignore personal differences in grip styles and lengths or shapes of fingers or whatever design they change next week. The simple fact is that it design that is problematic and there are better options out there.
-
Please stop buying Serpa holsters
The Glock platform is not the only one with a problem, I actually own another one I can show with the same issue. As I can't play with every single holster/gun combo I'm hesitant to say there is a list of good and bad or what list would be tomorrow, but the design is silly and a bad idea. That was not the case I was referring to, I'm not even sure what holster was involved in that case, then one I'm referring to come to light from a conversation with other match directors recently.
-
Please stop buying Serpa holsters
Maks, I can't ban them and I don't plan to, the most I can do is make my concerns available to those I'm likely to run into at the range, hence this post. Dropping a gun is shooter negligence, nothing else, we don't have "speed holstering" but we sure have speed draws. Having your gun fall out of a bladetech tells me that someone adjusted that holster to not have any retention which could be done to anything. We could also talk about dry rotting leather holsters, screws falling out Safariland ones, or whatever other way you can make a holster fail when not used as directed, they point I'm trying to make is that the Serpa can work against when used as directed.