Everything posted by Vlad G
-
Old Bridge USPSA 1-22-12
One the first things that action shooting games teach you is to call your shots, ie: being able to tell if you hit and where based on where your sights were when the trigger broke. The only times I look at a target for my hits is when I have to take a head shot at relatively close range, otherwise you learn to trust your sights and your trigger finger, you don't have time to look at the paper while you are shooting.
-
Curious about .22 leverguns
I will say that my wife adores her Henry .22 youth model. She learned to shoot on a .22 lever gun more years ago then I'm allowed to mention without getting hurt or sleeping on the couch and she loves that the youth model fits her all of 5ft tall frame and works like a charm. Plus it has pretty nice figured wood stocks which is a pleasant surprise on a rifle at that price point.
-
Old Bridge USPSA 1-22-12
I can confirm that he did not KNOW the rules, he thought what he did was ok, which to me is pretty puzzling for someone who spends money on a custom gun for a specific game. Actual shooting starts around 10:30 and ends around 4pm. You don't have to watch the whole match as you can watch all the 7 stages pretty quickly. I would actually recommend being there around 9:30 and going through the new shooter orientation even if you don't plan on shooting so you have a better understanding what you are seeing.
-
Trimmed 500 casings of 9mm today.
Take a trip to brianenos.com, and in the reloading forum ask how many trim their pistol brass. Keep in mind these are the people that shoot more reloaded pistol ammo then any other group on earth. Or keep trimming it, your time is your own really.
-
Curious about .22 leverguns
Where there ever? All the manufacturers I can think of (Marlin, Browning, Henry, Mossberg) make tube loading ones. Who used to make a reciever loading one? It would seem to me with the fragile bullet design in a .22 that would be a bad idea. I think way back there were some made with a stock loading tube, but maybe I'm wrong.
-
What steel targets for steel core ammo?
Make sure you know the difference between core and jacket ammo. Steel jacket ammo is fine on AR500 past 100 yards. Actual steel core AP ammo will shoot anything you can be bothered to move downrange more then once so just use that on paper, but be aware that CJ might have a rule against its use.
-
New (old) Mark II--what to do before firing
If you plan to strip it, first make sure you have a copy of the manual. It's not you won't curse, you will just curse less. It is a wonderful gun except for that. I just spray them down with gunscrubber and add oil every 10k rounds or so. If you go the gunscrubber route, make sure you take the plastic grips off first, they can get damaged
-
Looking for my first 1911. Kimber, Ruger...or?
You are correct, my bad.
-
Pump Action shotgun Restrictions
It is a ford vs chevy kinda thing. I prefer the Mossberg and if you pressed me very hard to tell you why I'd say that I like the loading gate a lot better, and that I like the safety on the tang, and that I like the balance better, but to be honest the differences are not that big. I think if you are looking for a self defense setup with long tubes and sights other then beads the Mossberg might be cheaper too, but that might depend on the sale of the week. Handle both, see which one you like best, because there is no real difference between the two when it comes to reliability or effectiveness or after market support or anything else.
-
Looking for my first 1911. Kimber, Ruger...or?
The other thing to consider is what kind of extractor you want. The traditional 1911 extractor is internal and it works great when done well and terrible when it isn't done well. The problem is that doing it well requires hand fitting and proper materials and that is one of the areas where manufacturers have been skimping, you really can't get away with grabbing one from the parts bin and dropping it in. To solve this some of them have gone to external extractors (S&W, Ruger, Sig use external ones). The problem with that is that all of them make it slightly differently so once you go down that path you are starting to lose some of the dress up barbie aspect of the 1911 in respect to after market support, you can only buy replacement extractors from original manufacturer which sounds fine unless they stop making it. For the average gun and average shooter that is probably perfectly ok, odds are most people don't wear out the extractor spring or the extractor, but if you plan to shoot the a gun a lot (and I mean 10s of thousands of rounds) I'd prefer the classic extractor. Actually I'd prefer the classic one anyway cause it looks better but that is subjective. Consider this as part of the legacy of the 1911, which was designed in an era when everything mechanical was hand fitted.
-
how do you grip you sig da/sa
Odd, I never have a problem with the sig lever, and I use the same grip on anything. I'm also not all that worried if the slide doesn't lock back to be perfectly honest. Hell, I know competition shooters that completely disable that feature on their guns, though it sees silly to me.
-
how do you grip you sig da/sa
Proper grip is very important http://www.youtube.com/watch?v=nm9uG5bPubw
-
Steel Cased Ammo or Brass Only? Where?
What iron core? There is no iron core because it can't be imported with an iron core, it is lead. If you mean the steel jacket, take a pocket knife to it, you can cut through it. If you can cut through it with pocket knife it shouldn't do much damage to your barrel unless it is made of buttercups. Lots of things have been reported that are hard to check, this is trivial to check. Corrosion resistance.
-
Looking for my first 1911. Kimber, Ruger...or?
Come again? Would you like to tell that two the 20 or so other companies making guns here? They would be surprised to find out someone moved their factory over the border when they were out at the pub.
-
Looking for my first 1911. Kimber, Ruger...or?
And Chevy's are made in Canada. The Spartan is assembled in the US with decent parts. When you think american made you have to think differently if it comes to guns. A lot of the main parts are made by C&C machines, robots, etc, and if they are made to spec, I don't care where they are made The craftmanship and "jobs americans deserve" are in the assembly, fitting, etc and both Springfield and STI do that in the US for most if not all of their guns. There are 3 in the case at Sayreville Sportsman.
-
Guns for Competitive Shooting?
Shooting a real rifle cartridge at a any steel target at less the 100 yards is bad for your health, not to mention it will likely destroy the targets, 9mm mak is most definetly NOT in the same class as a 9mm. It is a smaller case with about 10000psi less pressure and a lighter bullet. It fires a 93gr bullet at a maximum of 1350ft per second where 9mm often fires a 115gr bullet at that speed, The 7.62x25 is also not the cartridge people think it to be. For one, the ammunition you can buy is not the ammunition it was designed for. The point of the cartridge was to be reasonably armor piericing my moving a steel core 85gr bullet at around 1650ft/sec, As you can't buy steel core pistol ammunition in the US, you are firing a FMJ 85gr bullet of about 30cal which is not exactly a wining combination as a defensive round. And then there is a issue of "energy" which for these purposes it is meaningless. In fact by raw energy numbers the ball 7.62x25 is a 20% better then 230gr HP .45 ammo and I beg to differ and so does pretty much everyone who cares about these things. Most shooting sports use the idea of "powerfactor" which is mass times speed instead of mass times speed squared. Back to the original questions however. There are a lot of shooting sports and they all have different standards. Most of the pistol "action" shooting sports like IDPA/USPSA/etc tend to mark the 9mm Luger and the 38spl as the bottom of the power curve and require a minimum powerfactor to avoid really light reloads. Steel also has .22 specific divisions. From your list the 795 with a few extra mags will work for the steel .22 rifle division, and the S&W for pretty much anything. I suppose you could shoot your Saiga in action rifle matches, though we don't have that many in NJ because of our laws, lots to chose from in PA if you don't mind driving. You can feel free to shoot action rifle matches with a lever gun, but don't expect to "win", it really doesn't matter how good you are with one, 130 years have passed since that design was cooked up, we've done better since. You mention purchasing a handgun you are not interested, out of curiosity what kind of handguns are you interested in?
-
Looking for my first 1911. Kimber, Ruger...or?
In my experience, if a factory 1911 breaks during a shooting match, it is a probably a Kimber. This is not to say that all Kimbers are ****, I just wouldn't purchase one. I would also avoid like the plague anything with a series 80's safety. If I was buying an of the shelf 1911 it would be a Springfield, STI Spartan, S&W, Ruger, in that order.
-
Times are gettin tough!
Forget hand press and dies, if you really want to stay minimalistic, Lee makes their Lee Loader which is basically a kit of bits that does pretty much what his nuts and bolts do, except it is designed per caliber and to be compact and reliable. Also requires a mallet I suppose, although I suspect a rock would as well.
- Times are gettin tough!
-
Trimmed 500 casings of 9mm today.
I have never trimmed pistol brass, and I own .45 brass that has been reloaded so many times the headstamp has worn off. If it makes you happy go right ahead and do it, but you are the first person I ever heard of to do it
-
CJUSPSA 1-8-12
The moving BEFORE you shoot it is the right way in my opinion. Once you know how to shoot it, a static star moves almost not at all if it starts still and it isn't much different then 5 static plates. I briefly considered doing it the right way, but it was January so considering possible weather I decided to be nice.
-
CJUSPSA 1-8-12
Thanx to Maks worn out fingers the scores are up. A number of score sheets did not have the time entered, not much we can do for those, those stages count as "Did not fire" also known as zero. If you score, make sure you have a complete score sheet, if you are the shooter also please make sure you have a complete score sheet. Also, I'll now sorta disagree with Maks on the star issue. When you get a bit more experience the star becomes a question of "Can you do it with 5 rounds?" not "Can you do it?" . However you don't get to do that by giving up when you can't do it. They are an expensive prop, even if you have one it still a pain in the a** to drag out to the range so you might as well get every bit of experience you can out of it. Yes, there is something to be said for not falling in love with a target you just can't hit and moving on, but that should be reserved for shots you KNOW you can't make that day .. say a 6 inch plate at 25 yards when you don't practice that kind of shot. Nowdays I reserve that option for some long range rifle shots in rifle matches.
-
Something bit my steel plate
Steel core or steel jacket? We've seen actual steel core AP stuff cut through steel like butter regardless of steel quality.
-
Shooting w/ Rx Glasses
I'll do a +1 for the curved glasses protecting the sides of you eyes not just the front SPECIALLY if you shoot with anyone else around, not just you in a pit facing downrange. I've seen splatter take all sorts of bizarre paths and hit people all over.
-
Something bit my steel plate
Don't shoot steel with a rifle at 50yards or you will chew it up. Even AR500 with water cut edges from MGM, GT, and they other big guys will do that with rifle rounds at 50 yards. With normal ammo, and personally I haven't seen the steel jacketed stuff any more damage then normal jacketed ammo, through lots of matches both as a shooter and as an RO. Most targets are spec'ed for 100yards or more with rifle ammo.