Everything posted by Vlad G
-
Sully vs. ACE stock
Nope greasing the spring does not make it deposit anything anywhere. Works like a champ. Obviously, don't throw a pound of grease in there, just grease the spring.
-
Sully vs. ACE stock
Just grease. I've used white moly grease, slide glide, mobil 1 synthetic grease, they all work. I've applied with the tip of the dispenser around each coil, or by sloping some on a rag and applying it to the spring. I'm pretty sure any mechanical type grease would work, I would probably not try Criso though, even though it may work Reapply every few thousand rounds. Also if you are 6'1 I think you would be crowding yourself and the gun quite a bit with the short stock, but thats up to you.
-
Sully vs. ACE stock
To each his own, I couldn't care less about the buffer noise when there is an explosion upfront, and to me the reasons I've outlined above are more important then random noise. Also, grease the spring the noise mostly goes away.
-
Sully vs. ACE stock
1) Dunno why you went for the HBAR but if you already ordered it, so be it. Lighter is always better, there is nothing wrong with government profile. 2) How tall are you and do you plan to wear body armor at all times? The short stocks are only really useful if you are really short or are going to have to use the rifle over body armor and associated gear. Both Raz-0 and I are tall folks (he a lot taller then most) so we prefer the longer stocks. The standard Ace ARFX is A1 length without the recoil pad and A2 with it. This would be my choice for a number of reasons. First it is VERY rugged and the correct length for most people. Second, the ultra light versions give no support to the buffer tube AND can shift because they are in no way stabilized, all that keeps them from rotating is a screw, and screws .. well .. they rotate. The longer stock makes for better balance for my taste. The longer stock allows you to use a full length buffer tube which is more forgiving in function and more pleasing in recoil characteristics.
-
hand gaurds
Do yourself a favor and don't buy a non-name upper. If you can't tell what they are even selling (and I can't because the pictures and text don't match) then I sure as heck can't tell what quality parts they put in. For the same money you can buy a Spikes upper which may not be the best stuff but it is decent stuff:
-
Revival at Smith & Wesson?
Actually I mean the "new sigma" the SD series and it is MUCH worse then a glock. The left one in the pictures is the SD, that is a stamped out, VERY rough bit of stamped metal that no polishing will ever fixed. The trigger pull has more stages that I could count without taking my shoes off, and about as heavy as my car.
-
Revival at Smith & Wesson?
Dear lord, yes. I took one apart to see its guts recently and I was horrified. Basically the "sear" if you choose to call it that is a bent piece of sheet metal integral to trigger bar as far as I can tell that just pushes backwards against the striker leg. I couldn't imagine such a layout outside prison made firearms but apparently it exists. No wonder the thing is sold for $100 to foreign armies, you can still make a profit on that which is scary.
-
Sully vs. ACE stock
I'm with Raz-0 here, I have an Ace and the numbers listed there are bogus, it does not weight 21oz, it would have to be made of tungsten to be that heavy. It is also VERY rugged, probably the most rugged stock around, you can probably pound tent stakes with one without hurting it or the buffer tube.
-
Revival at Smith & Wesson?
That would make some sense if you could actually buy one with a lock. Most if not all are produced without a lock or the silly mag safety. It is more of a SKU then an actual product as most shooters order the one without those useless bits and so do police departments. If they forced it down your throat, you'd have point, but they don't.
-
USPSA @ OBRPC - 10/23/11
Nope, but you do have to know the rules. We encourage everyone to pick up the timer, but realize when you do that you take responsibility for the safety of the stage and for the fairness of the game. So I encourage anyone to pick up the timer, but have a rule book at hand, if you don't know ask AND look it up to verify. They are done now.
-
USPSA @ OBRPC - 10/23/11
Not hard at all. And that is the kind of comment that give gun owners a bad name, when taken out of context.
-
USPSA @ OBRPC - 10/23/11
IF YOU ARE ARE A NEW SHOOTER THAT PLANS TO SHOOT BE THERE AT 9AM SO YOU ARE READY FOR THE NEW SHOOTER INTRODUCTION AROUND 9:30. I doubt I'll be the one doing the squading as I'll be building a stage and then likely doing the new shooter intro, but if you want to shoot together, collect ALL your score sheets and money and hand them to the signup staff AS A SINGLE pile. However, that many people might be an issue because a squad that big may present match running problems. Have a back up plan of splitting into two different groups. In fact have that plan at ANY match you attend because squading is always a challenge in match setup and the match director may have no choice but to break you up some, despite best intentions. Also new shooters may not get a choice where they get squaded. Most of you have been through this, but we squad new shooters with squads with lots of RO's because they always need extra help, and because generally speaking they have a lot to learn on the first match so we don't expect them to tape, reset, score, etc and we want to make sure we don't have a squad that runs really slow. That doesn't mean your giant squad won't work, ultimately it is up to Jim (the match director at OB) and he'll try to accommodate you if you come up with a large stack of score sheets, but the easier you make his life by getting everything together, the more likely it is you will get what you want. Before anyone asks, I'm was doing the CJ scores up until someone PM'ed about this thread
-
Top production handguns, USPSA Nationals 2011
Having shot the guns of past Beretta team shooters I assure you they are nothing like actual production firearms, and every single one of them chose to shoot something else as soon as they parted ways with the company. Yes top shooters could outshoot me with a muzzleloader, but at that level sponsorship makes a big difference in choice of tools
-
USPSA @ OBRPC - 10/23/11
Just a bit of inside information: because of the proximity to holloween the call for stage designs included a request for Holloween themed stages and mention of some decorations was made. So .. there may or may not be zombies. The match will be a USPSA match by USPSA rules so don't expect odd targets or anything like that.
-
What pistol caliber do you use for USPSA or IDPA matches?
I don't find the stock trigger THAT heavy, it is within expectations for a production firearm. With $50 of parts it becomes damn good.
-
ordered a chronagraph
It depends. I've only used my shooting chrony indoors at Old Bridge which has bright light over the firing line and then I used the defuse screens. Mostly I use it outdoors and there you want LESS light, you don't want to use them on very bright days because the screens do nothing unless the sun is directly above them and it never is. I prefer cloudy but not darkened days for chrono time, with the screens off. I can tell you that mine is darn perfect, its velocities matching those recorded at major matches with 2 to 3 expensive chrono's in a series. And that is after I put 2 .223 caliber holes in the housing of mine. Oh yeah, don't shoot it, it is easier to do then you might think, specially with an AR.
-
Roxbury gun trial tomorrow
It is also my understanding that in NJ if the police officer has to ask for permission to search you car then he doesn't have probable cause and the search may not stand up in court anyway. I could be wrong.
-
What pistol caliber do you use for USPSA or IDPA matches?
You were lied to, what exactly were the complaints?
-
What pistol caliber do you use for USPSA or IDPA matches?
.40 S&W in Production. I can be loaded to be softer then 9mm at the same power factor, makes bigger holes, and you can get full size magazine in NJ as most of them are 15rd instead of buying 10rd 9mm mags for guns that normally hold 17rd. If you handload the difference in price between 9mm and .40 is negligible.
-
Bass Pro Shop In Sayreville
The Sayreville lot is very close to the Parkway, 287, and the Turnpike, it would have easy access without dealing with Rt1 and such.
-
Topton 3man team, 3gun match June 19, 2011
It was a blast last year. Going again this year.
-
Bass Pro Shop In Sayreville
and there was supposed to be a Cabelas at the medowlands .. As a Sayreville resident I'm not sure how I feel about this. I'd like a decent outdoor store near by, but not sure I want the extra traffic. On the other hand I know my town officials, they can screw up anything, so until they open I won't hold my breath.
-
USPSA Central Jersey - Sunday, June 12th.
And it turns out the weather was decent, unfortunately we need to make these decisions the night before.
-
USPSA Central Jersey - Sunday, June 12th.
Sorry guys, we are canceling the match. The weather predition for the setup hours is pretty bad, and we are also missing a lot of the regular helpers. If it was only one of those things we would have had the match but it looks to me like we can't do it this months. Sorry and see you next month.
-
Whats wrong with this photo?
Flip-flops should be outlawed. You should have to get a permit like the FID to wear them. Yes, I'm kidding about the outlawed part, but I hate them with a passion.