Everything posted by Vlad G
-
How are you preparing for May 21st?
Its been rescheduled
-
USPSA Old Bridge 5/22/11
Yup. The other newbie DQ'ed on Slav's stage but I was the one to give him the bad news. As always feel bad, but it is better for him and everyone else that he learn safe gun handling now, rather then later. My earlier comments where kinda tongue in cheek, I know the match was good, but when I see people complaining about start times, chairs (Really Maks?, yes I know (or hope (yes these are nested parans, deal with it(I'm a computer programmer, they don't scare me))) that you where kidding), parking, etc, I like to remind them that those are the little things in life. We treat everyone like grown ups and trust them with guns, if they can't figure out how to park in a way that doesn't take up the entire range, there is no amount announcements and reminders that can fix that. Unless someone is volunteering to be a parking attendant? We fully understand when people can't show up early and stay late. We know they have lives, so do we. We appreciate any help we get, either building, RO'ing, whatever. Without you guys these matches wouldn't be what they are. Yes, we get grumpy and tiered and irate sometimes, but we don't forget that most people do their part. Every now and then we get some people who think of this as a "payed service" and that their $15-$20 entry fee means they get to file a customer complaint. This is easily solved by putting them in charge of fixing the problem they discovered, they either fix it or shut up.
-
What do you use on Mags
Use a light coat of your favorite oil. I remove rust spots with steel wool moist with CLP. Oil in mags is not that much of an issue unless you soak them and now you just pick up more dirt. As a side note I clean my mags when I can hear sand/rock moving inside them, the outside when it gets rusty.
-
Mosin 10 Round Mag
Just like the scout rifle
-
USPSA Old Bridge 5/22/11
You know, you all make it sound like the match was some huge unpleasant chore, if I were to listen to all the complaints. Suggestions all welcome and such, but lacking offers to volunteer to implement them and actually help, they will likely be filed in the circular filing cabinet. It is a volunteer sport, everyone who works their a** in the morning also pays their match fee, and don't get payed to do it. It seems that 97 people find it cool enough, and yes when 97 people show up things get a bit slower. I'd advise you contact Jim or Dave and volunteer to help, if you actually want to improve anything. Keep in mind that we've been running these match for some time now, have scored thousands of stages, and have tried hundreds of suggestions. It is easy enough to say "you should x" and "you should make people do y" until you are the guy that needs to break his back doing x or getting all frustrated harassing people to do y.
-
USPSA Old Bridge 5/22/11
I encourage you to volunteer to score. It isn't hard and one of the easiest ways for a new shooter to do a bit more then just taping.
-
Cleaning Pistol Brass
I much prefer it. A lot less dust, and cleans really well. When the rice gets the right kind of gray, you throw it out. On the first use I add a spoon of brass polish, and thats all it needs.
-
USPSA Old Bridge 5/22/11
Thats good. You'll never hear me complain about that. We can adapt to more shooters, my guess is that with some changes OB can handle about 120 shooters, and CJ about 90. Beyond that it become an impossibility without dedicated RO's (who would have to shoot on a different day and have lives too, so thats almost a non-starter), more pits (which has issues with permits, building codes, financial), or some form of miracle. However to sustain 100 shooter matches will take shooters actually cooperating to keep the match going and more people learning to RO, run scoring, etc, and extra volunteers to fill in the 20 different jobs that need to get done every morning. Match staff tries very hard to make thing seem easy, but every match takes 5-10 hours of prep BEFORE the day of the match (sometimes more), showing up at 7:30-8am, and we often do not get home until 8pm. And then there is the post match work of scores, classifier submissions, prize checks, reports to the parent club, etc. Don't forget we'd like to shoot the match too and have fun doing it, but half the match is spent running around solving problems.
-
USPSA Old Bridge 5/22/11
As it gets hotter people start slacking off and rather hang by the pool. Did you miss the part where we had 97 shooters to organize and squad? I don't think anyone was expecting that many people. Just getting that many people signed in, squadded (everyone want to shoot with their buddies, but you can't have 30 shooter squads, and then you have people who DONT want to shoot with people they don't like, and then you have to make sure you have enough RO's on each squad, etc), figuring out which squad starts on what stage to make sure the match flows relatively well without extensive backups, etc, etc, these things take time. Stage builders show up at 8am and rarely finish building before 9:30. Then the match directors have to walk the stages and make sure they are safe, correct a target here, fix an activator there, add fault line over there. We could put on a crappier match and start on time. I rather we keep put on a match that gets compared with the nationals or area matches then start 30min earlier.
-
USPSA Old Bridge 5/22/11
Parking can solved rather easily if people start actually parking they way they do in a parking lot, not with 3ft of space on either side. Lets be realistic here, we get that many people almost never. As far as Jim can tell this was the HIGHEST attendance at a USPSA match at Old Bridge since we hosted an Area match a decade or so ago. It is not a common problem. If it becomes a constant then we'll have to change some things to accommodate people.
-
USPSA Old Bridge 5/22/11
Well if more people volunteered to build stages and more people showed up earlier to build them, that might work. BTW big thanx to KpdPipes for helping me in the morning get my activators to work and build my stage. One of the problems with building interesting stages is getting activators to work reliably, figuring out angles, etc, takes a bit of time. Stages often take 1 or 2 hours to build if they are complex.
-
What choice for a 2nd gun?...
Your second gun should almost always be a .22. They allow for lots of cheap practice, good gun to introduce others to shooting (specially wife/girlfriend/etc). Every one needs a couple at least one .22 pistol and one .22 rifle. If you get 2 of each, you are screwed, they tend to breed and then you have a safe full of .22s and you ask yourself how the hell you got there.
-
USPSA Old Bridge 5/22/11
We had just shy of 100 shooters (I think 97?) and 7 demanding stages. For my part I shot a couple of stages well and crashed and burned terribly at the rest, I did not have a very good match performance wise, but enjoyed myself hanging out with good people.
-
How are you preparing for May 21st?
Yeah but who trusts the media, they are lying I tell you.
-
Magpul UBR...does this need to be pinned?
Small thread drift here, but if someone is aggressively following you and you don't know why, don't bring them to your house and family, even if there are guns there. Have them follow you to the police station. I'm all for personal responsibility and all that, but right now the guy fallowing you may not know where you live. Why change that?
-
How are you preparing for May 21st?
Its ok, those are politicians. Sorry, they frown upon being shot, so don't do it.
-
How are you preparing for May 21st?
Lactose intolerant diabetics.
-
Polish designed anti-zombie house...
The pictures show solar panels on the roof.
-
Polish designed anti-zombie house...
That's a zombie house designed by a liberal. I know this because it has no firing ports.
-
Army M4 replacement RFP
I actually suspect this was written because they are tiered of hearing from Congress and press that the M4 sucks. Someone went and said to themselves "Fine, shut up, we'll just ask for the ideal damn gun, no one will have one, so then we can tell the retarded junior senator from Blowmetana to shut his pie hole".
-
Army M4 replacement RFP
Someone getting butthurt in 3 .. 2 .. 1.. Additionally there is this gem in that document I linked: 140db Unsuppressed?? Thats more then a .22 and less then any other cartridge, including slow pistol rounds. They can't be serious.
-
Places in NJ that will Teflon coat my M&P?
I've always subscribed to the notion that you shouldn't be concerned about the guy with a safe full of pretty guns, but the guy with one gun with the finish worn off is the guy you have to watch out for, he probably knows how to use it. It's a tool. If you don't refinish your hammers and screwdrivers, I wouldn't refinish a gun unless its rusting or is truly some form of "art gun" you had built. An M&P is great gun, but don't sweat the finish, shoot it some more until it is evenly scratched up and beat up.
-
A Tale of Two Stories
I've never loved the sheepdog/sheep/wolf triangle. I understand where it comes from, and I agree with generic sentiement but I think it oversimplifies. Grossman's write up pretty much implies that only military and police can be sheepdogs. There is a decent rebuttal to that point of view which concludes with something that resonates a lot more with me then the original premise: On the original topic, I give you this: http://www.palmbeachpost.com/news/crime/drivers-in-west-palm-delray-shot-in-bump-1484615.html
-
Springfield 1911 Magazines from the Coupon When you buy a gun??
The base pad is that metal or plastic bit at the bottom of the mag. Besides keep the guts of the mag inside, and allowing the guts to come out for cleaning, it also serves different purposes on different mags. For example on SOME 7/8rd mags it also acts as the stop to prevent over insertion, butting up against the front of the magwell (where it is a machined a bit higher). On a 10rd mag that is done either by having a "wrap around" mag base pad (like the CMC power mags do) or with a weld on bit of steel on the front of the mag like the Wilson picture above. The the base pad assists with getting the mag into and out of the gun with a bit of speed, it allows you to push on it with the base of your palm to make sure the mag is sited. A slightly extended base pad is critical if you have any sort of magwell addon on your gun (like a lot of the factory guns do now) because otherwise you need to kinda stick your hand inside the magwell to get the mag sited, and extended mag base pad makes that easier.
-
Tetra Gun Grease!
Tetra works ok, but I much prefer SlideGlide. Same principle, better implementation, IMHO.