Everything posted by Vlad G
-
Proper Lubrication of a Handgun?
Slide glide is a completely different beast then Tetra, and it works very well, specially on guns that have long slide to frame surfaces (1911's, CZ's, etc). It doesn't make that much of a difference on short rail guns (M&P, etc) in my experience.
-
AR Parts Accu Wedge
The Demon ones dont require a tool, one comes with a latch, the other can use a case rim.
-
AR Parts Accu Wedge
They don't do much. The upper to lower fit are not that critical to anything, and you are justing adding bits of rubber that can break and get into your trigger group. If you really want to tighten up your upper to lower, then take a look at JP rear tensioning pin or the two different ones that Demon Tactical offers
-
USPSA @ Old Bridge 4/24/11 Easter Sunday
Something that was told to me early on and which I repeat to new shooters is "You can't have to much ammo, unless you are swimming".
-
Pistol brass of differing lengths
Well not every turret is solid. For example the Dillon 550 tool head is floating, and that's on purpose. It is square, with the seating position diagonally opposed to the resize/deprime station. At the bottom of the stroke there is pressure on all die stations. I can imagine that if the resistance of depriming/resizing varies from case to case (because of brand, grit, primer pocket size and tension) then there could be a slight tipping of the tool head affecting the seating depth across the tool head. Of course it is also possible at the bottom of every stroke the tool head is fully flush against the upper lip of its channel an no tipping can possibly happen, but when you have a floating tool head I suspect some variation can and will happen based on its movement.
-
USPSA @ Old Bridge 4/24/11 Easter Sunday
Don't hate the star, it is a VERY good target to practice on and frankly one of the most practical targets we have. Think about it, a 8" target moving about quickly, sometimes in unpredictable ways, thats a good target to know you can hit. As for the round count, the reason you want 51 round on you, is not because you are going to shoot every one of them, but because you might miss, you might want to reload your gun BEFORE its empty (and dump some half full mags on the ground), because a mag can break, because you can fumble a reload and drop a full mag and you want to go for a fresh one instead of shaking dirt out of the one you dropped, etc.
-
Thinking about getting into Reloading
You can get SOME stuff locally, but basically the internet is your friend. Some guns shops will carry primers( Sayreville Sportsman), some will carry powder and primers (Solomon's) and most will carry nothing at all. Most serious reloaders but stuff mail order. Take a look at Powder Valley, Wideners, Midway, Precission Delta, Montana Gold, etc
-
USPSA @ Old Bridge 4/24/11 Easter Sunday
for production you should plan on using all of them. Basically start with on in the gun, and 5 on the belt.
-
USPSA @ Old Bridge 4/24/11 Easter Sunday
normally 60-70 shooters, 7 stages.
-
scope Savage 10 FCP-K
http://swfa.com/Burris-3-9x40-Fullfield-TAC-30-Tactical-30mm-Rifle-Scope-P12599.aspx http://swfa.com/Burris-3-9x40-Fullfield-II-Tactical-Rifle-Scope-P5968.aspx http://swfa.com/Nikon-45-14x40-Buckmaster-Riflescope-P42210.aspx http://swfa.com/Vortex-25-10x44-Viper-HS-30mm-Rifle-Scope-P48288.aspx However .. You need to spend money on decent mounts too. It is not unreasonable to spend just as much on glass and mounts as you spent on the rifle, and often a lot more.
-
How do you guys practice for USPSA
My take is that you can practice draws, reloads, transitions, leaving and entering shooting positions, and awkward shooting positions with an empty gun at home. For everything else shoot matches. Between OB and CJ you can shoot a match every weekend if you include the indoor matches at OB.
- Sig vs HK
-
Sig vs HK
I own a Sig. I want to own more of them someday, particularly a P220 . I actually held the older Sigs and the newer Sigs. The older ones did not rattle, have buggered grip screws, have gravel dragging triggers, have finger print rust stains on them from being handled in a gun shop, had working slide take down levers. These are all symptoms I've personally witnessed, and been able to compare with my existing Sig. Are all new Sigs like that? No, of course not, but it made me go ahead and do some research in the corners of the internet that are still pretty picky about who they allow to voice opinions and where people who wear out guns are common. And I found the same answers, recent Sig handguns have QC issues. Yes you can tell me I should go out and buy every one of them just to make sure because nothing else is absolute proof, but thats a bit absurd no? In theory they've solved some of those issues (particularly the take down lever one) but if I walk into a gun shop or if I order one I have little idea if the one I get was made this year or last year, or whenever. So personally, although I've always wanted a P220 I'm going to stay away from them a bit longer until the examples I see on the shelves are consistently better quality. Hell, I'm actually a fan of the Sig design, and although I usually stay away from DA/SA setups, theirs is the one I like best.
-
hackensack legal loophole
It seems to me that chief of police is a roll not a title: I'd say if he has the job described above and he as appointed by the Mayor and town Council then his is the chief of police
-
Sig vs HK
Thats a bit of a laugh. First, do you have a reference for that? Second SOCOM goes through handgun models like you wouldn't believe. Hell, they even had the huge H&K MK23 for a while which was a bit of a failure. Lastly SOCOM is many different groups, and for example the Marines which are part of SOCOM keep buying 1911's in MEU(SOC) format.
-
Sig vs HK
Maks, remember that just because we shoot certain things in competition, it doesn't mean we don't own OTHER things. I actually own a Sig, and I've played with a few H&Ks. In the long run, everyone I've known who owned an H&K has eventually sold it or put it in a safe and stopped using it. Older Sigs are great, newer ones have serious QC issues. I've always wanted to add P220 to me collection, but right now I would take one if you gave it to me.
-
.45 ACP Semi-Auto
No I don't own one, I've just seen lots of them fail. Indeed their higher end models work better, and I'm sure plenty of them lower end ones work fine too. Its just that from all the factory 1911s I see, the Kimbers fail most. Mostly it seems to be feeding/extraction/ejection issues. I haven't played with broken ones a lot, but the couple I tried to diagnose for their owners seemed to have crummy extractors (which can account for all the 3 symptoms).
-
.45 ACP Semi-Auto
I'm going to advice steering clear of Kimber, their reliability is not what it used to be, Springfield does a better job at around the same money or less.
-
NRA shooting clubs in NJ
To be honest the NRA doesn't really have a lot to do with competition anymore. Bullseye is pretty much their last stand. You can shoot bullseye at almost every club, Old bridge, Central Jersey, etc. I do recommend that you also look at the many many other disciplines out there. I have nothing against good old NRA, its just that they spend a lot more effort on politics then they spend on shooting, and that's great, but their involvement with competition shooting is now minimal.
- Sig vs HK
-
Eye Protection question
Thats for you to decide. If the kind of shooting you do doesn't end up throwing crap back at you (like shooting steel targets does) they may last you a life time. For me, they don't.
-
USPSA @ CJRPC (Jackson)4/10/11
Scores are up. It took me FIVE hours. FIVE. This because apparently at this match half the people didn't bother to add the number in the columns and the other half added it wrong. Math is hard.
-
USPSA @ CJRPC (Jackson)4/10/11
Huh? PM me your real name, and I'll see whats what.
- Sig vs HK
-
USPSA @ CJRPC (Jackson)4/10/11
Basically part of me doing paper work is processing your app to USPSA, and then USPSA takes about a week to get you your packet. Worst case scenario the whole thing takes about 5 weeks, and that depends on how slow I am.