Everything posted by Vlad G
-
Looks Like A Terror Attack In Paris
Ya'll are also assuming they've hit real targets instead of some random buildings to show they are doing something ...
-
NEW HK VP9 LE
All guns break in some fashion or another, and although I'm puzzled about zee german engineering that came up with that, I wouldn't worry to much about. Name a gun, any gun, and someone will be able to tell you the specific ways in which it breaks, and they are not even wrong. Enjoy your gun dude, forget what other people think. Eventually you'll end up owning multiples and like different features for different reasons.
-
Looks Like A Terror Attack In Paris
I'm willing to bet the Foreign Legion is spooling up and may be involved soon.
-
Lights out by Ted Koppel
if you have that problem, turn the water off at the main shutoff or even the street and only turn it on when you need it.
-
Looks Like A Terror Attack In Paris
You forget the Europeans have a long history of pogroms. It will be very interesting how they react.
-
Looks Like A Terror Attack In Paris
Well, if anyone can go from zero to jackboot in 5min flat, it is Europe, they have the experience. They might need to.
-
Easton now three gun only as of march.
Any idea who's 3gun rules they would be using?
-
Arrest for the 16th round
You guys are worse than a sewing circle. My advice is to NEVER believe a gun shop story.
-
Who wears glasses?
Red dots are not a solution to aging eyes. They mask the problem but won't help you with depth perception, quick focus on different targets, differentiating targets from crap around them. Get good shooting glasses with correct prescription, preferably something with digitally done lenses that work to the sides of the lenses. No, they are usually not cheap, but if you get them in the correct shade or transition type lenses you can wear them driving, doing the lawn, whatever.
-
HexMag Failure
I don't feel either way about hexmag, but they have been continuously updating their mags, with the older one having issues they fix in newer ones.
-
Denied by NICS how so??
Its a pretty f'ed up system when the state gives you a license after they supposedly check you out and then your check fail. I wonder if the change of address is what is throwing a red frag as in maybe the town knows but the state police doesn't? Obviously you have to follow up and as much as it sucks I would actually bring a lawyers on your side, one who knows guns in NJ. It may cost, but this is not a joking matter.
- Freedom Munitions and their reloads.........
-
AR bolt sticking inside carrier?
Err not really. The springs are stiffer and shorter in a the shorter recoil system so they will fit, it has nothing to do with the gas port pressure. The AR system needs X amount of gas delivered over Y amount of time to function, but there are many variables at play. The gas port is not equally sized on a 14.5 barrel and on a 20" barrel. For example the Colt specs call for 0.093 gas port for 10.5" barrel, 0.063 for a 16" barrel, a 20" barrel will be 0.086" etc. This are calculations based not only on the length of the gas system but also on the remaining dwell time of the bullet past the gas port and expected pressure at the gas port. A properly built barrel with a proper size gas port for its length will actually let the correct amount of gas into the system to operate the gun. In theory, the spring rate and buffer weight should provide the correct amount of resistance to slow down the carrier and return into battery, regardless of the type of recoil system. Of course these are all in various ranges. The gas port sizes I gave are the small side of the spec, and there is a high end of the spec and there are barrels made out of spec. A lot of barrels tend to be on the sloppy side of gas port sizes because as a rule of thumb it is probably "safer" as in the gun will run with crappy underpowered ammo more reliably. If you were building a gun for 5.56 only you could get away with much smaller gas ports. Thus people end up adding heavier buffers to their carbine systems to slow the thing down a bit when the guns are over gassed, and end up with H3 buffers which weigh as much as the rifle buffer does. This is from someone who runs a rifle buffer system, with all the weights removed from the buffer, and every one of my uppers will run on it, from the 18" competition setup with lightened carrier and undersized gas port running both 2500fps 55gr ammo and 69gr ammo 2850fps, to the 14.5" setup with full mass carrier running 5.56 full power ammo. All the uppers also run on my standard H1 buffered carbine lower. It isn't about the lower, it is all about the upper being properly setup to put out the correct amount of gas. A lot of the advise about buffer weights and stuff like that is because of over gassed uppers, in my experience.
-
Solar?
Sorry that makes no sense. Those panels will be absorbing huge quantities of energy that would otherwise go directly into your roof. Additionally they would take the direct impact of weather. Of course the shingles would last longer and the attic would be cooler. Any energy removed from the roof is a plus. When you deal with these "we'll do it for free" place .. what happens when you sell your house? Is there some contractual obligation to the seller before the 20years or whatever is over, and is there any contractual component that might make it less likely or someone else to want to buy the house? A house with a paid off solar should in theory have a higher value, but when it is under a contract, that could be odd.
-
Some advice please
if we want to be really pedantic about it, the M1900 which was the first incarnation of what we now think of as the 1911 platform was designed for the .38ACP which is dimensionally identical with the .38 Super. The .45 ACP was designed to fit the basic frame and work in the same basic designed gun (M1905). The 38 Super was then re-introduced as a beefed up version of the .38 ACP. So TECHNICALLY, the 1911 platform was designed around a .38 not a .45
-
AR bolt sticking inside carrier?
Hmm, maybe, but it hasn't been my experience. I've ran carbine length gas systems on rifle recoil systems, and rifle gas systems on carbine systems with no issues. If you mean that what is inside the receiver extension needs to match the receiver extension (ie don't put a carbine buffer in a rifle extension or the the other way around, same with springs) then absolutely, that matters.
-
AR bolt sticking inside carrier?
It's all cool, I just though I misunderstood you. All AR uppers are exactly the same size (assuming you don't wonder into 308 ones). If in spec, you should be able to slap any upper to any lower, and they should work, regardless of recoil system. Think of it this way, it's not as if they make different lowers for carbines and rifles, and the pins are in the same place regardless
-
AR bolt sticking inside carrier?
Nah, drench it. AR's always run better when wet. They'll be ok dry most of the time buy they are happy wet. Like messy wet.
-
AR bolt sticking inside carrier?
Well if you are not seeing shinny aluminum when you clean the inside of the upper then don't worry to much but keep an eye on it. Also lube the CRAP out of that thing, even a think coat light grease on the contact pads wouldn't be a bad idea.
-
AR bolt sticking inside carrier?
What? the upper is the upper, it has no special lengths.
-
AR bolt sticking inside carrier?
Hmm .. I don't think it is just finish. The wear is only on the rear of the pads and it looks "bumpy" is if the pads are making unequal contact. Plus keep in mind the finish might be crap, but that is steel under there and the upper is not. If there is wear on the carrier, whatever it is wearing against is also taking a beating. Do a careful inspection of the inside of the upper and see if you see any wear.
-
AR bolt sticking inside carrier?
That's a good point, some of that wear is really jittery. What kind of buffer tube are you using (rifle or carbine), what buffer, and what recoil spring?
-
AR bolt sticking inside carrier?
I'm a bit concerned about the wear on the bearing surfaces of the carrier. I have carriers with 25k+ rounds with less wear then that.
-
Some advice please
QC has been a problem with them over the years. Lots of people had issues with the platform. It is possible they've cleared that up by now, but even beyond that all the gun has going for is price. It is a bit of a red headed step child in the sig family, and the 320 is probably a much better thought out polymer framed gun, although it is striker fired instead of hammer fired.
-
Some advice please
Usually that is true, but the 2022 is the exception to the rule.