Everything posted by Vlad G
-
Some advice please
Shrug. The entire point of making handguns smaller is to allow them to be carried discreetly. There is no other upside to reduced size, it reduces capacity, it increases felt recoil, reduced sight radius, reduce ballistic performance, reduce grip surface available for shooter to gun contact, etc. Seeing how their one and only upside is not relevant in NJ given our current laws, it makes no sense to recommend one to a new shooter (I'm assuming the OP is new based on his recent FID, for all I know he could have 20 years behind the gun, but then I doubt he would be asking for advice). Unless your really want one based on how they look, because there is nothing wrong with that, but one needs to understand the downsides.
-
AR bolt sticking inside carrier?
Of course you have to pull the firing pin. It passes through the cam pin so you can't get the cam pin out with the firing pin in it, which means you can't get the bolt out. While you are taking pictures, take a pictures of the bolt removed from the carrier as well.
-
Some advice please
You do whatever you want, the man asked for advice and I offered it. I have yet to meet a single person that shoots a compact or subcompact as well as they can shoot a full size gun, or at least not if they are good at shooting handguns, I suppose someone can be equally terrible with both. Telling a relatively new shooter to use a small gun is generally a disservice. The OP already stated that the primary uses are home defense and range shooting, not carrying in a place of business. I can make up all sorts of scenarios in which something is better then other, but given the parameters provided small guns are a bad idea. You feel free to disagree if you wish.
-
AR bolt sticking inside carrier?
The bolt's movement is limited by the cam pin. I don't know what you mean by the bolt turning all the way or pressing all the way into carrier, it shouldn't. The bolt rotates about 25 degrees and moves back only as much as the cam pin moves back. If it moved "all the way" the bolt lugs would hit the carrier and that would be bad for them. What ammo are you using? Does the ammo plunk freely into the chamber (if you take out the carrier) and does it fall out freely if you tip the barrel muzzle up? With the carrier out of the gun, does the bolt pivot freely inside the carrier (or as freely as the cam pin allows)? It shouldn't take a lot of hand pressure to make it move. Take some pictures of the carrier group outside the gun and on your ammo, both new rounds and maybe some fired brass and post them.
-
Some advice please
First, avoid the sigpro. Not worth even looking at it. Secondly why are you looking at compact guns? This is NJ so you don't get to carry it, so go to a full size gun which are always easier to shoot and shoot accurately then the compacts with short sight radius, snappier recoil, smaller grips, etc.
-
AR bolt sticking inside carrier?
Also, your thread title says bolt sticking inside carrier? Do you mean that, or did you mis-describe the problem?
-
bump fire grip, not a stock
Why if they are cheap? The whole point of them is to separate you from your money as quickly as possible via ammo expenditure, who cares how much the doohickey costs.
-
Broken grip screw
Lets play a game of "Spot the gun dealer!". Hey, I just won! This should also be your answer for "my gun locked back empty, how do I get more ammo in it?"
-
Broken grip screw
Also, some heat applied to the frame might come in handy. If there is a lot of thread locker there the heat may break it down a bit plus possibly expand the hole.
-
Broken grip screw
worst case scenario, there should be a lot of frame around that screw so drilling the whole thing out, slightly expanding the hole and rethreading it should be workable option, although it will leave with non-standard grip screws.
-
Broken grip screw
How did it break, by which I mean is it broken enough that you can get the grips off? Did the entire screw head come off? If you can get the grip off, you should be able to VERY gently cut a slot into the remaining bit of the screw and try to remove it. You could also try to drill it out very carefully with a drill bit smaller then the diameter of the screw, which should weaken it enough to get it out. You could try JB welding a nubbin on it that you could grab with plier. Is the screw extending past the frame on the other side and can you grab onto that?
-
CJ USPSA Nov 8th
Registration is now open: http://cjuspsa.coffeecup.com/forms/CJ_11082015_Form/ As always I could use some stages and help putting them on the ground
- CZ75b
-
Are you content with 10 round magazine 9mm?
- Are you content with 10 round magazine 9mm?
That's like saying why should you learn how to correct a car skid, drive though snow, or recognize hydroplaning when you only plan to drive a car on sunny summer days. Because it is a skill worth pursuing and one day you might need it. Why should you learn how to be a good golfer when you can just hit balls at random. Why learn how to hit a basketball instead of just bouncing a ball? Why learn how to reload quickly? Because one day your gun might jam after one round fired, and you really need to get more in there RIGHT NOW. Because maybe one day you'll hit the mag release when you don't mean to. On the other hand, if you just enjoy plinking at targets why worry about a 9mm? .22 is cheaper. So are pellet guns.- Are you content with 10 round magazine 9mm?
Legal bullshit aside, you would be shocked what someone competent can do with 10rd. USPSA Production divsion is shot with semi-stock guns, in 9mm, with 10rd maximum. Just in case you think that holds anyone back ...- M1a - Scout/Squad or SOCOM?
I should mention that what accessories you hang from your rifle does not determine what rifle you should buy. That's like deciding to which car you are buying based on what aftermarket wheels and ground effects you can fit to it.- M1a - Scout/Squad or SOCOM?
Understood, if you just like the gun, then buy it, nothing wrong with that at all. Although it isn't a simple action- M1a - Scout/Squad or SOCOM?
I think for a lot of people it isn't a question on cost but one of value. The OP is not interested in a AR-10 derivative, but today you get a lot more value for your dollar from that platform, and possibly the other platforms as well, depending on what is important to you.- M1a - Scout/Squad or SOCOM?
Saiga? BAR? R1? Rem 750? FNAR? SCAR? Super VEPR? 308 Garand?- NORAD blimp comes loose from tether
All I know is that my tinfoil porkpie hat has been twitching a lot less since the balloon went on walkabout.- NORAD blimp comes loose from tether
I'm going to rush to arfcom and start a thread named "What caliber is best for giant wayward zeppelin?"- M1a - Scout/Squad or SOCOM?
What is the purpose? What do you plan to do with this semi-auto 308?- NORAD blimp comes loose from tether
And it doesn't work, remember the guy that landed a small helicopter on lawn of the Capitol building? They should have probably seen that, assuming they were operational. Its like 3 tons. You probably don't want it falling on someone's house, so you probably don't want to randomly shoot it down. Short version is that at least in theory it is supposed to detect low flying close range missile and aircraft. And probably spy on people as well.- NORAD blimp comes loose from tether
- Are you content with 10 round magazine 9mm?