Everything posted by Vlad G
-
Need AR Magazine Holder Recommendation
It depends what you want to do with them. Personally I like the Safariland ones, because they can be stacked and they mount on my ELS mounts. I also really like the Ready Tactical ones.
-
Cabelas has been really good this week for reloading
As someone who does most of his reloading on a blue press, I do own a older Lee turret press for doing brass prep, bullet pulling, etc. I actually bought it used after I already had my Dillon, because they do work and they do a job that doesn't need to be served by a more expensive better press. So, yeah they work fine for what they are and even if you buy a better press later, it will still serve a purpose.
- Strike Industries Fat Comp
-
upper vise
Get a vise block (or like me keep on borrowing your friends block)
-
Be forwarned!!!!
Slowly over time I've reached the point where I don't answer my phone unless I recognize the number. Everyone else can leave a message. Life is a lot better that way. Just because it is in your house and making an annoying noise it doesn't mean you have to pick it up and talk to people at the other end
-
USPSA 12/21/14 @ RTSP registration open
I know that Old Bridge is running a classifier match next week at the indoor range, and CJ will run one in March.
-
Shotgun Idea
And then you have a borderline unshootable shotgun.
-
FREE FLOAT FOREND
Your problem isn't the muzzle device, it is the gas block. You didn't mention what kind of gas block or front sight you have. Usually the issue is not if the barrel nut or handguard clear the muzzle device, they almost always do because the barrel nut inner diameter is 1" or so. You have a number of options: 1) Get a handguard that fits the factory barrel nut. You can even get one that it is two pieces but then it gets harder to make it longer then the gas system unless you get one of those with a hole for the front sight tower. 2) get a handguard that fits the factory barrel nut and cut off the front sight and replace it with a two piece gas block, either one with a front sight on it, or a low profile one. 3) you could take everything off and reweld and such but to my mind at that point you might as well buy a new barrel and brake and start from scratch.
-
USPSA @ CJRPC Dec 14 2014
Hi folks, registration is open http://cjuspsa.coffeecup.com/forms/CJ_06082014_Form/ As always I"m asking for stages and help building them. Also keep an eye on cjuspsa.org Saturday night, this is the time of year when weather can throw all our plans asunder.
-
where to find more training
Why don't you pitch your product harder? I'm not convinced yet, Have you tried a 2am infomercial?
-
PIG SMS sling
It is not a 1-6 it is probably something in the 9 or 10 range, but that makes no difference because more scope power doesn't make you hold the gun steadier, you can have all the scope in the world if you are shaking your not hitting. The second group is about 2-3" the first is one is larger because he was trying to find a position that worked. I agree that if you look only at the second part of his first group the difference is not that large. I personally find that type of sling useless, but thats me, highpower trained shooters will tell you that they rock.
-
U.S. Army wants a new gun
M9s used to break locking blocks. I believe that is fixed now, but the older guns with hot ammo would crack the locking blocks rather rapidly.
-
Possession of an imitation firearm illegal?
It really doesn't sound good to me at all. Was the gun visible in such a way that a reasonable bystander would even observe it? Doesn't sound like it. No reason to have it? WTF does that even mean? According to NJ I don't a reason to own a firearm either if they so decide. If you are guessing you don't have evidence. Now BLF, I actually understand exactly what you are saying and what you did, and I'm not even sure I completely disagree with laws that allow you a certain amount of grey and flexibility to deal with this sort of situation. But I do have a real problem with the whole "need" thing.
-
Possession of an imitation firearm illegal?
2C:39-4. is vague enough, no crime needs to be committed, just that someone might believe a crime is committed. While you were probably fine under the language of the law, I do kind have a problem with the vagueness of it. Basically what it says is all you need is someone to look mildly concerned, and suddenly someone who wasn't a committing a crime before now is. I understand the intent of the law, sorta, but like so much NJ law it is stupidly broad.
-
Possession of an imitation firearm illegal?
You probably shouldn't be telling us that, because scumbags like this dude are exactly the people who will try to drag you through court.
-
Possession of an imitation firearm illegal?
Err if I'm mugging people I'm pretty sure I've already done that to myself.
-
Possession of an imitation firearm illegal?
I'm pretty sure that committing a crime with something that looked like a gun but wasn't it's an extra crime. Side note, many years back when the Rt 1 flea market still existed (before it became Rt 18, and then ceased to be), there used to be places in there selling subcaliber blank guns that looked very much like real guns. I hate to judge but based on the gang colors people were wearing while buying those you kinda guessed that someone was gonna get mugged with one of those someday soon.
-
My new factory custom Ithaca 37 Featherlight (HUGE picture warning!)
I dig the locking screws on the receiver. It is a feature more guns should use.
-
Cheap optics for a Stag Model 3
So what happens when you shoot a gun with a red dot and both eyes open? That might help with the dominant eye issue. I've shot red dots in 3gun for a couple of years and up to 250 yards it's fine if you zero for 200. 300 and out it gets rough but on the east coast that is rare outside major matches
-
Cheap optics for a Stag Model 3
For what you have mentioned (3gun or tactical courses) you basically have two major options. Either a red dot (which it sounds like you already have) or a low power variable scope. I'll talk about the scope part, as you already have the red dot option. In the IDEAL world you might want a 1-6x or 1-8x scope with true 1x, daytime illumination, and bulletproof construction. The problem is that we are now talk about $1000-$3000 and thats probably not what you want to spend. I personally run a Vortex 1-6x and I can't sing its praises enough, it is true 1x and the illumination is brighter then my aimpoint, it is just as fast as a reddot, although quite a bit heavier. The 6x lets you see and hit reasonably sized targets (say 10 inches) out to 500y or so. . Even if the battery dies you still have the crosshair, and the scope if very rugged. It is pretty much the go-to scope for 3gun at this point, but it costs about $1400. Do yourself a favor and don't even look through one, because you will then do nothing but think which organs you can sell so you can buy one. I know, because I'm still selling blood and bone marrow to pay off the mortgage on mine. I won't even tell you how much 1-8x scopes cost. But that is not the kind of money you want to spend, so we need to look lower. There are now some cheaper 1-6 scopes, but in my opinion they give up to much on optics clarity to make the 6x work while maintaining a lower price. I believe it is better to "downgrade" to 1-4x scopes, you get more optic quality for your money. Unfortunately I can't recommend any of the scopes I've seen in the price range of the things you've linked. They all suffered from bad optics, to the point that I rather use a cheap red dot with no amplification then crummy lenses. Also the illumination on them is an afterthought, possibly useful in a dark house, but outside in daylight it is pointless, though thats really true for anything under $500 that I've seen. Of the scopes I've personally seen and played with, the "cheaper" ones I would recommend, in order of price, would be the Millet DMS 1-4x, Burris Tac30, Burris MTAC, and the Vortex Viper PST. All of these are more expensive then what you initially linked, the DMS can be found for just about $200, the PST is $450 if you shop around, the others are in between. I have seen both the Primary Arms scopes (1-4 and 1-6) and I found them very lacking, at least for my eyes, I like their red dots, but not their scopes. I have no experience with the Nikon M-223 or the Bushnell AR-optic but they might be worth looking into. The PEPR mount is pretty decent for what it is, and you do need a mount, so all together I would say if you are looking at less the $300 (DMS + PEPR) you will probably end up throwing away your money when you want to replace them with something better, which eventually you will. Personally, I'd say that if $300 is too much for this project (and I'd say try to hit $500 and get the cheaper Vortex), then you would be better off with just a red dot you already have. I don't run iron sights on my 3gun rifle, at all, and after a while everyone removes theirs. Modern scopes are pretty darn reliable and the 1x means you never use the iron sights for close range.
-
Looking for opinions on Subaru Forester or Outback
So here is a question: What are you looking for in a vehicle? First draw the list of must have, then the list of nice to have, then the list of must not have, then the price limit. Then look at every vehicle that matches you requirements in the of those requirements. Eliminate everything that doesn't match, research the crap out of whats left, then drive the ones that make sense.
-
U.S. Army wants a new gun
Because really the Glock is not a perfect thing. With these sorts of things you are trying to figure out which gun's weaknesses are the ones you care about the least, or at least you would do it if you were honest about it. Plus Glock is probably a politically bad choice because of their history of douchebaggery. There would be a lot of flack.
-
What's Up with Peruta?
Source please?
-
Looking for opinions on Subaru Forester or Outback
Seeing how they tend to start leaking after about 100k or roughly 10 years, I think we may need to wait another 8 years or so to be sure of that. I'm pretty sure they said the issue was a gone a few times, but it seems to me that the boxer design is pretty prone to wearing out gaskets. Also apparently the newish engine in the XV is already getting a bad rep for burning oil even when new. On the other hand, I think Subaru's are bargain for what you get for the money. They are on my short list when its time to replace my current vehicle. I figure I can very well plan for a $1000 worth of head gasket repair and still be ahead over the life of the vehicle, and it I don't need it then bonus.
-
U.S. Army wants a new gun
Someone wake me up when they buy something, this like the 4th iteration of the "Army wants new pistol" thing in the last decade.