Skip to content
View in the app

A better way to browse. Learn more.

New Jersey Gun Forums

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

Vlad G

Members
  • Joined

  • Last visited

Everything posted by Vlad G

  1. 4 classifiers 3 normal stages
  2. The best way to avoid getting scammed is to not look for the rock bottom, lowest price, amazing deal.
  3. Quad rails look cool, but in practice they are a pretty bad idea unless you NEED them. If you need to attach a ton of gear then they make sense, realistically you really don't need that so now you just have a permanent cheese grater attached to your rifle. Handguards like the Troy one you picture, and a ton of others, that have only the top rail as part of the handguard are the way to go. Nearly all allow modular attachment of rail bits where you need them, so do the new "hot" keymod ones if you want to go that way. A smaller diameter handguard that doesn't try to separate the flesh from the bones beats a big fat quad rail every day in my book.
  4. Glock has been in big trouble before like this
  5. I do wish they used something other then a tree for backstop.
  6. That too, TBH that video is a bit odd. I don't see the point of the elbow/rib index either, holding the gun in front of your face is probably a much better idea, you know, where you can see what you are doing.
  7. I have large hands, although not like Raz-O's boat paddles of hands, and I still need to shift my grip on a 92, it is a gun too big for what it does, in my opinion. To be fair I slightly shift my grip on smaller guns too, including a CZ or M&P, or pretty much whatever because I find the extra leverage more rewarding and less likely to short-press the mag release. You don't have to shift your grip a lot, just enough to get the correct angle. Personally I stay away from extended releases, even on game guns, because they tend to be an intended mag drop waiting to happen. It isn't just about holsters, but about quick pick ups from tables and that sort of thing when smacking your gun to pick it up from a hard surface can push it down enough to release the mag. I'd say (1) get a gun that fits your hands better, (2) shift your grip and practice doing it fast and consistently getting your grip back, and (3) if all else fails learn to drop your mag with your off-hand thumb as it leaves the gun to reach for a new mag. Oh and on ambi release (or switchable side) guns, I don't like using my trigger finger, I shouldn't mess about the area of the trigger while I'm doing a reload, it should be way of the trigger and along the trigger guard or frame to avoid unintended loud noises.
  8. Thread drift warning .. but why? There is not a darn thing wrong with set screws properly installed. People drive cars all day long held together by screws, but somehow a gas block isn't trusted unless it is held in by wedges like an Amish cart. I know "in theory" screws can move, but so can cross pins. The latter I have seen, the former I have not. I have also seen multiple factory guns with cocked front sight towers that you can't straighten because thats where they drilled the pin holes. I had one of those in fact.
  9. No problem, its not like they process the classifiers for a month anyway.
  10. Yeah HE is right, as I was driving to work I was thinking I need to add those as options but I figured he would
  11. Wait wait .. HK is basically last on the polymer framed striker fired 9mm gun game (their very early attempts notwithstanding) and their capacity is 15rd vs everyone's 17rd? Interesting choice.
  12. OB does one in December in the indoor range. At CJ we normally do one per year.
  13. Ok so here it goes: The AR is a GAS operated piston less semi-auto rifle. The gas is bled from the barrel, routed through a thin metal tube and shot at the bolt carrier assembly. The part where the gas is bled from the barrel is generally refereed to as the gas block. In the BASIC AR-15 configuration the gas block is part of the front sigh, it looks like this: Note the thin tube connecting the front sight tower/gas block to the receiver. Note the front sight slips over the barrel on two built in "rings". Under the rear "ring" there is a little hole in the barrel that bleeds gases into the front sight assembly, into that little tube and makes the gun work. The barrel NUT is all the way at the back under that truncated cone thing (we call that the delta ring). Handguards, specially free floated ones, hang on to the barrel nut and sometimes they need a different barrel nut then the factory one. However the barrel nut would slip freely OVER the muzzle device in most cases, because it is a fairly large diameter. The problem is that the barrel nut can slip over the front sight and the front sight can not slip over the attached muzzle device. You don't have to a one piece front sight/has block. For one you can have a gas block that is not a front sight, like these: Those are just gas blocks, without the sight on them. The primary advantage is that they are low profile so the handguard itself could be much longer and cover the entire gas block, where normally it would have to be short to fit behind the gasblock or front sight. However those don't fix your entire problem because while you might be able to get the handguard itself over them, you can't get the barrel nut over them so if you need to change the barrel nut for a different hanguard you are still screwed. Now, back to my original solutions. You have Three choices: 1) Build it the way you want it from the start, with the knowledge you won't be able to replace parts without hard work later on. 2) Use a really thin muzzle break. The Nordic Tactical Comp (http://nordiccomp.com/retail/shop/ar-15-10/nordic-components-tactical-compensator-223-stainless-steel) is the same thickness as the barrel so any gas block or front sight/gasblock can slip right over it. It is not the best comp, but it is a remarkably good comp and this being NJ we have to make some compromises. It is also only $40. 3) Use a two piece gas block. Two piece gas blocks clamp onto the barrel, instead of slipping over the barrel. That means you can always remove them without slipping them over the muzzle break, which means now the barrel nut can slip over the muzzle break. The disadvantage is that at least in theory they could come loose. In practice, if properly tightened and locktite applied to the screws, I personally haven't see it happen not heard of anyone I know having that issue. Those types if gas blocks can be low profile or have integrated front sights as well and look like this (and they come in many flavors, these are just examples): Hopefully that doesn't make more confusing, and explains some of the terms.
  14. Vlad G replied to dajonga's topic in Shotguns
    Whats the purpose of the gun?
  15. Hi guys, this weekend at CJ we a running a classifier match. We are planning on 4-6 classifiers as well as 2-3 real stages. If you want to submit one of those 2-3 stages I would greatly appreciate it. We will also still need help setting up in the morning. Also the match fee will be $10 more then usual (so $25 to $35 depending on your membership status). The application is here and it will be posted on the webpage tonite: http://cjuspsa.coffeecup.com/forms/CJ_06082014_Form/
  16. I dunno, depending on traffic you can make it to CJRPC on 90min from North Jersey. Same long range, a lot of shotgun towers, lots of pistol pits with steel plate racks, nice grounds, etc. Oh, and it costs less.
  17. People need to stop worrying about this. It isn't that important, and unless you assemble your barrel which almost no one does you can't do anything about it. What I mean by assemble your barrel I mean barrel and barrel extension, not barrel into receiver.
  18. Well the already only sell them in packs 10. You have to go to an out of state butcher to get bags of 30, or have a special card that lets you buy them in larger packs at "specialty stores" like Sams and Costco.
  19. You guys need to be careful what you post in a open forum. NJ law restricts you to ONE condiment before your lowly hotdog becomes an assault sausage. Sure what happens in Vegas stays in Vegas, but telling everyone you are doing it is just stupid. Next thing you know you'll be posting pictures of your illegal bratwursts and then you'll be on the news with your arsenal of cured meats. A little discretion goes a long way, people.
  20. Yep as the others have alluded to it is all about the barrel nut and the gas block. The barrel nut clears most non-absurd muzzle breaks but it doesn't clear any gas block. That means that if you need a different barrel nut for a handguard then the gas block has to come off. This can happen in 2 ways, either it clears the muzzle device (something like the Nordic tactical comp which is .750, the same as the barrel) or the gas block is a two piece clamp on one. Some people really don't like the clamp on 2 piece gas blocks but I've never had or seen an issue with one. Short version: go with a 2 piece clamp on gas block (something like YHM specter gas block. or the JP two piece adjustable one if you are using a bull barrel) and you don't need to worry about the rest. You can always take it apart after the fact if you need to and install parts in whatever order. Alternatively use the Nordic tactical comp, and then everything can come out the front.
  21. Know how to operate your firearm safely and just come out to a match. If you come to OB or CJ matches, be at the range before 9am, and at some point before we get going will have a 30min introduction to the safety rules and games rules and squad you with some more experience people and you can jump right in. I do have to stress that the thing we turn people away for most is not knowing how to operate their firearm. It is odd to me, but it happens, we get people that fumble with all the controls until they find the safety sometimes.
  22. It depends. I depends on what parts you are planning to use. Some "quad rails" snap on in two parts. Some are free floated and need new barrel nuts. Most barrel nuts slip over most muzzle breaks, the problem is the gas block that doesn't unless you replace the gas block with a two piece one. What parts do you plan to use? That is what answer this question.
  23. It depends. My recommendation is to have about 5 mags you don't mind beating on. Mags are wear items, and you can never have enough. I IDPA I believe 3 is all you need, in USPSA (specially in production or Single Stack) you need the ability it carry at least 32 rd (the max required for a single stage) but you always want extra, so I carry 50rd at the start of a stage. For ARs there is High Power for the more precision, fixed position type shooting, and sometime we shoot "action" rifle matches as well as 3gun. For holster and mag pouches the safe answer is Bladetech. Things like the bladetech revolution start packs are a very good place to start and don't cost a lot of money

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.