Skip to content
View in the app

A better way to browse. Learn more.

New Jersey Gun Forums

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

Vlad G

Members
  • Joined

  • Last visited

Everything posted by Vlad G

  1. Was to see you out shooting.
  2. Heat paste. When you order you silver solder for Brownells, order the heat paste too.
  3. AAC makes a product dedicated to exactly this problem: http://www.midwayusa.com/product/746260/advanced-armament-co-aac-rocksett-high-temperature-thread-locking-compound-single-use-tube
  4. RO comes first, CRO comes second. CRO is a like a PHD in being an RO.
  5. Small scale and special. It is cheaper to forge 1000 items once you have the tools, but it is cheaper to machine 2 items from blocks then to forge 2 items. The problem is that machining 2 items is still far more expensive then the per unit cost of forging 1000 items. So when someone wants to make something slightly different (integral trigger guard, or flared mag well or whatever) and they are a small shop, it is nearly impossible to get forgings done because it is expensive to start that ball rolling. It is cheaper to get a CNC machine to make a block of metal smaller, but it does not compare with cost forging at large scales.
  6. If your point of aim is that different at defensive ranges with different grain ammo, something is wrong. It shouldn't matter much under 25yards.
  7. Personally I'd buy S&B right now, you can find it for about $230.
  8. Thats like open for revolver shooters, right ?
  9. Not to nitpick, but technically you are second
  10. Hi folks, the registration is up http://cjuspsa.coffeecup.com/forms/CJ_06082014_Form/ As always I need stage designers and build time help.
  11. And that is the biggest challenge that no one made to NJ gun laws post Heller.
  12. Nothing about your original post indicated any attempt at humor, and apparently not just for me. Perhaps next time you should mention that.
  13. HE had it right, it is called being an adult. If you can't afford something you don't buy it.
  14. My entire rant was tongue in cheek sir
  15. If we are picking on guns choices, you payed an extra $290 to find if you have the official HK approved hand. At least if Apple made a non-ergonomic gun, they would have the decency to sell you a Apple iHand that fits their iGun. Instead HK just made a gun that only fits the hand of a german monk and called it perfection. They still have the monk, they keep in in a beer barrel and they let him stick his hand out through the oversize bunghole when they want to test new models for backward compatibility. If your hand doesn't hit the USP, it is because you don't operate hard enough, brah.
  16. Plus, don't you know that .40 is like the worst cartridge ever? James Yeager said so and he has tattoos on his arms and a tactical beard, so he must be right.
  17. Everyone
  18. I know there would be a few others who don't frequent the forum. Talk to Jim or Dave
  19. Aren't you a little short for a storm trooper?
  20. We usually do 6 as well
  21. Same. Actually a lot of the large arrays end up using fairly small high speed drives for performance. At my place we are just now starting to trust 1T drives for performance. We do use 3T or so drives for backups and DR. Thing is they are no "bigger" then a desktop drive, a shredder doesn't care. It does get a bit more odd though, because when you have 30 or 60 spindles in the same RAID recovering meaningful data a single drive gets strange, but no matter you treat them the same. Tier 1 storage also no includes at rest data encryption as well.
  22. When I said something else is wrong I didn't mean just the shooter. Simple test, look at the rifle. Can you see the rear aperture noticeably off center on the rear receiver? If the answer is yes, then it isn't the rear sight that is broken. What I'm getting at here is that either the barrel and front sight are perfect and the rear aperture is then centered on the receiver but it is 2/3 adjusted which means the rear sight itself is odd OR the aperture is NOT center on the receiver which means that for it to be adjusted this much there has to be something wrong with the front sight or the shooter. Having eliminated the shooter because of previous experience, if the aperture is noticeably of center that leaves us front sight having an issue or the gun shooting sideways for whatever reason. This being a new gun build, these aren't impossibilities.
  23. For a rear sight or be adjusted to the extreme, either your head position is really wrong or so something else is wrong. Think about it, by that point it is way off center, you should be able to see that is off center vs the receiver. If it is off enter , then the problem is elsewhere, not the rear sight.
  24. I for one would like to apologize to my mailman (mailperson?) for ordering reloading components in bulks when the manufacturer sells them in the exact quantities that meet the flat rate box limits. Those are some heavy boxes.

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.