Everything posted by Smokin .50
-
OBRPC MEMBERSHIP
NOT correct! Rifles are good to go in EVERY Numbered Pit! So that's Chrono Pit - Range #7 (100 Yard Pit). NO RIFLES on the Shotgun Range--Shotguns only and ONLY Bird Shot, NO Buckshot and NO Slugs! Dave
-
Where is the CJR&P USPSA Match thread for 9/8?
Still better than I can do. I can't see the dot. When his was working, Alec made all that steel go down from a decent distance. There were both elements of smoothness as well as struggle in the video. Counting to six is second-nature for most Wheelgunners, so counting to eight takes extra brain time. I would screw the pooch so BAD, nobody would want to watch the video, lol!
-
NJ Outdoor Expo 9-14 and 9-15
I'll be "playing with EXPLOSIVES" once again this year as a member of the Garden State Black Powder Association's Historical Encampment. The Public will get to fire a BLANK Black Powder charge out of my 10 ga. muzzleloader. Other activities include Tomahawk Throwing, Traditional Longbow, Blacksmithing, and a child gets picked to ignite our 5 Pound Cannon! And all of this is just at the Encampment grounds. Fish and Game will be doing a Shotgun Demo where the Public gets to hit some Clay Birds out of the sky! Plenty of other hands-on activities for the entire family, so it's well worth the trip! Dave
-
T/C renegade .54 cal
Rob is correct. And the cO2 discharger is the simplest one to use, but since you have a shopping li$t already, I'd learn how to pull a ball since you won't have to spend any more money. The ffff Rob wrote about is when you unscrew the nipple with a nipple wrench and trickle-in some ultra-fine grained pan powder (for flintlock pans) into the flash channel BEHIND the seated ball. It only takes a few grains and then you screw the nipple back in very carefully. Cap, point in SAFE DIRECTION and fire the cap. Cap sets-off the small qty of ffff powder and the bore is clear of the "dry ball". Any of the three ways Rob mentioned will work! When we get to show you "the ropes" we'll demonstrate what to do each way. Then you'll KNOW what to do and how to do it SAFELY! And you're welcome for the list.
-
IDPA / USPSA - how do I get better ???
Howard, Vlad beat me to it, lol! And one other item: Ergonomics and how it affects "point-shooting". Grip size, grip angle, size of hands all have to mesh together. "Gun Fit" is the ability to pick-up a gun and instinctively shoot it at nearby targets without looking at the sights. Pure eye-hand coordination to get 2 Alphas at moderate to close distances and the ability to look at the next target WHILE your "hosing" the one right in front of you. Knowing where your shots are gonna hit PRIOR to pulling the trigger. Smooth IS FAST, so glean all you can from Enos and instead of watching a good shooter's HOLES appear in the targets, watch his/her body language, feet position, head direction, arm extensions, angle and height of the gun at the reload, etc. Anybody can count holes in the paper AFTER the gun is cleared...it's HOW the holes GOT THERE that counts! Good luck and don't be too hard on yourself. I have some arthritis and will never make Master. But I get lots of Alphas without looking at the sights! Especially UP CLOSE! Dave
-
Do you always carry your FID card?
Mine is dated 1988. ALWAYS with me! It's my second one; first was when I was at my Parent's house still. It's laminated, and further protected by my business card holder and the card the State Dept. gives you if you loose your Passport. I wrap a rubber band around my over-sized documents (my NJ FID is one of them) and keep them all together in my front pants pocket along with an emergency credit card. Go ahead and steal my wallet. I still have my FID, my money clip, my Passport copy docs and a credit card! Dave Old Fudd
-
NASA Launching unmanned mission to the Moon tonight from VA.
^^^^^THIS^^^^^ I LIVED through the Space Race. I WAS GLUED to the TV on July 29th 1969. I watched every broadcast for every Lunar Flight. Especially Apollo 13. I own practically every piece of footage available on the US Space Program. I've talked with both film and camera manufacturers about their Space Cameras and Space Films engineering and manufacturing. I have an acquaintance who was an Engineer for Grumman and who worked on the LEM. I've seen the "evidence" of the Nay-Sayers that the landing was a hoax (the famous "shadow" pix of the LEM on the surface). As a Pro Photog, I'm convinced that the reflection of the Lunar surface filled-in the shadow, thus debunking the Hoax Theory. Overcoming 1/6 G wasn't hard for a rocket motor to do when the LEM left the Lunar Surface. The Astronauts replaced the weight of their Hasselblad cameras and lenses with Moon Rocks, bringing back ONLY the 70mm film magazines. These cameras are still on the Moon. The walls of the LEM in some places were ONLY a few millimeters thick of layered reinforced foil. More weight savings. As for not establishing a permanent Colony, well the Saturn-5 Rocket, at 363 feet tall, could only carry so much of a payload all the way to the Moon. Funding for a much larger multi-stage Rocket design was needed to encompass such a huge endeavor, and it never would get past Congress. Payload weight and size were always the big concerns. Two MILLION parts all had to work correctly, at the right time, every time, in order to go to the Moon and BACK! As the Apollo Program was winding-down, the DOD became keenly interested in the Shuttle Program. In fact the DOD itself had the final say on the length of the Shuttle Bay (this has been declassified) at 60' 0" as they had in-place a program to launch and capture satellites for use in the Star Wars Program. I wish we would go back to the Moon. But we as a Country are going to have to make it a PRIORITY to do so. And that will take both commitment and backbone! It boggles my mind to think that we lost ONLY three Astronauts (in the "Plugs-Out Test" for Apollo 1) during the entire Apollo Program, but TWO entire CREWS of SEVEN during a Launch (Challenger) and a Re-Entry (Columbia). May their souls forever rest in peace.... Dave Amateur Space "Junkie"
-
Any Walther P38 fans?
Nice P.38! My Dad used one in WW2 in Italy to draw-out the Germans from their protective cover while my Dad's buddies were waiting (partially hidden) with Garands at the ready. He didn't bring it home. I have fired a friend's though. Quite accurate when you bury the front sight into the notch in the rear! Dave
-
Your favorite gun's nickname and why....
My Garand is named, "Weaser", because every once in a while it's time to "Grease the Weaser"! By lubricating the Op Rod of the Garand, lol! From Spanky and the Gang, lol! My .45 Colt Officer's ACP is called "Loosey-Goosey", because it's just loose enough in the throat to chamber and fire any ammo you feed it, yet still be accurate! My 12 ga. is called "S and H Greenstamps", since that's all my wife used to "buy it" over 30 years ago! And with the OP's permission, my Uberti Colt Walker Black Powder revolver was named "The Hog Killer" last April 17th! Still chewin' on that Hog too! Dave
-
Red Wing Sporting Clays
It will be much more enjoyable there after the first frost--when the skeeters all DIE OFF! Or at least wait until it's cool enough to wear a jacket while shooting! Or you'll NEED the bug spray!
-
T/C renegade .54 cal
YES IT DOES! LOL! There's just two kinds of Muzzleloaders in this World: Those that HAVE already Dry-Balled (ball first, no powder in bore), and those that WILL some day, lol!
-
Old bridge
The Second Sunday Sign-Up and Safety Check is TODAY and starts at 9:00 am SHARP, so he's at the Indoor Range RIGHT NOW! Give him a call at 732-360-1987...... He might ask you to pop in today or wait until next month's general membership meeting on the 1st Thursday of October. Some guys that work second shift can't make the meetings... Dave
-
T/C renegade .54 cal
O-K, sounds good. In case we don't see each other on Thursday, here's a small list of the essentials: .530 Round Balls .018 Pillow-Ticking Lubed Ox-Yoke Patches (or other thickness as recommended by the Dixon's), size .50-.59 caliber part #5187 Goex 2Fg real Black Powder (or finer granulation 3Fg if that's what Rob uses!) Brass Powder Measure with built-in funnel spout, for 5-120 grains of powder. Goex Can Pouring Spout from RMC. (I'll give you a metal Goex Can to use with it!). Screws into Goex Can and lets you pour powder SAFELY into the Measure or your Flask. Short Starter .54 caliber 10/32 Range Rod (T-Handle preferred for ball-pulling). Get one long enough for the Plains Rifle, so you only have to ever buy ONCE! Nipple Pick, Patch Worm, Ball Puller, Jag, Breech Scraper and Wire Brush Combo Pack from RMC Corp. in 10/32 thread to match your Range Rod! Nipple Wrench for #11 RIFLE Nipples! Heavy-Duty, so makes it easier to do and lasts a long time. Look for MSM brand. CCI #11 Magnum Percussion Caps (other brands O-K, these just work EVERY-TIME for me!). Gun Oil--the regular type in a bottle--that you can get just a single drop or so at a time to come out. For use with Nipple threads and breech end. Other HANDY things to have. NOT absolutely essential, but makes your life easier: Butch's Black Powder Bore Shine in a bottle. Makes cleaning a whole lot easier! Emulsifies Black Powder residue on contact; neutralizes salts that are corrosive. Cleaning Patches--the big, dry round ones he sells there! Any old tooth brush (for parts cleaning). Brass TDC brand Universal Capper (sometimes called the "Teardrop"). Holds 100 #11 caps. Buy ONCE, cry ONCE! Do NOT buy the straight-line cappers--they DO NOT WORK! A piece of cowhide for capper's neck strap. Pedersoli brand Powder Flask. Pour powder from Powder Can to Flask, then Flask to Measure, then Measure to Muzzle! (NEVER directly from Flask to Muzzle!). Plastic Powder Funnel. Comes in handy when pouring powder from can to Flask or cleaning spilled powder grains. Gun Oil-ADVANCED! I use Birchwood-Casy's Barricade in the spray can. For application inside and out for the entire barrel. Store Rifle UPSIDE DOWN on paper towels after cleaning! This cheap rifle will cost you some coin to get the right stuff from the get-go, but will very much be worth it! You'll avoid all of the frustration most Noobs go through figuring-out all of this stuff on their own! You'll enjoy yourself more and use each tool I've outlined so as to maximize the amount of shots you can take, and most importantly, do it all in a SAFE and FUN manner! I hope that we get to see each other on Thursday. I already have a Goex Can put on the side for you! Dave
-
T/C renegade .54 cal
Sounds good! I'm hoping for the best! Dave
-
T/C renegade .54 cal
Still waiting to hear from him about the 12th. In the meantime I picked up some 10 ga. wonder wads already. I'll soak them in bore butter to use at Colliers Mills. Every 3rd BLANK gets a soaked wonder-wad...keeps fouling nice and soft so .125 OP cards slide down the bore. Tight OP cards ensure decent compression for the BLANKS, make nice boom and leaves less residue!
-
Can you "limp wrist" a shotgun?
As the proud owner of a pump for decades, I'll add this: If it's a new scattergun, chances are that it's not properly lubricated along the rails and everywhere else that there's metal-to-metal contact points. Not saying that's the case here, but lots of Noobs just take a gun out of the box and start shooting it. I can tell from several yards away just by the sound of the "stroke" whether or not the scattergun is too dry. Lube it up with some oil AFTER getting the packing grease off the rails and wimpy friends will be able to stroke your gun easier. Once the rails "wear-in", you'll notice it's easier to stroke it. An authoritative stroke should send that hull flying out of the way. Eventually you might get fast enough and coordinated enough to be able to engage 5 steel poppers in 2.5 sec's..... Dave Shootist
-
Do I have this right? Inheritance situation.
Howard, The NJ laws are so convoluted that you could theoretically prop-up the body of a dead hand gun owner in the cab of your pick-up in order to be "legal" to transport the hand gun to & fro. And a wife or offspring has to wait until you DIE to be able to "borrow" your hand gun and take it to the range (without you being there) along with their own privately-held firearms cache. Doesn't matter whether she or they already have NJ FPID's, plenty of their own toys to "play with", are Competitive Shooters or any other common-sense approach to this goof-ball law! So if you're in the Nursing Home on your death-bed, your kid(s) are felons if they borrow something in the safe, but if your're DEAD and you've willed it to them, then everything is oakey-dokey! Dave
-
Red Wing Sporting Clays
Been there. Nice place. Close to Smithville, so it's easy for the wife to tag-along even if she doesn't shoot! Have her strand you there and she takes the vehicle for "recreational shopping". Call when you're done. She gets to do "her thing" and you get to lift something other than shopping bags, lol! Hit the Smithville Inn for dinner. Make a nice full day out of it!
-
T/C renegade .54 cal
O-K, sounds great!
-
News from your Neighbors - PA Bloomsburg Fair
My son moved to Wyomissing last June. Lovely town, just a few minutes from everywhere and only 35 minutes from PA Dutch Country! 'Murica!
-
Local carbine training?
The phone number is there. So why not go old school and just call them and ask for references. Sometimes you Kids amaze me! Also check-out AR-15.com OR the PA Firearms Club's forum/blog. Somebody will know something, lol!
-
T/C renegade .54 cal
I can flex and arrange it so we go after you get outta work; just have to make Dixon's before they close at 5:00 pm for dinner. Then get to Dietrich's before they close at 6:30 pm. And I need to get something for dinner while out in that area, since I'm diabetic. What town do you work in til 3:00 pm? It might still be do-able, so long as you don't get hung-up in traffic returning to PA... So let me know.
-
Ariel Castro hangs himself in his cell
I'm just "all broke-up about it"! Tonight I toast his departure with some 18 yr. old Jameson. Hope the Coroner does a thorough job and reports severe sphincter damage in his final report! May he ROT IN HELL!!
-
Arrested with a loaded AK-47
I wonder who "dropped the dime" on him? Stuff like this is gonna happen from time-to-time. It's the price of freedom for the rest of us. It would be nice if it didn't happen though. STUPID KID just ruined his life. Glad no one got hurt.
-
T/C renegade .54 cal
I can pretty much be flexible. I've made the trip countless times. Best time to start-out from my house is around 9:30 am (Sayreville area). Dixon's is about 1.5 hours for me, and I drive right by the WMA we both shot at, so could meet you along Rt. 78 corridor and I can drive you there. I also need to pick-up some meats and cheese from Dietrich's Meats: www.dietrichsmeats.com . Cabela's is only 11 miles down the road from Dietrich's. Dixon's is just 3 miles down RT. 737 from Dietrich's. Cigars International has a newer store built on Cabela's front yard. Pinnacle Ridge Winery only 1/2 mile from Dietrich's. So plenty to do if you want to? The "trick" to avoid any bad traffic is to "get outta Dodge" before 3:00 pm, so I don't sit in bumper-to-bumper rush-hour traffic on Rt. 287 So. in Piscataway on the way home. As for the number of places to stop at, that's up to you, as long as I get to Dixon's and Dietrich's I'm all good. So get back to me and let me know what your schedule looks like for Thursday the 12th. Dave