Everything posted by Smokin .50
-
Round ball in a modern muzzle loader
Just for giggles, who makes a '42 twist? I think you meant to say '48 twist, but no matter........ I've cut playing cards in half with the "tweener" at several club's events over several years, with both patched round balls as well as 370 grain .50 caliber T/C Maxi's. Earned my Distinguished Expert in Muzzleloading Rifle with the same $300 (now $400) gun. Not to be a PITA, but I wouldn't be too quick to tell someone to use sabots in a traditional sidelock...... Next Sunday we'll have 15-20 Shooters at Old Bridge's Black Powder League Match. Why don't you come as my guest and bring your '90 twist rifle. I'd love to see it! Dave
-
Opinion- Would you like to see a Gun Store and Range in Old Bridge?
^^^^^THIS^^^^^ And if you still wanted to try, you'd have to spend at least a few hundred thousand just on a public relations campaign. Then millions on just the Land Buffer, then all of the regular costs associated with building a Commercial Property: Permits, Legal, Zoning, Construction, Stock, Labor, Advertising, Insurance, Bond to the Town, Cleaning Service, Phone, Internet, Taxes, Uniforms, Software, Hardware, etc., etc., AND THEN EVERYBODY HERE WOULD COMPLAIN ABOUT PRICES, WANT SPECIAL DEALS FOR FORUM MEMBERS and then go buy stuff over the internet!!!!!!! JMHO Dave
-
Target Range Poses Danger?
Having a "buffer zone" is very important for a range. Good range management dictates it, and when adjacent property alongside a range becomes available, instead of beotching about how much dues are, the members & trustees Cowboy-Up and attempt to buy the parcel(s). Doing so helps to eliminate this^^^^ situation! I KNOW this first hand......
- OBRPC ?
- OBRPC ?
-
Gangbaners going to lakewood range?
I'm glad I don't have to put up with this situation at the Clubs I shoot at. If you really want to stop the "Bangers" and others who won't qualify for a FID, just stop renting guns.....or install facial recognition software into the security cameras and POST IT for all to see. Or BOTH! Felon comes into the place and "Pop goes the Weasel"......yeah I know slippery slope Constitutional issues, but it not like you don't KNOW you're on camera from the moment you walk through the door.... Somehow I was able to make friends (before computers) and go shoot what ever others had and then decide if I was in the market for that gun or acc'y. Never went to a rental range to "try-out". O-K, if you Kids want to flame me, go ahead...I'm a tough old SOB and I can take it!
-
Round ball in a modern muzzle loader
One more thing, post Easter Meal: Patched round balls don't behave with a fast twist at "normal" velocities, so the only way to tame them is to use more powder than necessary. Some rifles can self-straighten the PRB's in a fast spin scenario under the ideal conditions given (no wind and a heavy charge for maximum speed). I watched a fellow shoot his inline with PRB's every month. He was able to find a "sweet spot" up near max powder levels that worked almost as good as a "tweener" barrel like I have. And just an FYI, even swagged Hornady factory balls don't like a fast twist barrel, and they don't have any sprues at all! Dave
-
Round ball in a modern muzzle loader
^^^^^THIS^^^^^ Bob, you're almost spot-on! Everything you say is true, except that the twist rate is 1:48 from most half-stock Hawken style rifles, and even slower 1:60 , 1:66 out of the old patched round ball-only rifles. The '48 twist is considered a "tweener" and will usually do very good at both projectiles. The inline sabots like the '28 & '24 twist and so do long conicals. See you later--Happy Easter! Dave
-
Baikal /Remigton SPR310 choke thread problem
I have the same gun. Russian thread, not SAE. I replaced my choke tubes with aftermarket ones and never looked back. If you want me to, after the house wakes-up, I'll look to see who makes them. Happy Easter! Dave
-
357 revolver suggestions
^^^^^THIS^^^^^ What Henry said! Get one or the other, since the 7-shot version doesn't know what it wants to be (Gun Game wise). Yes, they're a little more coin, but well worth it. There's a reason that HKS Speed-Loaders have "586" etched into the tops and not "GP-100"......just sayin'....... Dave
-
First muzzleloader
What are you gonna use it for? If you want to merely extend deer season, then an inline is the way to go, but remember that if you use sabots you have to scrub that plastic out of the bore after about 4 shots. And the Encore is a great gun for this! If you want to really learn muzzleloading, buy a slightly used traditional percussion sidelock like a Hawken-style rifle. For just $30.00 a year you can become a member of a club that shoots real black powder in Vernon, NJ, just a short drive from Randolph. We shoot paper, novelty targets, and have Woods Walks that feature gongs and other specialty targets. The REAL fun of muzzleloading.......at a fraction of the cost of using imitation powder and sabots. Dave NRA Distinguished Expert in Muzzleloading Rifle and Pistol
-
So what do you shave with?
Thanks Sandy, for noticing my attempt at creativity, lol! Happy Easter to the entire Family! Dave
-
So what do you shave with?
Norelco Triple Header, usually @ 60-70 MPH and I get a "breastastically" close shave w/ NO "motorboat" complaints from the misus!
-
The NJ GOP wants my money. This is what I told them.
SCREW HIM! I figure I'm out at least $200 for expenses for all of those trips to Trenton on my dime! Wouldn't have even needed to go if not for his SILENCE, but because his remarks are so deafening, I spent my money. So "they" better smarten-up, because there are lots of folks like me who won't throw their dollars away on a RINO! That $200 could have went for a couple nice meals with the Wife, or bought me some more ammo, etc. HE DOES NOT GET A PENNY UNTIL AND UNLESS HE COMES OUT OF THE CLOSET ON THESE BILLS! Dave Former Republican, now a PISSED PATRIOT!
-
Bachelor Party ideas
Which "Gun" do you use and when, lol??
-
Bachelor Party ideas
Here's another vote for Lehigh Valley Sporting Clays! I've been there--quite a nice place! Everything Glenn said is true! Since the Groom is a Shotgunner, he won't feel "stupid" at an event held in his honor not knowing how to bust clays! And there's a Casino with nice restaurants in Bethlehem. It's a straight shot out of the Holland Tunnel to 78 West. In the same "neighborhood" is Cigars International, just off of Rt. 78, so you could shoot, have a nice meal, get some cigars, etc. Only limited by your budget, but for around $150 or so per head, you could do everything I just mentioned......... Have FUN whatever you decide to do! Dave
-
So... are you a "handgun guy" or a "long gun guy", and why?
After 44 years behind the triggers, I'm a Shootist. Garands to Barretts to Black Powder and back. If it goes BANG I either own it, shoot it or have a friend that does both. From USPSA to Over-the-Log Black Powder precision Shoots. My Club has so many opportunities it's hard to pick just one to be involved with since everyone is so nice & welcoming at EVERY event!
-
Elevator murder experiment
Excellent point. So maybe jump into elevator, pull emergency knob and start screaming& kicking, and then if that doesn't work, it's slice & dice time? Hard to call........ But more troops have been killed by friendly fire than these two clowns will ever worry about the way they pulled this stunt!
-
Elevator murder experiment
^^^^^THIS^^^^^ Or it's a good thing I wasn't there! The attacker would have several stab wounds in his back from my due diligence! Gibbs Rule #11: ALWAYS CARRY A KNIFE!! It's only Fun & Games til someone like me shows up! Dave
- 12 Ga or 20 Ga 1st Shotty?
-
Odd email from Christie
Form letter outta BOTH sides of his mouth?? OMG!! It's a real shame that we're nothing but political pawns in this game Trenton is playing. If he wasn't such a SCHMUCKY RINO, he could have put an end to this needless runnin' to Trenton for every damn meeting/vote! I wish I could just transplant the Range (OB) and all my friends from all of the various disciplines I shoot to Iowa (where my son is), the land of the FREE where a hand gun permit takes a whole DAY if yer in a hurry, otherwise 3 days to have them mail it to you!!!!!!!
-
1911 guide rods, what works?
Then go with the GI set-up like was suggested, and use a shockbuff. Just watch for any wear on the recoil spring that would indicate "bunching or kinking" that could cause a failure to cycle. Worse case, you just change the spring more often...
-
1911 guide rods, what works?
Ray, Either a different brand 2-pc. like Wilson, or perhaps a one-piece full length rod. I have a couple .45's with 2-pc rods that don't come apart unless you want them to. Also depends what type of barrel bushing you're using (easy to remove?).
-
3/17/13 - OBRPC - REAL DEAL STEEL
Anybody can shoot fast James, but lookin' GOOD, WE got THAT covered, right? LOL! Nick is the next Otto Preminger (In Harm's Way) lol!
-
+1 for Darryl's Gun Shop
Moved store to PA years ago--place was for sale months ago. Not sure if he's "still around". Quite a Character in his day!