revenger

https://www.ammoland.com/2018/11/first-circuit-rules-there-is-no-right-to-bear-arms-outside-the-home/#axzz5W1ilyw00 From ammoland, so what is happening is the frustration that the left has and the lower courts are going to go against every carry case in the US. this is the lefts payback for Kavanaugh, A vacancy couldn't open up soon enough.

So what exactly does this mean

So, what about the case by case? can this be broken down into a simpler form, yea we lost but where are we. I cant make heads or tails of this.

retail stores need to do more as well, many ranges have no political information available for patrons to see. at my local indoor range I see many 1st time shooters who haven't a clue as to the politics of guns in NJ. How about we start seeing some factual info being posted in all NJ's gun stores. replace some pics with current NJ politicians on pic below

recently had a Brownells order sit at the post office in Dover (morris co ) for over a week. tracking had them sign it in and it just sat there for a week, no one could explain where it was or when it would be delivered. got into a shouting match with the ass holes. not surprised at all.

I just read instruction form that was included and it states in bold it must be done at law enforcement agency, does GFH qualify somehow? I would think there aren't too many cops who know how to roll prints anymore,

any updates on where to get card done, just got my florida renewal and they want their print form filled out. Ok, fingerprint card is for out of state + $42.00 can this get done at one of the gun for hire CCw classes?

"These laws were basically written to help dealers." exactly.

It is amazing how many gun owners are still not aware of this law. a fudd at work was recently talking about a rifle purchase and I told him about the law, He had no idea. I think dealers should assist in informing gun owners about important changes though they might have financial motives for not doing so. Eventually some law will be passed due to an uninformed clientele and will hurt them financially and by that time permanently.

f find out which retired troopers took up residence in Boca Raton and you shall find the answer.

Whos' bob viden?

Yes on the Herrett's grips, the Jordan Trooper, .standard grade wood. I bought another set for my 625 JM once I received these. send in a trace of your hand and they make them for your grip. I have a set of the plastic Troopers that Pachmayer sold years ago for my 15-3 and they were way too big but a nice shape. these fill my hand perfect. I will be ordering more for K22 and want to talk to them about grips for M41. I have grown partial to smooth grips that fit just right. have not got around to sending 625pc back yet, great gun, accurate, smooth just shoots to the right with all ammo. The barrel does not have an obvious cant although when I put my forcing cone plug gauge in it goes in way past the "fail" line, my concern is that If the frame requires replacement I will have to go through all the permit bullcrap just to get MY gun back . S&W should just put same S/N on new frame, doesnt seem like a heavy lift to me to do that, probably only a 5 minute set up. probably even less since it is laser etched.

"the child’s parents will be notified. " sure, as well as the local police, county sheriff or state police to investigate if a parent has a FPID or registered firearms. county prosecutor as well to recommend to a judge that your guns be put in "safe keeping" until a professional diagnosis can be made all at the cost of a 2-3 thousand psychiatric evaluation of the family and the thousands in legal fees and you and your children being added to a government list FOREVER . later on in life when your child or you applies for a job or a gun license he/she will be forced to answer "yes" to some question not yet crafted in order to catch you in a lie and deny your child or you a freedom which is enjoyed by citizens who enjoy the protections of the constitution. No thanks Dr Conaway ( Dr. Herb Conaway (D-Burlington), a primary sponsor of the Assembly bill.) Being a responsible parent I am best suited to make these decisions NOT THE GOVERNMENT!!!!

Thanks on the link, the link I put in was for NJ legislature passing laws in "anticipation" which will soon be widespread if they don't get a SC beat down. for some reason I couldnt link that school story. thanks for adding it.

Anyone who owns a 617 or any revolver with tight chambers should do this or have it done. Been shooting my 617 10 shot for about year and found it very frustrating as after 1 or 2 cylinders you could not tap the ejector rod and have the empties fall out, gun spent alot of time in the safe due to this. after doing some research this is a problem a lot of 617 owners encounter . The recommended fix is to ream the chambers to the correct SAMMI specs. with a lot of mixed opinions on S&W repair service on the S&W forums i choose to do this myself. I ordered the correct reamer from Brownells , The Clymer .22lr REVOLVER cylinder finisher and proceeded with the job.( follow the usual metal working techniques, lots of cutting oil and NEVER go backwards ) the end result is a gun that is now fun to shoot with absolutely no negative effect on accuracy , I have purposely not cleaned my gun just to see how many boxes of various ammo I can put through it, well past 400 and still dumps out the empties with a slight push. With the chamber reaming, forcing cone cut to 11degrees, sights, springs, hammer, polishing internals and grips it is fun gun to shoot and groups very well at 10 yards double action. as any .22lr revolver shooter knows it is hard to get a light double action trigger and still have reliable ignition, I find about 8lbs is the lowest I wish S&W would market a frame only for their various K, L, N frames, something along the theory of a upper/lower where you build your own gun. A frame with a fitted cylinder and you finish it yourself with aftermarket parts. I'm not that happy with S&W's current quality as compared to the older handfitted guns . while on the phone with S&W a few months ago I was asking about this gun as well as a 625 PC that shoots off the paper to the right at 10yds, When I was explaining a condition to the person he said " never never never never never never" remove the side plate? Huh, If I wanted a gun with a 120 grit action I would have ordered it that way, anyway it was a good time to clean the rust and crud off the inside of the frame. yes stainless does rust.

It is time for us to start attacking on every front and every issue, not just mag limits how about bayonet lugs, flash hiders, suppressors, how many non-prohibited lawful constitutional following gun owners in NJ utilized a fixed bayonet to commit a crime, I'll bet a years salary that the number of NJ politicians that committed felonies is higher. How about transporting, hollow points, FFL out of your garage, stand your ground.....the list is endless

This story just appeared on NJ.com. NJ.com changed their site recently making it harder to post links. Gun owning parents and parents in general should understand this has NOTHING to do with finding out if a child has CLINICALLY DIAGNOSED DEPRESSION. This has to do with taking away lawfully owned guns from parents whose child may not answer these question to their satisfaction. once again see this link . https://www.nj.com/politics/index.ssf/2018/10/lawsuit_filed_against_phil_murphy_seeks_to_help_nj.html Opfor will be passing as many laws as possible "in anticipation" of ANYTHING they do not like. Talk to your kids and, explain this to them and what their ultimate goal is.

I think one change might be that lower courts will weigh the chances of a pro-constitution case making it to the SC in left leaning districts. The Hawaii case being one of them, When the 9th circuit re-hears it enbanc they might try to implement a strategy that will benefit neither side and try to shut it down there, What they can do I don't know but be assured they will find it. The 3rd circuit and lower courts here for us will be doing the same . Think about the magazine injunction, will it benefit the Opfor to rule in our favor for "1" case or take a chance having it go all the way thus making the ruling the law of the land. As I said in my post about the Janus v. AFSCME case I'm sure we will now see the communists in trenton passing as many anti-american , anti-constitution laws in "anticipation" of any SCOTUS ruling that is favorable to America. https://www.nj.com/politics/index.ssf/2018/10/lawsuit_filed_against_phil_murphy_seeks_to_help_nj.html If someone wants to take the time to read a copy of "Rules For Radicals" by saul alinsky ( Opfor's battle plans) I'm sure we would be able to dissect their strategy and get an idea.

FSS has some nice .22 rifles in the back room, they had a nice collection of the Remington nylon series of rifles.

A recent story on nj.com (sorry no link) about a case in NJ that has to do with the Unions, I think they call it Janus v, ????. Well anyway what the communists in the legislature did was to pass a law in anticipation of the SCOTUS ruling against the Unions. A local government worker tried to withdraw from the Union and found out they wont let him based on the law that NJ recently passed. This law is in direct violation of a Supreme Court decision , I think this should be watched by us and the NJ 2A community as this is exactly what they will try if the new SCOTUS is to ever rule in our favor on the 2A. This fight will be much like ours will be. found the link: https://www.nj.com/politics/index.ssf/2018/10/lawsuit_filed_against_phil_murphy_seeks_to_help_nj.html

https://www.ammoland.com/2018/10/njs-firearm-permit-revocation-law-provides-no-basis-for-the-forfeiture-of-firearms/#axzz5Su2Wn7Ju something minor in our favor, cant take your guns unless you are a prohibited person. I wonder how this is going to conflict with them taking your guns if your anti-gun neighbor accuses you of something and they want to take them.

Now you did it, The politicians will now require us to get permits for chain saws as we will be able to cut a length of wood and shape it into the form of a rifle stock in which we will be able to mount the action of a rifle. Who will be left when they come for my woodworking tools.

Not sure if this is being discussed in a secret forum but did anyone hear the story of a security guard for a movie theater in Roselle that was denied a CCW because of "justifiable need" and the one from a carjacking a year ago where the victim used his gun to defend his family, this one seems to have been kept quiet due to the fact it was "justified" and the powers dont want that kind of story getting out.

So I got rid of Verizon and got the cheapest Optimum internet and now use a firestick to watch netflix and amazon prime, I am trying out Hulu for live TV but only get a few channels but most of the ones I watch so its not that bad. anyone have suggestions for Live TV on a firestick like sling Tv or any of those. I also got an Ooma phone in case the kids need it for 911 when we are not home, I'l cancel that once they get a little older.

.38 is a great starter for beginners, 30-06 more steps involved like annealing the cases and trimming if needed. i load 5.56 and 30-06 for bottle neck cartridges I started back in the early 80's with .38 spl using old tong tools and a scoop for powder, it did the job. I tried a progressive press back in the late 80's and never liked it, spent more time clearing cases , maybe they have gotten better since than. I use the Redding T-7 turret and a few O frames and Frankford priming tool . hand held priming tool is good as I can Prime all my cases at work.