Everything posted by zoid
-
How many rounds can you load per hour?
I'm doing maybe around 300-350. I don't go very fast. I do a visual powder level check on every round before I seat the bullet as to avoid squibs and double charges. This is with handgun loads on a Let Pro 1000 Progressive Press. I've actually timed myself at a quicker pace and I have done 8-10 in a minute which equates to much more per hour. I feel like I should be over 500 an hour, but it never works out that way. Not sure if I'm below average, too slow, or whatever. I know it's not a race. Just trying to get a sense of an average pace if there is one.
-
Serious question about CCW training...
I said yes. I can see the arguments for no. I just think you should show some basic level of competency if you will carry a loaded weapon on.
-
Are there any gun laws you actually agree with?
It is good to have a proper safe, I agree. But what about the times when perhaps you had your gun out cleaning or dry firing or something else and you leave it on the kitchen table or in a drawer while you did something else and walked away. I have to admit I have left mine out when no one else was home. I do put it in the safe though when I leave the premises. I also agree for CCW there should be some required demonstration of weapon proficiency. I'm sure all of us could think of some people who we would not want carrying a gun despite them not being criminals...
-
Ammo sales to NJ
That's weird, I bought from them before, never an issue. But it was more than 6 months ago. Maybe a policy change.
-
Are there any gun laws you actually agree with?
Of course as gun owners we're often against most gun "control" laws. But are there any you actually agree with? Are there any laws, rules, regulations you would actually agree with being passed (whether real or something you feel strongly about).
-
Shot an M&P 9...
You probably already know what it is just not familiar with the term. I wasn't either till recently. After you shoot slowly bring the trigger back to it's starting position. You'll feel it engage/reset and be ready to fire again. You can do it when dry firing too. Pull trigger, keep it pulled, rack the slide, then slowly release the trigger till it resets and is ready to be pulled again. That's the reset.
-
What's Your Feelings on This?
That makes sense, the names were just icing on the cake (pun intended)... ah so tasteless, sorry.
-
What's Your Feelings on This?
Hmm, shouldn't there be more to the story than just the names? I can see this happening if there were some type of neglect/abuse. I'm not a lawyer so I ask don't names fall under the 1st amendment? While I don't agree with the names should the govt. be allowed to take away kids because they don't either?
-
What's the benefit of cleaning primer pockets?
I've seen some people de-prime (write term?) their brass prior to cleaning/tumbling so the primer pocket is clean. What is the benefit of doing this? I'm a bit of a whiner as it is when it comes to reloading so any extra work I will complain. Just wondering why it may be worth the extra work.
-
Shot an M&P 9...
Well I'll let you guys in on a little secret. I've been trying to convince myself I'm not a Glock guy since I started shooting. I never liked the way they looked. They don't do anything for me. But I shoot them very well. Deep down I'm knee deep in the GlocKoolaid, but I'm trying to swim out. I have heard the Apex kit makes a world of difference. One of these days I'll have to meet up with some of you and try it out.
-
Shot an M&P 9...
I been meaning to try out the M&P series for a while now just to see what the hype was all about. Lot's of people like them over Glocks so had to squander my curiosity. Firstly it felt a little too long in my hand (it had the medium palm swell). I'm wondering if the smallest one would make a big difference. Secondly the trigger. I was wondering if it's best to base the trigger off a rental. Theoretically it should be plenty broken in, but it's still a rental and they are rough around the edges. To me it did not feel smooth, felt like there was "grit" in the take up, and the trigger break felt longer than a Glock if that makes sense. Also the reset I'm really not used to. It's a longer travel and you don't feel it as much so I could see myself short stroking the trigger. Thirdly, I shot to the right and I think it's cause for some reason the grip makes my finger wrap around the trigger too much. My question is how much of a difference would a different palm swell make for me? Also, is my assessment of the trigger on here or do some of you guys feel the same? Or perhaps it's cause it was a rental? Thanks for any input.
-
25 "Must Have" Guns in a "Proper" Collection
All in favor of this list being passed into law say "Aye".
-
First visit to the range - I'm hooked!
All depends. For 9mm I could see the argument that it's not worth the time since you can get 1000 rounds for around $180 or so. Even still I save about $80-100 bucks per 1000 rounds reloading. However, I like to shoot 45ACP, and now I'm saving $250-350 per 1000 rounds. Basically every couple of 1000 rounds I shoot of 45 ACP I save enough to buy a new gun. Of course it doesn't actually work out that way (I wish, shoot 2000 rounds get a free gun, LOL!), but you get my point. Reloading allows someone who is into guns to shoot guns they may not otherwise be able to afford to shoot. However, you have a point. If you're miserable doing it then yeah, not worth the effort. Most reloaders find a lot of personal satisfaction cranking out their own rounds. $100 says TwoSpots gets a press in 6 months.
-
First Purchased Handgun
In some owners manuals it says to field strip, clean, lubricate first before shooting. It only takes a few minutes so not a bad idea. Sigs are very easy to field strip.
-
First visit to the range - I'm hooked!
I doubt most new shooters will get into reloading right away. In my opinion it's only worth it if you're shooting at least 500-1000 rounds a month (depending on caliber), otherwise you should just buy bulk.
-
1911 disassemble
Took me around 45 minutes the first time when I first got my 1911. 20 minutes of which were spend looking for the bushing that flew into the next state. After the first time it's super smooth sailing.
-
Bad gun purchases
Not so far, but I haven't been shooting/buying all that long. Everything I've had so far has been awesome. I only sold my HK cause I needed the money to get other things. Nothing wrong with it, I just liked shooting my other guns a little better and it slowly saw less range time. I'm not much of a collector.
-
First visit to the range - I'm hooked!
Shooting is pretty much the legal version of crack my friend. Tell the kids to start saving for college now that you guys got a new hobby. LOL! I was in the same exact boat as you also about a year ago. Same range and everything. It's very fun for sure and it can be expensive. I found that the more you're into the hobby the more you find ways to get good deals on guns and ammo. Have fun!
-
SIG P210 LEGEND
I use Picasa too. You can upload all your pictures to your Picasa account. If you don't have one it's easy to set up, same as with the gmail/e-mail account. Once you upload it when you click on the picture on the side there is an option for linking your pictures. Just copy the link they give you and paste it your reply. That way we can at least click on that link to see the pics. You can also click on the picture icon in your response box and paste that link in the address bar, that should make the picture show up in your response/post.
-
Big difference in accuracy between conversions and dedicated 22 pistols?
I never understood why two seemingly identical rounds would yield such different results. I didn't know they had a kit for the 92, pretty sweet.
-
SIG P210 LEGEND
I'd type in all caps too, least for a while, if I got myself a Sig 210 Legend. If I ever am fortunate enough to get one I will type in all caps for one week on this forum in celebration.
-
EEA Witness Combo 45/22 or 9/22
I think cause if you had an all steel slide the it would be too heavy for the 22lr cartridge to cycle properly. Most of the 22 slides are made of aluminum which is why they don't lock back. The steel slide lock would wear them down. The ones that do lock back have a steel insert for the slide lock to catch.
- The family grows by one
-
1911 problem/question
That's a more complicated job unless you're a gunsmith/1911 armorer. Recoil spring is the main one that needs replacement and is very easy to do since you just have to field strip it.
-
OBRPC, Static Steel, Sunday 11/20
I should be there. Gonna try my 1911 again.