Heavyopp

Leaking? Will be interesting to actually see what it is -- probably had coffee spilled on it

I would think a 1/4 or 1/3 horse would be fine -- Your geared way down with the pulleys -- plenty of torque I have some parts if your in need -- Pulleys for both motor and drive rod, Pillow block Bearings for 1/2" shafts, I also have 6" and 8" drum fittings and pipe -- This is stuff that I bought in bulk to get better pricing when I was making and selling tumblers -- Pay what I paid -- I still have the receipts I'm in Middlesex Borough -- 08846

Illegal or not that's what the county decided and thats what my municipality follows -- If you read the statute it's "at the discretion" of the chief or superintendent

So you did this without 1st speaking to you PD? I sure hope they use the online format. I don't know about other counties but here in Middlesex county the fingerprint requirement is 5 years of inactivity as in if you get at least 1 P2P in 5 years then they don't need another set of prints -- If you wait 5 years and 1 day then you are getting your prints done again -- my local PD follows the county decision on this I believe the way the statute is written fingerprints are at the discretion of the municipality -- the state doesn't need them again but they leave the window open for the chief of police to require them if so desired without needing a reason

I just signed up 2 weeks ago for the Ballistic advantage emails -- I'm waiting for the Hanson 14.5 wylde to go on sale and I think I'm gonna grab one Thinking about pinning a lantac dragon brake to make it legal I just built my version of an SPR -- It's more accurate than me even with 55 grn surplus pulled reloads -- can't wait to see what it will do with 69grn SMK Noveske 16" 1/7 twist stainless -- mid length gas -- AK concepts muzzle brake Noveske Lo pro gas block Noveske matched bolt carried in a Colt FA bolt carrier Mounted on a Larue stealth upper 13.2" larue FF rail -- Harris bipod on quick releases mount -- Magpul AFG GRSC 1X4 scope in a pepr mount for now -- have a bobro mount needing those silly scope mount screws replaced Billet Midwest PX lower Geiselle SSA-e trigger Magpul PRS stock -- Rifle length buffer and tube Ergo grip Stag LPK It is one heavy bastard

I've fired my .45 outdoors without hearing protection -- It hurts I can't imagine what it would be like if I had to fire in the house, small room, hallway -- My muffs are there where they are needed -- If I have time and enough composure I surely will try for them I'm hoping I never have to find out...

I have a pair of electronic muffs at bedside next to the loaded 1911 if I have time for them

The square, tank top, infrared heaters also will blow out in the wind -- and it doesn't take much I'm thinking to get any benefit you would need one of those mushroom type patio heaters

Primary arms regularly has sales on Geissele -- if you don't get it this time there should be another opportunity -- maybe presidents day sale That being said I have 1 SSA and 2 SSA-e triggers all purchased from primary at some sort of sale This past black friday they had the best pricing I have ever seen on them -- I think it was 30% off The SSA-E was $189, maybe $179 -- I had 1 in my cart but never bought it...

The hole will be on the bottom -- shouldn't effect your fire rating at all If you are that concerned you could get Firestop at your local home improvement store -- it's in a caulk tube and used to seal holes in structures where wire or pipes travel from 1 floor to another to slow the spread of fire Where is your safe going to be? 1st floor, second floor, Basement? On a wooden floor or on a concrete slab? On a concrete slab I wouldn't worry about it at all -- The water damage will probably be worse anyway -- as the safe falls thru the 1st floor into the basement which is filled with water from the fire dept putting out the fire -- then the safe sits there for weeks There just guns, they are replaceable

No way I spend that kind of money to feed cases -- I'll build one 1st I have a dillon 650 that came to me from my wife's grandfather -- He had the lower end from dillon fed by a tube with a wooden salad bowl on top The bowl has a hole thru it in the center where the tube enters -- Place the cases in the bowl, shake, and the tube gets filled Works great Just need to either buy the lower end from Hornady or make something -- there's plenty of videos

I just looked up Razor HD -- Vortex 5X20 variable??? -- This can't be what your talking about is it?

I think that Burris PEPR mount is a pound and a half all by itself...

Sign up for Primary Arms email sales flyer -- Right now they have 20% of Geissele -- I think it was black friday where they went to 30%off Just pay attention to their sales -- 20% at almost every holiday sales event with the occasional 30% thrown in

Bugsy -- Creeper tactical -- What a good memory I had bought items from him previously, talked to him on the phone -- all seemed legit then too How about details on building a FAL? -- parts kits availability? I could have my arm twisted....

I maxed out a box from them before the rush-- the 1st rush 3 or 4 years ago -- how long has it been? Was like a $700 plus order all for myself -- right after that stuff started getting hard to find Because of that large order I wasn't ever desperate -- maybe a little short on primers a time or 2 but never desperate Thanks for placing the order Mikey -- Let me know when it gets here, I'll come pickup and get you the cash right away I'm in Middlesex borough -- zip is 08846

Hunter -- you can order whatever powders or primers that you need -- as long as it's in stock at powder valley we're all getting something different -- it's just about sharing a hazmat fee

I'm in no hurry so wait as long as you like -- Big question is do we have a full box?

So how many guys we got into this?

Message sent Looking an 8 pound jug of H110 - $142.50 -- in stock as of this post

I have a 4 pound jug of VV N135 I was hoping to use for a 69 grn SMK in .223 -- just built the noveske barreled rifle and want to see what it will do Does Varget give good, great, or outstanding results with the 69grn heads? I use Ramshot Tac for this -- I would buy another jug if it was available or is available at the time of order -- the "no backorder" makes me think it's hard to find and won't be around for awhile -- I have an unopened 8 pounder and maybe 3 or 4 pounds in an open jug -- far from desperate but hate not having a spare jug or 2

Varget? What do you guys use that in?

Lou that exception is probably just fedex taking their time -- had the exception a few days before christmas -- just fedex losing my package for a few days I agree on the hazmat - I bough 8 pounds of blackthorn 209 last year thru powder valley -- they where the only place that I could find it I hated paying it then, but now this season I have plenty of Muzzle loader powder and it will last me many, many, seasons One thing I usually do is max out the hazmat -- It's not really 48 pounds max -- it's that the hazmat box has to be a certain size and 6 jugs of 8 pounds are what fit physically -- they can go up in weight as long as it fits in that one box -- need another box because it just won't fit then you need another hazmat

Only 1000? Why not get a case of each-- 5000? Then your not looking for primers in a few months I use small rifle primers for pistol too -- CCI 400 in both rifle and pistol

Not the same light as the original post but still good the light in the OP is the high intensity version and one bright little bastard